Wdt770pay Parts

This tub wheel assembly supports and guides a dishwasher rack as it rolls in and out, helping the rack glide smoothly and preventing binding or derailment during loading and unloading.

• Provides a rolling contact point mounted on the dishwasher tub for the rack/track system
• Helps restore smooth rack movement if wheels are worn, cracked, or seized
• Can address symptoms like a sticking rack, rough travel, or a rack that pops off track
• Reduces strain on rack adjusters and tracks caused by dragging or misalignment

• Disconnect power and turn off water before servicing
• Open the door and support the rack/track as needed to relieve pressure
• Remove the fastener/retainer, swap the wheel assembly, and verify free movement
• Test rack travel fully in and out before restoring power

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

Size: 8-18 x 1/2 inch.

Replacement clip that secures the dispenser guard on compatible Whirlpool refrigerators. Replacing a damaged or missing clip restores a secure dispenser trim and can reduce rattling or misalignment around the dispenser area. What it does:

• Secures the dispenser guard/trim to the dispenser assembly to keep the trim aligned.
• Commonly needed when the guard is loose, rattling, cracked or falls out.
• Replaces broken or missing clips that allow the dispenser trim to move or vibrate.
• Helps restore proper fit of the dispenser trim so the dispenser components sit flush.

• Disconnect power (unplug or turn off the circuit) and shut off the water supply if working near the water/ice dispenser.
• Remove the dispenser trim or guard per the model's service instructions; handle plastic parts gently to avoid cracking.
• Align the clip with the mounting slot and engage until seated; if access is limited or the guard is damaged, follow safety guidelines when servicing appliances.

This retainer secures the FlexRow fold-down tine assembly on the dishwasher rack, keeping the row attached and stable so dishes stay where you position them. Replace a damaged or missing retainer to restore proper rack function.

• Holds the FlexRow tine row to the rack and supports correct up/down positioning
• Helps prevent the tine row from detaching or flopping during cycles
• Replace when cracked, worn, or missing
• Common symptoms: tines won't stay up, loose/misaligned row, items tipping over in the rack

• Disconnect power to the dishwasher before servicing
• Pull the rack forward; release and remove the damaged retainer
• Align and snap the new retainer onto the rack wires and FlexRow hinge until fully seated
• Inspect adjacent rack/tine parts for damage

This factory fastener is a #10-16 screw used to secure appliance panels and components. Replacing worn or missing hardware restores a tight fit, helps prevent rattles, and keeps parts properly aligned for dependable operation.

• Secures brackets, panels, and covers to the cabinet or frame
• Replaces missing, stripped, or corroded mounting hardware
• Helps reduce vibration and rattling from loose mounts
• Correct 10-16 thread to match designated OEM mounting points

• Disconnect power and shut off water or gas supply before servicing
• Match the screw to the original location using your model's diagram
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• If replacing multiple screws, swap one at a time to maintain alignment

This sump assembly with seal replaces the washer's pump housing to help route drain water and keep the tub sealed. Restores proper drain flow and helps prevent leaks when the original housing or seal fails. What it does:

• Houses the drain pump and channels wash water toward the drain pump
• Integrated seal helps prevent water leaking from the tub-to-pump connection
• Use when you see water pooling under the washer or steady leaks during or after a cycle
• Can resolve symptoms like poor draining, intermittent pump noise, or visible leaks at the base

• Disconnect power and shut off water before starting any repairs
• Use basic hand tools to remove hoses and mounting fasteners
• Inspect nearby hoses and clamps while replacing the sump; test a short cycle to check for leaks after installation

A pronged cup washer that secures and cushions mating parts on appliances, restoring proper fit and reducing wobble. Replaces worn or damaged cup-style washers to help maintain stable component alignment and reliable operation. What it does:

• Fits into a cup or socket to hold shafts, knobs, or trim pieces in place
• Pronged design grips the mounting surface to prevent rotation and slippage
• Helps reduce vibration and noise caused by loose or worn washers
• Commonly used when a knob, shaft, or trim feels loose or wobbly

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the related knob or trim carefully to access the washer; note orientation for correct reassembly
• Press the washer fully into the cup or socket so the prongs engage the mounting surface
• Inspect the surrounding components for wear and replace any damaged parts

This dual BR2 positioner secures and aligns linked components so moving assemblies operate smoothly and reliably. Replaces a worn or broken positioner to restore correct part orientation and reduce misalignment-related issues. What it does:

• Holds and indexes two linked components to maintain correct alignment during cycles
• Helps prevent binding, noisy operation, or mis-positioned parts
• Restores proper mechanical engagement after breakage or wear
• Works as the mounting/locator piece that keeps assemblies in their intended position

• Disconnect power to the appliance before starting any repair
• Remove the appropriate access panels to reach the old positioner; keep fasteners organized
• Note wiring or linkage locations (take a photo) before removing the old part for proper reassembly
• Reinstall panels and restore power; test the appliance to verify correct operation

This dispenser cover is the replacement lid for a washer dispenser assembly, restoring a secure, functional cover that keeps detergent and fabric softener contained until the wash cycle. It helps prevent spills and keeps the dispenser looking finished. What it does:

• Replaces a cracked, warped, or missing dispenser lid so the dispenser closes properly
• Helps contain detergent and softener to prevent drips and spills onto the washer top
• Restores a flush, finished appearance to the dispenser area
• Works with the dispenser housing to ensure proper release of cleaning agents during cycles

• Disconnect power and water supply before servicing the washer
• Replacement typically installs with clips or screws; keep original fasteners and note their placement
• Handle plastic parts carefully to avoid cracking; align tabs before snapping into place

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

Size: 8-32 x 1/2 inch.

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

This vent door bezel covers and directs exhaust airflow at the appliance vent opening, helping maintain proper venting and preventing large debris from entering the duct. Replacement restores correct vent closure and airflow path. What it does:

• Covers the external vent opening and guides exhaust air away from the appliance
• Helps prevent large debris, pests, and items from entering the vent
• Restores a properly closing vent flap that can reduce backflow and improve venting
• Worn, broken, or stuck vent bezel can cause reduced air exhaust or visible gaps at the vent opening

• Disconnect power (and gas if applicable) before starting any repair
• Inspect surrounding seals and mounting tabs; replace if damaged to ensure a proper fit
• Handle plastic parts carefully to avoid cracking; use proper fasteners and torque to OEM specs

This retainer secures a component or panel in place to maintain proper alignment and reduce vibration. It helps keep parts seated so the appliance operates quietly and reliably. What it does:

• Holds a panel, trim, or small component in position to prevent shifting or rattling
• Maintains proper alignment for connected parts and fasteners
• Helps stop intermittent noise caused by loose fittings
• Supports a secure fit after repair or wear-related replacement

• Disconnect power (and gas if applicable) before servicing the appliance
• Use basic hand tools to remove surrounding panels and access the mounting location
• Inspect mating edges and clips for damage; replace any broken fasteners
• Wear gloves to protect hands from sharp sheet metal and edges