Wap20160sg Parts

This water inlet hose gasket seals the connection between the supply hose and the appliance's inlet fitting. Replace a flattened or damaged washer to stop drips at the coupling and restore a reliable, watertight connection.

• Creates a watertight seal at the inlet hose-to-appliance connection
• Helps prevent drips, puddles, and water damage around the machine
• Replace if the old gasket is cracked, hardened, flattened, or missing
• Common symptoms: leaking at the hose coupling or needing to retighten the fitting to stop drips

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water, then detach the inlet hose from the appliance fitting
• Remove the old gasket from the hose coupling and seat the new gasket evenly
• Reattach and hand-tighten the coupling; open water supply and check for leaks—do not overtighten

This programme knob is the user control for selecting cooking or cycle programs, restoring tactile control and clear position feedback. It provides a simple replacement for a worn, cracked, or missing selector knob. What it does

• Lets you rotate and select appliance programs or settings with a clear detent feel
• Replaces broken, loose, or stripped knobs that don't engage the control shaft
• Restores accurate visual indication of the selected program position
• Commonly fixes symptoms like unresponsive or slipping knobs and difficulty changing settings

• One programme/control knob

• Disconnect power to the appliance before servicing; follow safety instructions in your owner's manual
• Often pulls straight off the control shaft; some models use a retaining clip or set screw—inspect the shaft before removal
• If a set screw is present, remove or loosen it with the correct screwdriver before pulling the knob
• Do not force the knob; align splines and push on straight to seat fully

This glass front panel replaces a cracked or damaged outer door surface to restore appearance and protect internal components. It provides the visible exterior surface for the appliance door and keeps the interior sealed from everyday wear. What it does:

• Replaces broken, cracked, or scratched outer door glass to restore the appliance's exterior
• Protects controls and internal layers behind the door from impact and debris
• Restores a smooth, easy-to-clean surface and original appearance
• Helps prevent sharp edges or glass fragments from exposing internal parts

• Handle carefully; wear cut-resistant gloves and eye protection to avoid injury from sharp edges
• Remove power to the appliance before starting any disassembly
• Follow OEM disassembly instructions for removing the door assembly and separating layers—do not force components
• If adhesive or clips are used, replace any damaged fasteners and allow adhesives to cure per manufacturer guidance

This transit bolt secures internal components during transport to prevent shifting or damage while moving or shipping an appliance. It's a simple fastener used to keep drums, tubs or assemblies stable until the appliance is installed. What it does:

• Holds the drum/tub or internal assembly in place during shipping and handling to reduce movement.
• Prevents rattling, banging or internal impact damage that can occur in transit.
• Helps avoid misalignment or wear caused by unsecured parts during shipment.
• Should be removed before first use to allow normal appliance operation.

• Install only for transport; remove prior to using the appliance and store for future moves.
• Tighten securely but avoid over-torquing to prevent damage to threads or mounting points.

This fixing kit supplies the mounting and fastening hardware used to secure appliance components during installation or repair, helping restore proper fit and reduce vibration or loose panels. Ideal for replacing missing or damaged fasteners. What it does

• Provides the specific screws, clips, and brackets used to anchor panels or assemblies
• Stops rattling and vibration caused by loose or missing mounting hardware
• Restores proper alignment of doors, panels, or internal components
• Replaces worn or corroded fasteners that can compromise a secure fit

• Disconnect power and water before beginning any repair work
• Use proper tools and follow the appliance manufacturer's installation instructions
• Inspect surrounding components and mounting surfaces; replace any damaged parts

This coupling connects the dishwasher motor to the wash pump so the motor can drive the impeller for normal water circulation. Replacing a worn coupling restores drive between motor and pump and helps the dishwasher pump water effectively. What it does:

• Transfers rotational force from the motor to the pump impeller for wash and drain cycles
• Prevents slipping when the motor runs, ensuring consistent water circulation
• Commonly replaced when the motor runs but the pump doesn't turn or performance is reduced
• Can help stop grinding, clunking, or unusual noises coming from the pump area

• Disconnect power to the appliance before any service to avoid shock or injury
• Access usually requires removing the access panel and/or pump housing—follow OEM service instructions
• Inspect the surrounding seals and pump components when replacing the coupling; replace any damaged parts

This flexible inlet/fill hose routes water into the appliance, restoring proper water delivery for normal operation. Replace a damaged hose to stop leaks and ensure reliable water flow. What it does:

• Carries incoming water from the supply to the appliance fill assembly
• Prevents water leaks when intact; a cracked or split hose can cause pooling or drips
• Restores normal fill behavior when worn or collapsed hoses reduce flow
• Works with clamps or fittings at each end to create a watertight seal

• One flexible inlet/fill hose

• Turn off the water supply and disconnect power before removing the old hose
• Inspect and replace any worn clamps, gaskets, or fittings for a secure seal
• Hand-start fittings, then tighten with tools—avoid over-tightening to prevent damage
• After installation, restore water and power, then run a short cycle and check for leaks

This upper dispenser tray holds and positions detergent and rinse aid cups in the dishwasher door so detergents release correctly during the wash cycle. Fits upper-door dispenser assemblies to restore proper dispensing and cleaner wash results. What it does:

• Provides the correct mounting and alignment for detergent and rinse-aid cups during cycles
• Ensures detergent doors open and close reliably for measured release
• Helps prevent detergent residue from spilling into the tub when closed
• Commonly replaces cracked, warped, or damaged trays that cause poor dispensing

• One upper dispenser tray

• Designed for replacement inside the dishwasher door; access typically requires removing the inner door panel
• Disconnect power and water to the appliance before beginning any repair
• Inspect dispenser actuator and springs while replacing the tray and replace any worn components

This pressure-chamber hose routes the dishwasher's tub pressure signal to the water-level chamber so the control can detect fill level and stop filling when appropriate. It helps restore proper fill control and reliable cycle operation. What it does:

• Carries air/water pressure from the tub to the pressure chamber for accurate water-level sensing
• Enables the dishwasher to detect full/overfill conditions and stop the fill valve
• Can prevent overfilling, continuous filling, or erratic cycle behavior when functioning
• Failures may cause fill errors, long fill times, or incorrect cycle operation

• One pressure chamber hose (single replacement hose as shown)

• Disconnect power and water supply before servicing the dishwasher
• Access may require removing lower kickplate and/or tub access panels per your model service instructions
• Inspect hose routing and clamps; replace any damaged clips and ensure hose is free of kinks when installing

This pressure chamber is the molded air chamber that works with a dishwasher's water-level sensing system to help the appliance detect correct fill levels and maintain reliable wash performance. What it does:

• Forms the air pocket used by the water-level sensor/pressure switch to detect fill height
• Helps prevent overfilling or underfilling by transmitting pressure changes to the sensor assembly
• Can be replaced when cracked, collapsed, or blocked by debris or hard-water buildup
• Compatible with systems that use an external pressure tube and sensor/switch for water sensing

• Disconnect power and shut off the water supply before beginning service.
• Handle the chamber and any attached tubing gently to avoid kinks or damage; ensure a tight, leak-free connection to the sensor.
• Inspect and replace any brittle or clogged tubing and seals during installation.