Shxm78z55n/20 Parts

This replacement cover restores the appliance's protective access panel, keeping internal components shielded from dust, moisture, and accidental contact. It helps maintain safe operation and a finished appearance after service. What it does:

• Covers and protects internal components and wiring behind the access area
• Helps prevent debris and moisture from entering sensitive parts
• Restores the appliance's finished look after repairs or part replacement
• Provides a secure barrier to reduce accidental contact during inspection or maintenance

• One replacement cover

• Disconnect power and water before starting any work
• Remove any fasteners or clips holding the old cover; align and secure the new cover using the original hardware
• If clips or screws are damaged, replace them with OEM-equivalent fasteners

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This insulating part provides a thermal and electrical barrier to protect nearby components and wiring from heat and to help reduce vibration-related contact. It's a simple replacement that restores safe spacing and insulation. What it does:

• Acts as a heat shield to limit heat transfer to adjacent parts and wiring
• Provides electrical insulation to prevent shorting where components are close
• Helps reduce rattling by stabilizing/isolating panels or components
• Supports proper component spacing for safe operation

• Disconnect power to the appliance before starting any repair
• Replace only in the exact original location and orientation
• Handle gently to avoid tearing or compressing the material
• If mounting hardware is damaged or missing, replace hardware per OEM instructions

This replacement insert is a small interior mounting piece that helps secure and align appliance components for reliable operation and a finished appearance. It restores proper fit where worn, loose, or damaged inserts allow rattling or misalignment. What it does:

• Provides a stable mounting or seating surface for adjacent components
• Reduces movement, vibration, or rattling caused by a damaged insert
• Helps maintain proper alignment that supports normal operation of the assembly
• Can prevent further wear to surrounding trim or mounting points when replaced

• One insert

• High-level replacement; typically accessed from the appliance interior
• Use basic hand tools; avoid force that could break surrounding plastic or trim
• Disconnect power (and water for dishwashers) before servicing to reduce shock and injury risk

This replacement frame restores the appliance's front cabinet trim for a clean, finished appearance and helps secure the control panel and door assembly. It's a direct-fit exterior trim piece designed to return proper alignment and protection. What it does

• Provides structural support and alignment for the front panel and control area
• Covers and protects internal edges from dirt, moisture, and impact
• Helps stop rattling or vibration caused by a warped or damaged trim
• Common symptom: visible damage, cracks, loose or misaligned front trim

• Remove power to the appliance before starting work to avoid electrical shock
• Small hand tools typically required; follow OEM disassembly sequence for access
• Handle trim carefully to avoid scratches; use a soft surface to rest parts
• If clips or screws appear damaged, replace them separately.

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This insulating part helps reduce heat transfer and dampen noise inside the appliance, protecting nearby components and improving thermal stability during operation. It replaces worn or missing insulation to help maintain proper performance. What it does:

• Provides thermal insulation to limit heat reaching adjacent components
• Dampens vibration and reduces operational noise
• Helps protect wiring and electronics from heat exposure
• Restores proper clearance and sealing where insulation is required

• Disconnect power and water before starting any repair
• Remove access panels as needed to reach the old insulation; keep track of fasteners
• Position the replacement part exactly as the original, ensuring any adhesive or clips are engaged
• If adhesive backing is required, use only OEM-recommended materials; for torque and placement details

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This tool set provides the specialty tools technicians use to install and service compatible Bosch appliances, helping access fasteners and make precise adjustments without damaging trim or components. What it does:

• Supplies specialty drivers and/or service tools needed for installation and maintenance tasks.
• Used when panels, brackets, or fasteners require non-standard sizes or shapes not handled by common household tools.
• Helps prevent stripped screws and damaged trim during repairs and adjustments.
• Supports safe, accurate alignment and minor adjustments.

• Follow the appliance service manual for proper tool use and procedure.
• Disconnect electrical power and shut off water supply before servicing the appliance.
• Wear appropriate personal protective equipment; use tools only for their intended purpose.
• Do not modify tools; replace damaged or worn tools to avoid injury or damage.

This is a package of 4 wheels.

The lower wheel kit is an OEM part for Bosch dishwashers. This lower wheel kit is designed to smoothly guide dishes in and out of the dishwasher.

Causes of a bad wheel can include wear and tear over time, cracks or breaks in the rollers, misalignment preventing proper motion, or material degradation allowing for stickiness or gumming.

Symptoms of a bad wheel include:

• Dishes not fully entering or exiting the wash chamber
• Scratches or damage to dishware
• Noisy operation of the wheel assembly
• Racks getting stuck

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.