Speedqueen Awn432sp113tw01 Parts

This fabric softener dispenser assembly holds liquid softener and releases it during the rinse cycle. Replacing a cracked, missing, or clogged dispenser restores reliable dispensing, reduces messes, and helps keep the washer tub and laundry free of residue. What it does:

• Holds fabric softener and meters its release during the rinse phase
• Uses a simple siphon action to deliver softener evenly into the tub
• Helps prevent spills, streaks, and build-up from manual pouring
• Common symptoms: softener left in cup after cycle, leaks or drips, cracked/loose cup or cap, residue/odor in dispenser area

• 1 fabric softener dispenser assembly

• Disconnect power to the washer before servicing
• Remove the old dispenser from its mounting point; some models require a twist or releasing locking tabs
• Clean any residue from the mounting area to ensure proper flow
• Align and press the new dispenser firmly until fully seated, then test with a small amount of water

This appliance screw replaces a missing or damaged fastener to secure panels and brackets. With a 10B-16 thread and 0.34-inch length, it restores a tight fit to help reduce vibration, rattles, and loosening.

• Fastens sheet-metal parts, brackets, and covers in the appliance cabinet
• Helps maintain alignment and support of components subject to vibration
• Direct replacement for stripped, rusted, or missing hardware
• Can help resolve symptoms like loose panels, rattling noises, or gaps

• Disconnect power; shut off gas/water as applicable before servicing
• Start threads by hand in the original hole or clip to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping
• If the receiving clip/nut is damaged, repair or replace it for a secure hold

Flexible water inlet hose that connects the washer's water valve to the machine inlet fitting, restoring proper water flow and helping prevent leaks or drips at the valve connection for reliable fills and operation. What it does:

• Routes water from the valve to the washer inlet; replaces worn, cracked or collapsed hose assemblies.
• Stops leaks and drips at the valve connection that can lead to puddling under the machine.
• Use when the washer has reduced or no water fill, visible hose damage, or steady dripping from the valve area.
• Matches OEM part naming/fit for direct replacement when the original hose is the failed component.

• One replacement hose.

• Disconnect power and shut off the water supply before starting any work.
• Place a towel or pan under the area, relieve water pressure, then remove clamps and the old hose.
• Inspect and replace clamps and any O-rings as needed; route the new hose without kinks and secure clamps snugly.
• After installation, restore water and power, run a short fill cycle and check all connections for leaks.

A 10 oz cartridge of OEM-specified sealant used to reseal washer assemblies. It forms a flexible, watertight bead to help stop leaks and restore proper sealing around tubs, boots and related joints. What it does:

• Seals gaps and joints around tubs, door boots and panel seams to reduce water leaks
• Bonds to typical appliance surfaces (metal, rubber, many plastics) for a durable seal
• Helps prevent moisture intrusion that can lead to corrosion or interior water damage
• Supplied to OEM specification for correct form and performance in appliance repairs

• Remove old sealant and thoroughly clean and dry surfaces before applying
• Cut nozzle to size and apply an even bead; smooth with a tool or gloved finger for best contact
• Use gloves and eye protection; work in a well-ventilated area and follow label safety directions
• Allow the sealant to fully cure per the manufacturer's instructions before returning the appliance to service

This inlet deflector directs incoming water inside the top-load washer to help control splash and ensure proper fill distribution. Replacing a cracked or warped deflector restores correct water routing and can reduce leaking or overflow at the inlet. What it does:

• Directs incoming water from the inlet valve into the wash basket to reduce splashback.
• Helps maintain even water distribution during fill cycles.
• Prevents water from pooling near the inlet area that can cause leaks.
• A damaged or missing deflector may cause water to spray, spill, or fill unevenly.

• Disconnect power and shut off the water supply before starting any repairs.
• Inspect the inlet area and any gaskets; replace damaged seals to prevent leaks.
• Typically installs with basic tools; ensure the deflector is seated securely and test for leaks after reassembly.

This left-side white panel end replaces a damaged or worn corner trim on the control console or front fascia to restore appearance and protect edges. Designed to match original fit and finish on compatible Speed Queen units. What it does:

• Covers and protects the left edge of the console/front panel from bumps, wear, and moisture.
• Restores a clean, finished look when the original panel end is cracked, chipped, or missing.
• Helps maintain proper alignment and support for adjacent trim and fasteners.
• Fits in place of the factory left-side panel end for straightforward cosmetic repair.

• Designed for direct replacement; reinstall using original screws/clips when present.
• Inspect adjacent trim and fasteners; replace any damaged clips to ensure secure fit.
• Power down and unplug the appliance before attempting any repairs that require panel removal.

This water pressure switch detects the washer's fill height and tells the control when the tub has reached the correct water level, helping the machine fill properly and avoid overfilling. What it does:

• Senses water/air pressure from the tub to determine fill level
• Sends a signal to the control to stop filling when the correct level is reached
• Commonly diagnosed when a washer overfills, won't fill, or stops mid-fill
• Works as the water-level safety input for the washer's fill cycle

• Disconnect power and shut off the water supply before starting.
• Note hose and electrical connector locations; remove the vacuum/pressure hose and electrical connector to swap the switch.
• Reinstall hose and connector securely; loose vacuum hose can cause incorrect water-level readings.
• After installation, restore power/water and run a test cycle to ensure proper function.

This right-hand white panel end replaces a damaged or worn side cap to restore the washer's appearance and keep the cabinet edge protected. It fits the machine's front panel area and matches factory styling. What it does:

• Covers and protects the right-hand side edge of the front cabinet or console
• Restores the unit's finished appearance after damage, scratches, or missing trim
• Helps prevent exposure of internal edges and wiring along the cabinet side
• Matches factory color and mounting locations for a clean replacement

• Remove power and disconnect the appliance before beginning any repair.
• Minor disassembly of the front panel or console may be required to access mounting tabs.
• Handle edges carefully to avoid cutting yourself or scratching the finish.
• Replace missing or damaged fasteners with matching hardware for secure fit.

This small sealing washer fits the washer's water pressure assembly to help maintain a proper watertight seal at the pressure/valve connection. Replacing a worn washer reduces leaks and helps the fill/pressure system operate as intended. What it does

• Provides a watertight seal at the water pressure/valve connection to prevent leaks.
• Helps maintain correct pressure feedback to the washer's water control system.
• Wear or damage can allow leaking at the valve or inconsistent fill behavior.
• Simple, low-cost part commonly replaced when troubleshooting valve leaks.

• Turn off household water supply and unplug the washer before replacing.
• Remove the valve/pressure fitting carefully and replace the old washer with the new one, making sure it seats flat and undamaged.
• Inspect mating surfaces for debris or damage; clean before reassembly.
• If leaks or fill issues persist after replacement, inspect related seals, fittings, and the pressure switch/valve assembly.

A replacement cord lead-in that routes incoming power into the appliance and provides a secure connection point for the main wiring. Restores reliable electrical feed and helps eliminate intermittent power or no-power issues. What it does:

• Transfers household power from the external cord to the appliance's internal wiring
• Provides a stable inlet connection and strain relief for the incoming power cable
• Commonly replaced for symptoms such as no power, intermittent power, blown fuses, or visible damage/corrosion at the inlet
• Matches OEM fit and mounting for a direct replacement when the part number is correct

• One cord lead-in assembly

• Disconnect all power at the breaker or unplug the appliance before starting work
• Route wires and secure strain relief per OEM guidance; tighten terminal connections firmly but do not overtighten
• If wiring or terminal damage is present, replace or repair per local electrical code

This wave washer is a spring-style spacer used in washer assemblies to apply tension and maintain proper spacing. It controls endplay so parts fit securely and the machine runs smoothly with reduced vibration and noise during wash and spin cycles.

• Provides spring preload to maintain correct spacing in rotating assemblies
• Helps limit endplay that can cause rattling, chatter, or intermittent engagement
• Can help address symptoms like metallic noises, excessive play/wobble, or rough operation during agitation or spin
• Replace if the original washer is flattened, cracked, or missing

• Disconnect power and turn off water before servicing
• Note the exact stack order and orientation of spacers/shims during disassembly
• Install the new wave washer in the same orientation; do not bend or deform it
• Reassemble and hand-rotate components to check for smooth operation before test-running

A size #20 hose clamp used to secure flexible hoses to fittings on laundry appliances, helping prevent leaks and keep hoses firmly attached during operation. Simple, low-profile design for reliable hose connections. What it does:

• Secures washer drain and inlet hoses to fittings to reduce leak risk.
• Prevents hoses from slipping off under pressure or vibration.
• Helps maintain consistent water flow by keeping connections tight.
• Fits standard #20 hose diameter applications commonly used on laundry equipment.

• One size #20 hose clamp.

• Use a flathead screwdriver or nut driver to tighten; turn until snug—do not overtighten to avoid hose damage.
• Inspect hose and fitting for cracks or corrosion and replace if needed before installing the clamp.
• After installation, run a short test cycle and check for leaks; retighten if necessary.
• Disconnect power and water supply before servicing the appliance.

This tall-lip seal fits the outer tub to help keep wash water inside the tub and protect internal components from leaks. It replaces a worn or damaged outer tub seal to restore a watertight tub interface. What it does:

• Provides a watertight seal between the outer tub and adjacent components
• Helps prevent water leaks that can cause floor damage or electrical issues
• Reduces noise and vibration caused by an improperly sealed tub
• Commonly replaced when you see visible seal wear, cracking, or recurring leaks

• One tall-lip outer tub seal (seal pack) as specified by the manufacturer

• Disconnect power and water supply before starting any repair
• Inspect mating surfaces and clean away residue before installing the new seal
• Some models may require partial disassembly of the cabinet or tub; follow the OEM service manual

This is a 1/4-15 x 3/4 hex head screw used to secure components in laundry appliances. It provides a strong, threaded fastening point for panels and brackets so parts stay properly aligned during operation. What it does:

• Fastens panels, brackets, or components where a 1/4-15 x 3/4 hex head screw is specified
• Holds assemblies securely to reduce vibration and movement
• Can be used to replace a worn, stripped, or missing screw to restore proper fit
• Matches OEM thread and length for correct engagement when used as specified

• One 1/4-15 x 3/4 hex head screw

• Disconnect power to the appliance before performing any repairs
• Use the correct hex driver/socket to avoid rounding the head
• Tighten snugly but avoid over-torquing to prevent stripping threads or cracking components
• Replace with the exact part if damaged;

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working