Wfe515soes Parts

The Door handle assembly is an OEM part for Whirlpool ranges. It is a component that includes both the door handle for convenient access, as well as the vent responsible for safely removing heat, smoke, and odors from the oven cavity.

Causes of a bad door handle and vent assembly can include wear from continuous use, heat exposure warping plastic components, or damage from impacts over time. Grease and food debris buildup can also deteriorate vent fan motors and air channels.

Symptoms of a bad assembly include:

• Difficulty opening or closing the oven door
• Excessive smoke or burned food smells
• The vent fan not operating or exhausting properly
• Internal components like springs or bearings becoming loose

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This door hinge supports and guides the appliance door so it opens and closes smoothly and stays aligned with the latch and gasket. Replacing a worn hinge restores proper fit and closing action to reduce rubbing and poor sealing.

• Provides the pivot point and supports the door's weight during operation
• Maintains alignment for an even gap and consistent seal
• Helps correct sagging, scraping, or a door that won't close flush
• Common signs of wear: bent/cracked hinge, squeaking or popping, misalignment

• Disconnect power before servicing and support the door to prevent strain or damage
• Remove mounting fasteners; transfer any reusable screws, spacers, or covers from the old hinge
• Install and snug fasteners, then check door alignment and closure; adjust as needed
• Open and close the door several times to verify smooth operation and recheck fasteners

The Cooktop is an OEM part for Whirlpool ranges. As the top cooking surface, it provides multiple burners, grates and surface elements to meet a variety of cooking needs. Cooktop features may include electric coils, gas burners, ceramic glass, and dual or quad burner configurations.

Causes of a bad cooktop can include cracked or damaged ceramic glass tops, failing electric coils that do not heat properly, or gas burners that will not light or maintain a consistent flame.

Symptoms of a cooktop issue include:

• Glass tops with visible cracks or chips
• Burners that intermittently light or go out
• Uneven or incomplete heating from electric coils
• Rust or corrosion on metal grates or burner bases

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Bisque

Door handle provides a secure grip for opening and closing the appliance door, restoring easy access and everyday use. A straightforward replacement to swap in when the original handle is cracked, loose, or broken. What it does:

• Restores a solid handhold so the door opens and closes reliably.
• Replaces cracked, broken or detached handles that make the door difficult or unsafe to use.
• Prevents accidental slips and helps maintain normal door operation.
• Matches the original mounting method to secure properly to the door.

• One door handle

• Disconnect power or unplug the appliance before beginning any service.
• Support the door while removing and installing the handle to avoid dropping or misaligning the door.
• Basic hand tools (screwdrivers, socket) are typically required; keep fasteners and trim organized.
• Do not overtighten screws — snug is sufficient.

This control panel is the user interface/console assembly that lets you select cycles and settings and shows status information. Replacing a damaged or unresponsive panel restores control and display functionality for normal operation. What it does:

• Houses the control buttons/touchpads and status display used to start and program the appliance
• Communicates user selections to the appliance control system so cycles run as chosen
• Replaces faded, cracked, or cosmetically damaged panels to improve appearance
• Fixes symptoms like unresponsive buttons, missing display indicators, or erratic user-interface behavior

• Disconnect power before starting any repair to avoid shock or damage
• Handle the display and lens carefully to avoid scratching or cracking
• Some disassembly of the top or console may be required; keep track of screws and fasteners

This anchor tip is a small snap-in retainer that secures spring or linkage components and helps keep moving parts aligned. It restores proper anchoring to reduce looseness, rubbing, and rattling for smoother operation. What it does:

• Secures a spring, clip or small linkage to its mounting point so parts stay in place
• Keeps moving components aligned to prevent binding or rubbing
• Helps eliminate rattles or noise caused by a dislodged retainer
• Provides a simple replacement for a damaged or worn plastic anchor

• Disconnect power to the appliance before starting any repair.
• Verify correct orientation and mounting location before snapping the anchor tip into place.
• Use needle-nose pliers for placement if needed; press gently until fully seated. Do not force or deform the part.
• If other components show wear or damage, inspect and replace as required for a complete repair.

This replacement control knob restores reliable operation for range and oven controls, letting you select heat and burner settings with a secure grip. Durable and easy to install, it replaces cracked, worn, or stripped knobs. What it does:

• Fits onto the control shaft to allow selection of temperature and burner settings.
• Restores positive engagement when an old knob spins, slips, or won't turn.
• Stops leaks of user input caused by stripped splines or damaged faces.
• Matches the OEM shape and function for a direct-fit replacement when the correct part number is used.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Most installs are tool-free: pull the old knob straight off and push the new knob onto the control shaft, aligning flats/splines.
• If the knob does not seat fully, verify orientation and spline match; do not force the part.
• After installation, restore power and test at a low setting to confirm proper operation.

This smooth glass cooktop is the top cooking surface for compatible electric ranges, restoring a flat, easy-to-clean work area and protecting internal burner components. It provides a like-for-like replacement for damaged, cracked, or heavily scratched tops. What it does:

• Replaces a cracked, chipped, or deeply scratched glass cooktop surface
• Restores a flat, heat-safe cooking area for proper cookware contact
• Protects internal elements and controls from spills and debris
• Improves the appliance's appearance and cleanability

• Disconnect power to the appliance before beginning repair to avoid shock
• Handle glass with care—use gloves and protect edges; glass can break under stress
• Installation may require removing grates, trim, and burner components; keep fasteners organized

The Wire Harness is an OEM component specifically designed for Whirlpool ranges. As the central electrical backbone, it powers and connects key modules like the control panel, oven lights, ignition system and gas valves.  

Causes of a faulty wire harness can include cracks or breaks in the insulation over time, limiting its ability to safely transmit electrical currents and gas lines.

Symptoms of a bad wire harness include:

• Lights or burners failing to ignite or heat as expected
• Control panel or knob failures such as unintended selections   
• The entire range ceasing functions or tripping safety devices

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range models.

This oven insulation retainer holds the insulation beneath the oven cavity to help maintain proper heat shielding and support. It replaces damaged or missing retainers to restore correct insulation positioning and reduce heat transfer to surrounding components. What it does:

• Secures oven cavity insulation in place so insulation can't shift or sag
• Helps maintain proper heat shielding around the oven cavity
• Commonly replaced when the retainer is cracked, broken, or missing

• Intended for use with the oven insulation area; fits your model before installing
• Turn off power to the appliance at the breaker before servicing to avoid shock hazard
• Handle gently to avoid damaging surrounding insulation; wear gloves and eye protection
• Use existing mounting hardware when possible; replace any stripped or damaged fasteners

This control bracket secures the appliance control or console assembly, keeping the control board and user interface stable for reliable operation. It helps prevent loose or misaligned controls that can affect button response or display visibility. What it does:

• Provides a rigid mounting surface for the control board or console assembly
• Keeps control components aligned and stable during normal use
• Helps reduce vibration-related connector or wire stress
• Can restore proper fit and button alignment when the panel is loose

• One control bracket

• Disconnect power to the appliance before starting any repair
• Handle the control board and wiring harness carefully to avoid damage
• Basic hand tools (screwdriver, nut driver) are typically required for removal/installation
• Reuse existing screws or verify hardware compatibility

The Cooktop Assembly is an OEM part for Whirlpool ranges. It is the complete glass surface that spans the cooking area, providing a smooth, seamless cooking zone. 

The cooktop assembly is responsible for housing the underlying heating elements and ensuring an even distribution of heat across the cooking surface. It allows for flexible cooking configurations with multiple burners or induction zones. 

Causes of a bad cooktop assembly can include cracks or chips in the glass, malfunctioning temperature sensors, or damaged heating elements. 

Symptoms of a bad cooktop assembly include:

• Burners or zones that do not heat properly 
• Uneven or inefficient heat transfer
• Cracks, chips, or scratches that compromise the seal

Color: White with black glass

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This drawer panel replaces a damaged or worn storage-drawer front to restore appearance and proper drawer function. It provides a clean, finished front that secures the drawer and hides the internal cavity. What it does:

• Replaces a cracked, dented, scratched, or broken drawer front for a neater appearance
• Restores proper alignment and secure closure of the storage drawer
• Covers and protects the drawer cavity and internal components from dust and debris
• Helps eliminate rattling or loose-feeling drawer operation caused by a damaged front

• One drawer panel

• Disconnect power to the appliance before beginning any service as a general safety precaution
• Remove the drawer per the appliance service instructions to access mounting clips or screws
• Handle replacement panel carefully to avoid scratching the finish during installation
• Use only the specified mounting clips/screws and replace any broken fasteners for a secure fit