Wet3300xq Parts

This hex nut secures fasteners on compatible Whirlpool appliances to keep panels and components held firmly in place. It's a simple replacement that stops loose parts and restores proper fit and function. What it does:

• Threads onto corresponding bolts or studs to lock panels, brackets, or assemblies.
• Stops vibration-related loosening that can cause rattling or misaligned parts.
• Helps re-secure components after service or collision damage.
• Use when the original nut is stripped, missing, or damaged.

• Disconnect power and unplug the appliance before servicing electrical components.
• Use the correct size socket or wrench to avoid rounding the nut.
• Tighten securely but do not overtighten; replace with matching thread and grade if specified by the OEM.
• If the original fastener was seized or damaged, inspect the mating bolt/stud and replace as needed.

This agitate gear washer is a small flat washer used with the washer's agitate gear to ensure proper spacing and smooth engagement. It helps maintain correct gear alignment so the agitator can move laundry effectively. What it does:

• Provides a stable spacer between the agitate gear and mating components to prevent excess play
• Helps maintain correct gear alignment for consistent agitator movement
• Reduces metal-on-metal contact that can cause noise or premature wear
• Commonly replaced when the agitator feels loose, makes grinding noise, or causes uneven agitation

• High-level replacement: remove agitator/gear per service manual to access washer; reinstall in original orientation
• Use manufacturer torque/settings for reassembly; do not overtighten
• Inspect adjacent gear and splines for wear; replace any damaged components
• Disconnect power and follow safety procedures before servicing the washer

This drum assembly replaces a worn or damaged dryer drum to restore proper tumbling and prevent fabric damage. Durable stamped steel construction helps maintain smooth rotation and even drying for front-load dryers. What it does:

• Replaces a dented, cracked, or bent drum that can catch or tear clothing
• Restores smooth tumbling to eliminate scraping, rubbing, or loud metal-on-metal noises
• Helps maintain proper airflow and even drying when the original drum is damaged
• Works with existing rollers, seals, and support components when those parts are in good condition

• Disconnect power (and gas, if applicable) before beginning any repair
• Handle the drum carefully—edges can be sharp; use gloves and eye protection
• Some disassembly of the dryer cabinet and removal of front bulkhead may be required
• Inspect and replace worn rollers, glides, or seals as needed for best results; test operation after reassembly

This cycle selector switch lets the user choose wash or dry cycles by turning the control dial. It restores reliable cycle selection and responsive dial behavior so the machine starts the intended program. What it does:

• Selects the appliance cycle position when the control knob is turned
• Sends the chosen cycle signal to the timer/control assembly
• Commonly replaced when the dial slips, feels loose, or won't advance between cycle positions
• Helps resolve issues where the machine won't start the selected cycle or changes settings unexpectedly

• Disconnect power (and water if a washer) before servicing
• Access typically requires removing the control console or panel; follow your model service manual
• Avoid bending terminals; match connector orientation during reassembly

Size: 6 - 20 x 1 1/16 inch.

Rubber seal that creates a watertight barrier between the appliance door and tub, helping prevent leaks and keep moisture and debris out. Replace a worn or torn seal to restore proper sealing and reduce the risk of water damage. What it does:

• Forms a flexible, leak-resistant seal around the door/tub opening to keep water and detergent inside.
• Helps reduce odors and debris entry by keeping the chamber closed from outside contaminants.
• Common symptoms: visible cracks or tears, water pooling under the appliance, persistent dampness or mold around the door area.
• Restores reliable sealing to help protect floors and nearby cabinetry from moisture damage.

• Disconnect power and shut off the water supply before beginning any repairs.
• Remove the old gasket carefully, clean the mounting surface, and inspect for any damage before installing the new seal.
• Seat the new seal fully and evenly around the opening to ensure a watertight fit; check the appliance for leaks after first cycle.

This hinge pin assembly provides the pivot point for your door, keeping it aligned on the hinge and allowing smooth opening and closing. Replacing a worn pin restores proper door movement and helps maintain a reliable seal.

• Creates the pivot for the door to rotate smoothly on the hinge
• Maintains door height and alignment for consistent gasket contact
• Helps prevent sagging, rubbing, or gaps that can affect sealing
• Common symptoms include clicking/popping at the hinge, door wobble, or difficulty closing

• Disconnect power and support the door before servicing
• Note hinge orientation and the placement of any spacers/washers; transfer as needed
• Secure fasteners without overtightening to avoid binding
• After installation, verify door alignment and gasket seal

This bulkhead is the front interior panel that supports the drum and helps direct dryer airflow for efficient tumbling and exhaust. It restores proper drum alignment and airflow when the original panel is worn or damaged. What it does:

• Provides a stable mounting surface for the drum and front bearing/glide assembly
• Helps channel air from the drum to the exhaust path for consistent drying
• Prevents drum wobble and rubbing that can cause noise or fabric wear
• Reduces air leaks and hot spots that can extend dry times or trigger heat issues

• One bulkhead panel

• Disconnect power and venting before beginning any repair
• Removing the front panel and drum is typically required to access and replace the bulkhead
• Inspect drum seals, rollers, and bearings while the dryer is open; replace any worn components
• Use appropriate tools and follow OEM instructions.

This HiLight hotplate is a single radiant cooktop element that restores heating on compatible glass-top ranges. It replaces a failed or damaged hotplate so cookware can heat evenly and burners function reliably again. What it does:

• Replaces a cracked, non-heating, or intermittently heating HiLight hotplate
• Provides the radiant heating surface under glass-ceramic cooktops
• Fixes symptoms such as a burner that won't glow, uneven heating, or no heat from one cooking zone
• Works with the existing element connections and retaining hardware on compatible cooktops

• Disconnect power to the cooktop at the breaker before servicing
• Handle glass-ceramic tops carefully to avoid chipping or cracking when removing/installing the element
• Verify the part number on the old element before installation

This hinge bracket secures a refrigerator door hinge to the cabinet, restoring proper door alignment and support so the door seals and closes reliably. Designed to replace a worn, bent, or broken hinge mounting bracket. What it does:

• Provides a stable mounting point for the door hinge assembly to prevent sagging or drooping
• Restores correct door alignment to improve sealing and reduce cold air loss
• Stops excess movement or rattling at the hinge area
• Helps eliminate door-binding or uneven gaps that keep the door from closing fully

• Unplug the appliance and remove food/items from the door before starting
• Support the door while removing/installing the bracket to avoid damage or injury
• Reuse or replace fasteners as required; tighten securely but avoid over-torquing
• After installation, check door alignment and gasket seal; make minor adjustments as needed

This retaining clip secures appliance panels and small components to keep parts aligned and prevent rattling. Durable and compact, it restores proper fit where clips have broken or worked loose. What it does

• Holds panels, trim pieces or small assemblies in place to prevent vibration and misalignment
• Stops rattling or rubbing caused by loose or missing fasteners
• Keeps wiring harnesses or small components seated
• Works as a direct replacement for a worn or broken clip shown in OEM parts diagrams

• Disconnect power before attempting any repair to avoid shock or injury
• Access may require removing trim or panels; keep fasteners organized for reassembly
• Install by pressing clip into the matching slot until it snaps; verify the secured part is seated
• If clip is damaged or the mating slot is deformed, replace both clip and any damaged mount for reliable fit