Wap24021uc/11 Parts

This coupling connects the dishwasher motor to the wash pump so the motor can drive the impeller for normal water circulation. Replacing a worn coupling restores drive between motor and pump and helps the dishwasher pump water effectively. What it does:

• Transfers rotational force from the motor to the pump impeller for wash and drain cycles
• Prevents slipping when the motor runs, ensuring consistent water circulation
• Commonly replaced when the motor runs but the pump doesn't turn or performance is reduced
• Can help stop grinding, clunking, or unusual noises coming from the pump area

• Disconnect power to the appliance before any service to avoid shock or injury
• Access usually requires removing the access panel and/or pump housing—follow OEM service instructions
• Inspect the surrounding seals and pump components when replacing the coupling; replace any damaged parts

This flexible inlet/fill hose routes water into the appliance, restoring proper water delivery for normal operation. Replace a damaged hose to stop leaks and ensure reliable water flow. What it does:

• Carries incoming water from the supply to the appliance fill assembly
• Prevents water leaks when intact; a cracked or split hose can cause pooling or drips
• Restores normal fill behavior when worn or collapsed hoses reduce flow
• Works with clamps or fittings at each end to create a watertight seal

• One flexible inlet/fill hose

• Turn off the water supply and disconnect power before removing the old hose
• Inspect and replace any worn clamps, gaskets, or fittings for a secure seal
• Hand-start fittings, then tighten with tools—avoid over-tightening to prevent damage
• After installation, restore water and power, then run a short cycle and check for leaks

This door lock assembly secures the appliance door during operation so cycles can run safely and reliably. It replaces a worn or broken latch to restore proper door closure and locking action. What it does:

• Secures and latches the appliance door so the unit can start and run
• Prevents the door from opening mid-cycle, reducing leaks and interruptions
• Common fix for door-not-locking, door won't stay closed, or related error codes
• Works as the mechanical/electrical interface that detects a closed door

• Disconnect power before beginning any repair to avoid shock
• Handle carefully; avoid forcing the latch or twisting mounting tabs
• Verify correct orientation and engage mounting screws securely but not overtighten

This upper dispenser tray holds and positions detergent and rinse aid cups in the dishwasher door so detergents release correctly during the wash cycle. Fits upper-door dispenser assemblies to restore proper dispensing and cleaner wash results. What it does:

• Provides the correct mounting and alignment for detergent and rinse-aid cups during cycles
• Ensures detergent doors open and close reliably for measured release
• Helps prevent detergent residue from spilling into the tub when closed
• Commonly replaces cracked, warped, or damaged trays that cause poor dispensing

• One upper dispenser tray

• Designed for replacement inside the dishwasher door; access typically requires removing the inner door panel
• Disconnect power and water to the appliance before beginning any repair
• Inspect dispenser actuator and springs while replacing the tray and replace any worn components

This is a replacement door handle that restores a secure, easy-to-grip opening for your appliance door. It matches the original fit and finish to keep the door looking and working like new. What it does:

• Replaces a worn, cracked or broken door handle to restore safe opening and closing
• Provides a secure grip to prevent slips or accidental drops when opening the door
• Matches original mounting points so the door closes and seals properly when reinstalled
• Helps eliminate rattling or loose-handle noise caused by damaged hardware

• One door handle

• Follow the appliance OEM service manual for disassembly and reassembly steps
• Power off and unplug the appliance (or turn off gas/water as applicable) before starting
• Use the correct tools and retain all fasteners; do not overtighten mounting screws

This rubber sealing ring replaces a worn or damaged seal to help stop water leaks and maintain a tight fit where two appliance parts meet. It's a direct-fit replacement designed for reliable sealing performance. What it does

• Creates a watertight barrier at the mating surface to prevent leaks and drips
• Restores proper sealing pressure when the original seal is cracked, flattened, or brittle
• Helps prevent water damage and maintains appliance efficiency by stopping unintended water escape
• Common symptom: visible leaking, dripping, or moisture collecting near a joint or connection

• One rubber sealing ring

• Disconnect power and shut off water supply before starting any repair
• Remove the old seal completely and clean mating surfaces of debris, residue, or mineral buildup
• Inspect the mounting area for damage; replace any damaged components before installing the new seal
• Press the new seal evenly into place; test for leaks by running a short cycle and checking the connection

This replacement fixture assembly secures internal components and restores proper alignment and fit in compatible appliances. Replacing a worn or damaged fixture helps stop noise, prevent rubbing, and maintain safe operation. What it does:

• Holds adjacent parts in the correct position to prevent movement and misalignment
• Reduces rattling, vibration, or scraping noises caused by loose or broken supports
• Helps maintain door/panel fit and seals where applicable
• Restores the original mounting function to prevent further wear on connected components

• Disconnect power and water before beginning any repair
• Use basic hand tools; follow service manual or tech sheet for exact disassembly steps
• Handle carefully to avoid damaging surrounding trim, wiring, or seals

This outer housing cover protects internal components and finishes the appliance exterior, helping keep dirt and moisture out while maintaining a clean, safe appearance. Fits original equipment to restore proper enclosure. What it does:

• Shields internal wiring, controls, and mechanisms from debris and accidental contact
• Helps prevent moisture and grime from reaching sensitive parts
• Restores the appliance's exterior appearance when the original cover is cracked or missing
• Can reduce drafts or minor vibration paths when installed correctly

• One outer housing cover

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate hand tools; retain all fasteners for reassembly
• Inspect adjoining seals and mounting points; replace damaged hardware as needed

A push button set for the range/oven control panel that restores tactile button function and appearance. Replaces worn, cracked, or missing control buttons to help ensure reliable user input. What it does:

• Replaces the physical buttons on the appliance control/display panel
• Restores tactile feel and proper actuation when selecting functions or settings
• Helps fix buttons that are cracked, sticking, loose, or cosmetically damaged
• Useful when individual buttons no longer depress or return reliably

• Disconnect power to the appliance before starting any repair
• Remove control panel or trim to access the button assembly
• Handle trim and lens pieces gently to avoid cracking or scratching

This pressure chamber hose connects the dishwasher's water-level pressure chamber to the control/pressostat, allowing accurate water-level sensing for reliable cycle operation. Replaces damaged or clogged hoses that can cause incorrect water sensing. What it does:

• Transfers pressure from the water chamber to the pressure sensor so the appliance detects correct fill levels
• Commonly replaced when a cracked or blocked hose causes incorrect fill, overflowing, or cycle interruptions
• Helps restore proper water-level sensing and prevents false overfill/underfill indications
• Works as part of the pressure-sensing assembly—does not include sensors or clamps unless specified

• One pressure chamber hose

• Disconnect power and water supply before attempting replacement
• Inspect and remove any kinks, debris, or buildup that could restrict pressure flow
• Ensure secure, leak-free connections at both ends and use original-style clamps if required

This lower dispenser tray fits inside the dishwasher detergent dispenser and provides a stable catch and guide for detergent and rinse aid, helping the dispenser operate cleanly and reliably. Replaces a cracked or warped tray to reduce leaks and residue buildup. What it does:

• Holds and positions the lower portion of the detergent/dispenser assembly for proper door sealing and release
• Directs detergent and rinse aid into the wash chamber when the dispenser opens
• Helps prevent leaks and pooling that can cause poor detergent release or residue
• Restores proper alignment if the original tray is cracked, broken, or deformed

• Disconnect power to the appliance before starting any repair
• Remove the dishwasher door inner panel or dispenser bezel as required to access the dispenser assembly
• Handle parts gently to avoid damaging clips and seals; replace any worn gaskets