Wfe550sohz1 Parts

A Torx screw replacement used to secure appliance panels and components for stable operation. Designed as a direct-fit fastener to replace stripped or missing screws so panels and assemblies stay properly attached. What it does:

• Replaces damaged, stripped, or missing Torx-head screws that hold appliance parts together
• Restores secure fastening for control panels, trim pieces, brackets, and access covers
• Helps eliminate rattles, loose panels, or gaps caused by missing hardware

• One Torx screw

• Disconnect power and follow appliance safety procedures before servicing
• Use the correct Torx driver bit size to avoid cam-out or head damage
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Swap all like screws to ensure uniform fit and torque

A small hex nut used to secure appliance components and fasten threaded studs or bolts. This durable replacement restores proper fastening to stop loose panels, clips or moving parts from vibrating or coming apart. What it does:

• Secures threaded studs, bolts or hardware to keep panels and assemblies in place
• Prevents vibration-caused loosening or rattling during operation
• Restores proper attachment where a missing or stripped nut causes instability
• Simple mechanical fastening—no electrical or electronic function

• One replacement hex nut (quantity: 1)

• Disconnect power and gas before accessing internal components
• Match thread size and fit before installation; use correct mating stud or bolt
• Start threads by hand to avoid cross-threading, then tighten with an appropriate wrench
• Inspect surrounding hardware for wear and replace any damaged fasteners or studs

This upper electrical cover protects and conceals the appliance's control box and wiring, helping keep electrical components safe from dust and accidental contact. It restores a finished appearance and supports secure mounting of the console area. What it does:

• Covers and shields the control box and wiring from dust, debris and accidental contact.
• Helps keep electrical connections secure by providing a proper mounting surface for the console.
• Restores the appliance's exterior appearance when the original cover is cracked, warped or missing.
• Reducing exposed components can help avoid nuisance issues like loose connectors or intermittent controls.

• Disconnect power (unplug or shut off the breaker) before starting any work.
• Handle panels carefully — metal edges can be sharp; wear gloves if needed.
• Keep original screws/fasteners or replace with equivalent OEM screws; verify alignment before tightening.

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so panels and parts stay aligned and stable during normal use. What it does:

• Fastens appliance panels, trim or internal components in place
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop panel vibration and maintain proper component alignment
• Matches OEM fit where specified for a secure installation

• One replacement mounting screw

• Verify screw size and fit before installation; use the correct screw location from your parts diagram
• Turn off and disconnect power to the appliance before accessing internal components
• Hand-start the screw to avoid cross-threading; tighten until snug—do not over-tighten
• Wear safety glasses and follow manufacturer service instructions when applicable

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

This wire harness connects key electrical components to restore reliable power and signal paths in the appliance. Use it to replace a damaged or frayed harness and help resolve control or power failures. What it does

• Carries power and signals between control boards, switches and motors to enable normal operation.
• Common symptoms that indicate a bad harness: appliance won't start, intermittent or no power to components, or controls unresponsive.
• Replaces damaged, corroded or broken wiring and connectors that can cause shorts or open circuits.
• Restores proper connector fit and routing to reduce arcing and intermittent faults.

• One replacement wire harness

• Disconnect power (unplug or shut off circuit breaker) before servicing to avoid shock or damage.
• Verify the harness routing and connector orientation before unplugging components; take photos if needed.
• Seat all connectors fully and secure any retaining clips or cable ties to prevent pinching or chafing.

This replacement door glass is the clear window panel in the appliance's door. It restores a clear view and the door's protective barrier when the original glass is cracked, shattered, or hazed.

• Forms the transparent viewing window within the door assembly
• Supports proper door integrity and sealing when installed with existing trim/gaskets
• Replaces cracked, shattered, or scratched glass to remove sharp edges and restore appearance
• Common symptoms: spiderweb cracks, complete shatter, clouding/fogging, or a loose/rattling panel

• Disconnect power before servicing; allow it to cool completely
• Wear cut-resistant gloves and eye protection; handle glass carefully on a padded work surface
• Remove the door and separate panels; note screw locations and orientation
• Transfer any brackets, trim, or seals from the old glass and tighten fasteners evenly without over-torquing

The Door handle assembly is an OEM part for Whirlpool ranges. It is a component that includes both the door handle for convenient access, as well as the vent responsible for safely removing heat, smoke, and odors from the oven cavity.

Causes of a bad door handle and vent assembly can include wear from continuous use, heat exposure warping plastic components, or damage from impacts over time. Grease and food debris buildup can also deteriorate vent fan motors and air channels.

Symptoms of a bad assembly include:

• Difficulty opening or closing the oven door
• Excessive smoke or burned food smells
• The vent fan not operating or exhausting properly
• Internal components like springs or bearings becoming loose

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This door hinge supports and guides the appliance door so it opens and closes smoothly and stays aligned with the latch and gasket. Replacing a worn hinge restores proper fit and closing action to reduce rubbing and poor sealing.

• Provides the pivot point and supports the door's weight during operation
• Maintains alignment for an even gap and consistent seal
• Helps correct sagging, scraping, or a door that won't close flush
• Common signs of wear: bent/cracked hinge, squeaking or popping, misalignment

• Disconnect power before servicing and support the door to prevent strain or damage
• Remove mounting fasteners; transfer any reusable screws, spacers, or covers from the old hinge
• Install and snug fasteners, then check door alignment and closure; adjust as needed
• Open and close the door several times to verify smooth operation and recheck fasteners

Replacement convection fan motor assembly that circulates hot air for more even baking and roasting. Restores convection operation when the oven fan is worn, makes noise, or stops running, helping return consistent cooking results.

• Circulates heated air throughout the oven cavity to promote even baking and roasting; replaces a failed convection fan motor.
• Resolves symptoms such as uneven baking, longer-than-normal cook times, loud grinding or rattling noises, or a fan that will not run.
• Re-establishes proper airflow for convection cooking and helps maintain more consistent oven temperatures.

• Disconnect power at the breaker or unplug the appliance before beginning work.
• Allow the oven to cool completely and wear gloves to protect against sharp sheet-metal edges.
• Follow the oven's service manual for wiring and mounting instructions.

The Glass Oven Door is an OEM component specifically designed for Whirlpool ranges. Found at the front of the range cavity, the oven door has an interior glass pane that allows for viewing of baked goods without opening the door.  

Crafted from a durable metal frame with a heat-resistant glass inset under a protective outer coating, the oven door features a hinge and dual-bolt closing system. This allows for secure opening and closing to safely check on or remove food without losing heat.

Symptoms of a bad oven door include: 

• Broken, cracked, or cloudy glass that obstructs visibility
• Warped or misaligned door that won’t seal or latch fully
• Gaps that cause lost heat and inefficient baking  

Compatible with KitchenAid, Jenn-Air, and select GE gas and electric models.

The Insulation is an OEM part compatible with Whirlpool ranges. It is made of thick fiberglass material installed behind oven and broiler walls. The insulation works to contain heat within the oven cavity and prevent it from transferring to external surfaces, keeping panels cool for safety. 

Symptoms of damaged insulation include:

• Outer range surfaces getting excessively hot during baking  
• Inefficient or improper heating of oven or broiler elements
• Potential energy efficiency and component longevity issues

Causes of damage can be deterioration of the fiberglass over time, punctures or compressing of material from cleaning or repairs.  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This anchor tip is a small snap-in retainer that secures spring or linkage components and helps keep moving parts aligned. It restores proper anchoring to reduce looseness, rubbing, and rattling for smoother operation. What it does:

• Secures a spring, clip or small linkage to its mounting point so parts stay in place
• Keeps moving components aligned to prevent binding or rubbing
• Helps eliminate rattles or noise caused by a dislodged retainer
• Provides a simple replacement for a damaged or worn plastic anchor

• Disconnect power to the appliance before starting any repair.
• Verify correct orientation and mounting location before snapping the anchor tip into place.
• Use needle-nose pliers for placement if needed; press gently until fully seated. Do not force or deform the part.
• If other components show wear or damage, inspect and replace as required for a complete repair.