Wfe525s0hw Parts

The INSULATION is an OEM component specifically designed for Whirlpool electric ranges. Positioned between inner and outer wall cavities, it efficiently buffers heat.

Fiberglass batting material keeps internal temperatures elevated for cooking while preventing harmful temperatures from spreading outside. Stable temperature control is essential for consistent results.   

Causes of damaged insulation could be high heat exposure over time weakening fibers, moisture ingress deteriorating integrity, or physical punctures allowing heat leakage.

Symptoms of insufficient insulation include: 

• Oven unable to effectively retain or distribute set temperatures
• Door and exterior surfaces becoming too warm to safely touch 
• Higher energy bills from frequent recovery heating cycles

This Whirlpool insulation is also compatible with electric ranges by GE, Frigidaire, Samsung, and some LG kitchen models.

This door hinge supports and guides the appliance door so it opens and closes smoothly and stays aligned with the latch and gasket. Replacing a worn hinge restores proper fit and closing action to reduce rubbing and poor sealing.

• Provides the pivot point and supports the door's weight during operation
• Maintains alignment for an even gap and consistent seal
• Helps correct sagging, scraping, or a door that won't close flush
• Common signs of wear: bent/cracked hinge, squeaking or popping, misalignment

• Disconnect power before servicing and support the door to prevent strain or damage
• Remove mounting fasteners; transfer any reusable screws, spacers, or covers from the old hinge
• Install and snug fasteners, then check door alignment and closure; adjust as needed
• Open and close the door several times to verify smooth operation and recheck fasteners

This anchor tip is a small snap-in retainer that secures spring or linkage components and helps keep moving parts aligned. It restores proper anchoring to reduce looseness, rubbing, and rattling for smoother operation. What it does:

• Secures a spring, clip or small linkage to its mounting point so parts stay in place
• Keeps moving components aligned to prevent binding or rubbing
• Helps eliminate rattles or noise caused by a dislodged retainer
• Provides a simple replacement for a damaged or worn plastic anchor

• Disconnect power to the appliance before starting any repair.
• Verify correct orientation and mounting location before snapping the anchor tip into place.
• Use needle-nose pliers for placement if needed; press gently until fully seated. Do not force or deform the part.
• If other components show wear or damage, inspect and replace as required for a complete repair.

This replacement control knob restores reliable operation for range and oven controls, letting you select heat and burner settings with a secure grip. Durable and easy to install, it replaces cracked, worn, or stripped knobs. What it does:

• Fits onto the control shaft to allow selection of temperature and burner settings.
• Restores positive engagement when an old knob spins, slips, or won't turn.
• Stops leaks of user input caused by stripped splines or damaged faces.
• Matches the OEM shape and function for a direct-fit replacement when the correct part number is used.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Most installs are tool-free: pull the old knob straight off and push the new knob onto the control shaft, aligning flats/splines.
• If the knob does not seat fully, verify orientation and spline match; do not force the part.
• After installation, restore power and test at a low setting to confirm proper operation.

This oven insulation retainer holds the insulation beneath the oven cavity to help maintain proper heat shielding and support. It replaces damaged or missing retainers to restore correct insulation positioning and reduce heat transfer to surrounding components. What it does:

• Secures oven cavity insulation in place so insulation can't shift or sag
• Helps maintain proper heat shielding around the oven cavity
• Commonly replaced when the retainer is cracked, broken, or missing

• Intended for use with the oven insulation area; fits your model before installing
• Turn off power to the appliance at the breaker before servicing to avoid shock hazard
• Handle gently to avoid damaging surrounding insulation; wear gloves and eye protection
• Use existing mounting hardware when possible; replace any stripped or damaged fasteners

This control bracket secures the appliance control or console assembly, keeping the control board and user interface stable for reliable operation. It helps prevent loose or misaligned controls that can affect button response or display visibility. What it does:

• Provides a rigid mounting surface for the control board or console assembly
• Keeps control components aligned and stable during normal use
• Helps reduce vibration-related connector or wire stress
• Can restore proper fit and button alignment when the panel is loose

• One control bracket

• Disconnect power to the appliance before starting any repair
• Handle the control board and wiring harness carefully to avoid damage
• Basic hand tools (screwdriver, nut driver) are typically required for removal/installation
• Reuse existing screws or verify hardware compatibility

This control knob lets you select heat settings and operate a range or stove control safely and easily. It replaces a cracked, worn or missing knob so you can turn burners or oven settings with a secure grip. What it does:

• Fits onto the range/stove control shaft to set burner or oven temperatures
• Restores a solid grip for smooth turning and precise selection of settings
• Common fix for a loose, stripped, cracked or missing control knob
• Helps eliminate slipping or difficulty changing settings

• Turn off power to the appliance before installing to avoid injury
• Align the knob splines with the control shaft and press straight on until fully seated
• Do not force—if it does not seat easily, verify spline orientation and shaft type
• If internal control or shaft is damaged, replace the underlying control assembly

This control panel is the appliance's user interface that houses the buttons and display, restoring normal control and access to settings for the unit. It replaces a damaged, worn, or unresponsive console assembly. What it does:

• Provides the front-facing buttons and display used to select cycles, options, and settings
• Restores responsive button operation and visible status/readout when the original panel is cracked, faded, or unresponsive
• Can resolve intermittent or erratic control behavior caused by a damaged console assembly
• Re-establishes normal user control when controls fail to register presses or the display is unreadable

• One control panel assembly

• Disconnect power to the appliance before beginning any work to avoid shock or damage
• Remove any trim or bezels carefully to access the console; keep fasteners and small parts organized
• Handle the panel and attached wiring gently; align and fully seat connectors during reassembly
• Test function after reconnecting power and before replacing trim or finishing the repair

The Main Wire Harness is an OEM part for Whirlpool ranges. It serves as the primary electrical distribution system, delivering power to key components throughout the range including surface elements, oven lights and fans, controls, and timer systems.

Causes can be repetitive flexing and jostling from daily use leading to wire fatigue or breaks in insulation. Over time, high heat and chemical exposure can also damage wiring and connectors.

Symptoms of a bad main wire harness include:

• Surface or oven elements not working or heating unevenly
• Lights, fans, or controls becoming unresponsive
• Circuit breakers tripping or blowing fuses frequently
• Electrical burning smells emerging from internal areas

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.