Wed5100ca Parts

This white front door panel replaces a damaged or worn exterior door and restores the appliance's appearance and sealing surface. It matches the original panel shape and finish for a factory look. What it does

• Replaces a cracked, dented, chipped or otherwise damaged front door panel
• Restores the appliance's exterior finish and helps maintain proper door alignment
• Provides the factory surface for attaching original trim, hinges and handles
• Improves appearance after impact or long-term wear

• One white front door panel

• Disconnect power and water before beginning work
• Some trim, handles or hinges may need to be transferred from the old door; inspect fasteners and hardware
• Handle panels carefully to avoid scratching the finish during installation
• Tighten fasteners to manufacturer torque specs and check door alignment after installation

This dryer vent directs exhaust air from the dryer to the home's venting system to restore proper airflow and help maintain safe drying performance. Use when the original vent is damaged, bent, or missing. What it does:

• Channels hot, moist air from the dryer to the exterior vent to prevent backflow into the laundry area
• Restores proper airflow that can reduce long drying cycles and excess heat buildup
• Helps keep lint and moisture moving out of the cabinet area when used with regular lint-trap maintenance
• Replaces cracked, crushed, or corroded vent parts that cause poor venting

• Disconnect electrical power (and shut off gas supply for gas dryers) before starting any work
• Install only with the correct vent length and profile for your dryer; avoid sharp bends and compressing the duct
• Secure connections with appropriate clamps or fasteners and check for leaks or obstructions after installation
• Clean the lint trap and inspect the vent path regularly to maintain safe operation

This inner oven door glass provides a clear, heat-resistant viewing panel so you can monitor cooking without opening the door. Restores the oven door's visibility and helps maintain proper oven sealing when installed correctly. What it does:

• Replaces the inner glass panel that fits inside the oven door assembly.
• Allows safe viewing of food while helping the door retain heat.
• Commonly replaced when glass is cracked, chipped, or fogged.
• Helps prevent heat loss and supports proper oven operation when intact.

• One inner oven door glass panel (single piece as shown)

• Handle carefully—tempered glass can shatter if dropped or struck.
• Follow the oven manufacturer's service manual for disassembly/reassembly steps.
• Disconnect power to the appliance before beginning any repair.
• If clips, gaskets, or mounting hardware are damaged, replace them as needed.

This control knob is the direct-replacement selector used to turn and set cycles or functions on compatible Whirlpool controls, restoring reliable user operation and tactile feedback. What it does

• Replaces a worn, cracked, or loose selector knob so the control can be turned and set easily
• Provides a secure grip and positive detent for selecting cycles or settings
• Prevents slipping or unintended changes to cycle selection
• Restores the original look and user interface of the control panel

• One knob assembly

• Disconnect power to the appliance before beginning any work
• Pull the old knob straight off the shaft; align splines on the new knob and push on until fully seated
• If knob does not seat, check shaft orientation and for debris—do not force into place

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This rear panel replaces the cabinet back on compatible Whirlpool appliances to protect internal components and close the cabinet for proper airflow and safety. It restores the appliance's enclosure and keeps wiring and controls covered. What it does:

• Covers and protects internal parts at the back of the appliance from dust and physical damage
• Helps maintain proper airflow paths for cooling and ventilation
• Restores the appliance cabinet for a finished appearance
• Can reduce vibration-related noise by securing rear components

• One rear panel as described

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove access panels and mounting screws to replace the rear panel; retain hardware
• Handle sharp edges carefully and wear gloves to avoid cuts
• Note wiring or components are tucked to the panel, their routing before removal and restore exactly

(18"- 29")

Approximately 8 feet.

This drum hole plug seals an unused or service access hole in the dryer drum to help prevent clothing snags and reduce interior airflow leaks. Simple replacement restores the drum surface and helps keep items from catching. What it does:

• Covers a drum access/service hole to provide a smooth interior surface
• Prevents fabric from catching or tearing on open drum holes
• Reduces unwanted air leakage through the drum
• Helps maintain normal drum rotation contact points by keeping openings closed

• One drum hole plug

• Disconnect power to the appliance before starting any repairs
• Inspect the drum area and remove any debris before installing the plug
• Press or snap the plug into the hole until fully seated; replace if damaged or deformed

This incandescent illumination element restores visible lighting for compatible Whirlpool appliances, improving control-panel and interior visibility. It's a simple replaceable light element for appliances that use small incandescent lamps. What it does:

• Provides warm, steady light for control panels, displays, or interior areas
• Replaces burned-out or flickering incandescent lighting
• Common symptom: no light or dim light from the panel or interior lamp
• Works as a direct-fit lighting element when the correct part number is used

• Disconnect power before accessing or replacing the lamp to avoid shock
• Allow the lamp and surrounding area to cool before removing
• Handle the lamp carefully; avoid touching glass with bare hands when possible
• Replace only with the exact OEM part number to ensure fit and function

This metal hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and hose detachment. It's a compact replacement part for appliances that use band or spring-style clamps on hose connections. What it does:

• Holds a hose firmly on a barb or nipple to maintain a watertight connection
• Prevents leaks or dripping at hose junctions caused by loose fittings
• Reduces hose movement and vibration that can lead to wear or disconnection
• Works wherever a small appliance hose clamp is required

• Turn off and unplug the appliance and shut off water supply before starting
• Release hose pressure and drain residual water before removing the old clamp
• Use appropriate pliers or a screwdriver for the clamp type; avoid over-tightening