Wae/20261/Au/01 Parts

This rear drum motor mounting bushing supports the motor shaft at the back of the tub, keeping the drum aligned and reducing wear. It restores smooth drum rotation and helps reduce noise and vibration when functioning properly. What it does:

• Centers and supports the motor shaft to maintain proper drum alignment.
• Cushions rotating components to reduce squealing, grinding, or scraping noises.
• Helps prevent excess drum wobble and uneven wear on the tub and bearings.
• Can stop intermittent rubbing or burning smells caused by a worn mounting surface.

• Disconnect power before starting and follow all safety precautions; service panels may have sharp edges.
• Access typically requires removing the dryer/heater assembly and drum.
• Inspect mating surfaces and surrounding components (shaft, bearing, seal). Replace any excessively worn parts to prevent repeat failures.
• Use only OEM-recommended parts and fasteners; do not force or press the part in without proper alignment.

This fastening ring secures a rotating or stationary component in place to help prevent movement and vibration. It restores proper fit and alignment so assemblies run quietly and components stay locked in position. What it does:

• Holds shafts, bearings or housings in position to prevent axial movement
• Helps stop rattling, wobble or misalignment caused by a loose retaining component
• Maintains a secure mechanical connection between mating parts
• Used wherever a snap/retaining ring is required to lock a component on a shaft or in a bore

• Disconnect power and water before beginning any repair
• Use the correct pliers or tools for snap/retaining rings to avoid deformation
• Verify the ring matches the OEM part number and seating location before installation

This drain reservoir is the dishwasher plumbing housing that collects and directs wastewater to the drain pump, helping prevent internal leaks and ensuring proper draining. Replace a cracked or clogged reservoir to restore reliable water flow and reduce water under the unit. What it does:

• Funnels wastewater from the tub to the drain pump so the machine can evacuate used water
• Helps contain minor spills and prevents water from reaching sensitive electronics
• Works with the drain pump and hoses to maintain proper drainage
• Commonly causes water pooling under the dishwasher, slow or no drain cycles, or visible leaks when damaged

• Disconnect power to the appliance before starting any repair
• Shut off water supply and remove lower access panels or kickplate as needed
• Handle with care to avoid damaging adjacent hoses, clips, or wiring; replace any worn seals

This replacement hose-pressure chamber routes water to the dishwasher's pressure chamber so the machine can sense and control water level. Restores proper pressure sensing to help prevent overfilling and fill errors. What it does

• Connects the sump/water path to the pressure chamber so the water-level sensor can detect fill height.
• Replaces cracked, pinched, or collapsed hose that can cause inaccurate water-level readings.
• Commonly used when dishwasher shows overfill, won't fill correctly, or reports water-level or pressure-related errors.
• Flexible vinyl tubing designed for routing in tight spaces without kinking.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect nearby fittings and the pressure chamber for wear; replace clamps if damaged.
• Push-fit or clamp the hose securely to both ports; ensure there are no kinks or sharp bends.

This facia panel is the outer trim for the appliance's control area, restoring the unit's finished appearance and protecting internal controls from spills and wear. It helps make your appliance look and operate like new. What it does:

• Covers and protects the control area and buttons from dirt, grease, and moisture
• Restores the appliance's finished front appearance when the original panel is damaged or worn
• Keeps control components securely enclosed to prevent accidental contact or damage
• Compatible with units that list this part number for cosmetic/control-area replacement

• One facia panel

• Installation requires removing the old panel and fastening this panel in place; follow manufacturer instructions
• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Use appropriate hand tools and avoid overtightening fasteners to prevent cracking the panel

This window frame is the door trim piece that holds and secures the viewing glass, restoring the door's fit and finished appearance. Use it to replace a cracked, warped, or missing frame so the door closes and looks correct. What it does:

• Secures the viewing glass in the appliance door and maintains a flush exterior finish
• Helps keep the glass aligned so the door seals and closes properly
• Restores the door's cosmetic appearance when the original frame is cracked, dented, or worn
• Provides the structural support needed around the window opening to prevent rattling or movement

• Disconnect power and follow manufacturer safety guidelines before starting any repair
• Handle glass carefully; wear gloves and eye protection to avoid cuts
• Require removing the door panel and a few screws or clips—retain original fasteners unless replacements are provided

This replacement dispenser housing holds the dishwasher's detergent cup and supports the dispenser mechanism so detergent is released during the wash cycle. Use it to restore proper detergent containment and release. What it does:

• Replaces a cracked, broken or warped dispenser housing that can leak or fail to secure the detergent cup
• Supports the dispenser latch and spring so the detergent cup opens at the correct time
• Prevents water intrusion into the dispenser area that can cause poor detergent release
• Helps eliminate symptoms like detergent remaining in cup, visible leakage from the dispenser area, or intermittent dispenser operation

• One dispenser housing

• Disconnect power and water supply before starting any repair
• Remove the door inner panel to access the dispenser; handle panels and fasteners carefully to avoid damage
• Inspect dispenser gasket, latch and mounting screws and replace if worn; reassemble ensuring correct alignment for the latch and cup

This window frame is the exterior trim that surrounds an appliance door window, restoring the door's sealed appearance and helping keep the viewing area aligned. It replaces damaged or cracked trim to improve fit and finish. What it does:

• Covers and secures the perimeter of the door window, holding glass and inner components in place
• Restores a smooth, finished look when the original frame is cracked, warped, or broken
• Helps reduce rattling or light leaks around the door viewing area
• Supports safe handling of the door assembly by maintaining proper alignment

• One replacement window frame

• Disconnect power and follow appliance-specific safety procedures before starting
• Handle any glass pieces carefully; wear gloves and eye protection
• Basic hand tools typically required; refer to your model's service manual for exact steps