Vmoc205ss Parts

This turntable motor packing is a small rubber/foam cushion that mounts around the microwave turntable motor to damp vibration and hold the motor securely for smooth rotation. It helps reduce noise and prevents motor misalignment. What it does:

• Cushions and secures the turntable motor to the oven cavity or mounting bracket
• Dampens motor vibration to help cut down on humming or rattling noises
• Helps maintain correct turntable alignment so the glass tray rotates smoothly
• Worn or damaged packing can allow excessive movement, noise, or uneven rotation

• Always unplug the appliance before replacing parts to avoid electrical shock
• Remove the cavity trim and motor access panel as needed; handle the motor and plate carefully
• Replace with the exact packing designed for your motor to ensure proper fit and function
• If you see additional damage to the motor or mounting hardware, inspect those parts and replace as required

This replacement magnetron restores microwave energy generation so your oven can heat and cook food properly. Designed as a direct substitute for the listed Viking magnetron assemblies to return microwave output without replacing the entire cavity. What it does:

• Generates the high-frequency microwave energy that heats food inside the oven cavity
• Commonly replaces a weak, noisy, or non-heating microwave where the magnetron has failed
• Helps resolve symptoms such as no heat, sporadic heating, or unusual humming during operation
• Intended for use only in compatible Viking microwave assemblies per manufacturer guidance

• Disconnect power and discharge high-voltage components before servicing; high-voltage capacitors can retain a dangerous charge
• Mounting hardware and waveguide cover may be reused if in good condition; replace damaged covers to avoid arcing
• Follow the manufacturer's service manual or IPL for installation steps

This fan motor powers the blower that circulates air in the appliance, restoring proper ventilation and cooling. Replacing a worn motor helps reduce noise and regain consistent airflow for cooking and exhaust systems. What it does

• Spins the blower wheel to move air through the vent or hood assembly.
• Restores normal ventilation when the fan is slow, noisy, or won't run.
• Prevents overheating by maintaining airflow for components that rely on active cooling.
• Works with the existing blower housing and wiring—matches the OEM function.

• One fan motor

• Disconnect power to the appliance before inspecting or replacing the motor.
• Handle the motor and wiring harness carefully; note wire locations for correct reassembly.
• Use proper tools to remove the blower housing and mounting screws; support the blower wheel during replacement.

This is a replacement open button spring that restores normal pushbutton action and reliable return on affected control panels. It provides the small spring tension needed for a responsive, positive-feel open button. What it does:

• Re-establishes button return and tactile feedback for the open button
• Helps fix a button that feels loose, stays depressed, or doesn't pop back
• Restores consistent contact timing for mechanical pushbutton switches
• Small, simple part used in the control panel/button assembly

• Disconnect power to the appliance before servicing to avoid shock or accidental operation.
• Access may require removing control panel trim or the button cap; keep small parts contained.
• Handle carefully—spring is small and can be easily lost or bent.

This replacement Open button is the panel-mounted push button that operates the appliance's door open function. It restores a worn, sticky, or non-responsive button so the door can be opened from the control panel. What it does:

• Replaces the control-panel push button used to trigger the door-open mechanism.
• Restores a button that is stuck, cracked, or not returning properly after being pressed.
• Helps when the panel does not respond to open commands or the button feels loose.
• Works with the original mounting and tactile action to re-establish normal button operation.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access typically requires removing the control panel or trim; keep track of screws and clips.
• Handle the new button and surrounding bezel gently to avoid damaging the panel finish.
• Test button function after reassembly; if door or latch still fails, further diagnosis may be needed.

This LED light sheet is the thin backlight panel used to illuminate control or display areas. It restores even, bright lighting for readable controls and a finished appearance. What it does

• Provides uniform backlighting for control/display panels
• Replaces failed or dim LED lighting causing unreadable or unevenly lit controls
• Stops flicker or intermittent lighting caused by damaged or worn LED sheets
• Works as the optical diffuser/illumination layer in the appliance's control assembly

• One LED light sheet (single panel)

• Disconnect power to the appliance before servicing to avoid shock
• Handle the sheet by the edges and avoid touching LEDs or circuit traces
• Installation typically requires disassembling the control/display bezel; retain screws and brackets

This oven temperature fuse is a one-time thermal cutoff that protects the oven from overheating by opening the circuit when temperature limits are exceeded. Replacing a failed fuse restores the oven's overheat protection. What it does:

• Acts as a safety thermal cutoff that opens if the oven overheats
• Prevents power from reaching heating elements or controls when tripped
• Commonly linked to symptoms like no heat from the oven or an oven that stops heating unexpectedly
• Restores the oven's temperature-safety function when replaced with the correct part

• One oven temperature fuse

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing back panel or control housing; handle with care to avoid damaging surrounding wiring
• Replace only with the exact OEM part and match mounting/wiring orientation

This cavity temperature fuse (QFS-TA) is a safety thermal cutoff for electric ovens and ranges. It helps stop power to heating circuits when internal temperatures exceed safe levels, protecting the appliance and reducing fire risk. What it does:

• Acts as a one-time thermal cutoff inside the oven cavity to interrupt power if temperatures rise too high.
• Common symptom: oven or broil element does not heat even though controls and power appear normal.
• Common symptom: intermittent heating or a completely non-responsive heating circuit after an overheat event.
• Replaces a failed or tripped temperature fuse to restore proper over-temperature protection (does not reset; replace if open).

• Disconnect power to the appliance at the breaker before servicing.
• Locate the fuse in the oven cavity area or behind the back panel per your model's service instructions.
• Replace only with the exact fuse type; verify continuity before reassembly and restore power only after proper installation.
• If the new fuse opens again, do not repeatedly replace; investigate and repair underlying overheat or control faults.

This is a replacement latch spring for the oven door latch assembly that restores the latch's return tension so the door properly engages and seals. Ideal for repairing latch binding, incomplete closure, or a loose door feel. What it does:

• Provides return tension for the oven door latch so it reliably moves back into the closed position
• Restores proper latch engagement to help the door stay securely closed during use
• Can stop symptoms like a door that won't fully latch, rattles, or feels loose
• Works as a direct-fit component for the latch mechanism when the original spring has stretched or broken

• One latch spring

• Disconnect power (and gas if applicable) before starting any repair to avoid risk of shock or injury
• Typical access requires removing the oven door or inner door panel—refer to your model's service instructions
• Handle edges and glass carefully; use appropriate tools and keep small fasteners organized