Wfe775hohz Parts

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

A replacement wire insulation sleeve that protects appliance wiring from heat, abrasion and vibration to help maintain safe electrical connections. Installs quickly to restore proper insulation on exposed or damaged wiring. What it does:

• Shields wiring from heat and rubbing that can wear or melt insulation
• Helps prevent electrical shorts and intermittent power caused by chafed wires
• Holds wiring away from sharp edges and moving parts
• Used where original insulation has cracked, split or burned

• One wire insulation sleeve

• Disconnect power to the appliance before starting any work
• Slide sleeve over the wire and position to fully cover the exposed area; secure per OEM routing and retainers
• Inspect nearby wiring and components for heat or abrasion damage and replace if needed

This support bracket secures internal components to the appliance chassis, restoring proper alignment and stability for attached parts. It's a simple replacement that helps stop rattling and prevents components from shifting during use. What it does:

• Provides a secure mounting point to hold panels, assemblies or components in place
• Helps eliminate vibration or rattling caused by a loose or broken bracket
• Restores proper alignment so connected parts operate correctly
• Prevents further wear or damage from loose components

• Disconnect power to the appliance before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required
• Keep original fasteners and note their location for reassembly; replace damaged hardware as needed

This upper electrical cover protects and conceals the appliance's control box and wiring, helping keep electrical components safe from dust and accidental contact. It restores a finished appearance and supports secure mounting of the console area. What it does:

• Covers and shields the control box and wiring from dust, debris and accidental contact.
• Helps keep electrical connections secure by providing a proper mounting surface for the console.
• Restores the appliance's exterior appearance when the original cover is cracked, warped or missing.
• Reducing exposed components can help avoid nuisance issues like loose connectors or intermittent controls.

• Disconnect power (unplug or shut off the breaker) before starting any work.
• Handle panels carefully — metal edges can be sharp; wear gloves if needed.
• Keep original screws/fasteners or replace with equivalent OEM screws; verify alignment before tightening.

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so panels and parts stay aligned and stable during normal use. What it does:

• Fastens appliance panels, trim or internal components in place
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop panel vibration and maintain proper component alignment
• Matches OEM fit where specified for a secure installation

• One replacement mounting screw

• Verify screw size and fit before installation; use the correct screw location from your parts diagram
• Turn off and disconnect power to the appliance before accessing internal components
• Hand-start the screw to avoid cross-threading; tighten until snug—do not over-tighten
• Wear safety glasses and follow manufacturer service instructions when applicable

This door liner is the oven's inner door panel that helps protect the door cavity and support the inner glass. Replaces a damaged or worn liner to restore a clean interior surface and proper glass fit. What it does:

• Replaces the oven's inner door panel that secures the inner glass and insulation
• Restores a sealed, smooth interior door surface to help contain heat and cooking messes
• Helps eliminate rattles or misalignment caused by a cracked or bent liner
• Compatible with ovens that specify part number W10902192

• One inner oven door liner

• Refer to the oven model's service manual for step-by-step disassembly and reassembly
• Disconnect power (and gas if applicable) before starting work
• Handle the glass and liner carefully—wear gloves and eye protection to avoid cuts
• If other door components are damaged, inspect and replace them as needed for a complete repair

This door handle is a direct-replacement trim piece that restores a secure grip and normal door operation. It helps maintain proper opening and closing while covering the door edge for a finished look. What it does:

• Replaces a worn, cracked or broken door handle to restore safe, reliable gripping and use
• Helps stop the door from feeling loose, wobbly or difficult to open
• Restores the door's finished appearance when the original handle is damaged or cosmetically worn
• Matches OEM fit and mounting points to align with existing screw bosses and trim

• One door handle

• Disconnect power to the appliance before starting repair; for refrigerators, remove food and secure doors as needed
• Use basic hand tools (screwdriver or nut driver) to remove fasteners and transfer any mounting brackets or trim pieces
• Align handle, install fasteners snugly but do not overtighten to avoid cracking the part
• Replace missing or damaged screws or brackets with OEM-recommended hardware for best fit

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

The Wire Harness is an OEM component for Whirlpool ranges. As the conductor of electrical signals, it activates critical heating and control systems for safe, convenient cooking. 

Precision cabling routes low-voltage AC power and communication pathways between interior control boards and exterior terminals. Protective sheathing stands up to ambient heat and abrasion inside appliance cavities.

Causes of damage include loose wiring contacting sharp edges over time, causing shorts. Safety is crucial in appliance design. 

Symptoms of a bad wire harness include:

• Range functions activating unexpectedly 
• Power surges tripping circuit breakers
• Frayed or worn wires exposed inside the range
• Inconsistent or failing responses from controls

Replace yours today with this genuine Whirlpool harness to restore safe, flawless transmission of control signals. Compatible with Kenmore, Jenn-Air, and KitchenAid models as well. 

This glass spacer positions and cushions oven door glass to keep panels aligned and prevent direct glass-to-glass contact. Replacing a damaged spacer restores proper door fit and reduces rattling or uneven sealing. What it does

• Separates and spaces oven door glass panels to prevent rubbing and stress cracks.
• Cushions the glass to reduce vibration and noise during operation.
• Helps maintain even door alignment for a tighter closure and consistent heat containment.
• Commonly replaced when the spacer is worn, cracked, missing, or allowing glass to contact adjacent parts.

• One glass spacer

• Disconnect power to the appliance before starting any repair.
• Handle glass and the spacer with care; wear safety gloves and eye protection.
• Removal/installation typically requires partial door disassembly—retain fasteners and note orientation.
• If door glass is cracked or loose, replace damaged glass to avoid injury.

The Control-Electric is an OEM part for Whirlpool electric ranges. As the central processing unit, it regulates vital cooking functions such as oven temperatures, cooking modes, timers, and other digitally controlled settings. 

Causes of a bad control-electric can include failure of electronic boards over time, water damage, power surges, or fluctuations in the power supply that interfere with operations.

Symptoms of a bad control-electric include:

• Issues with selecting or changing oven functions
• Failure to accurately control and maintain set temperatures  
• Timers and clocks not working properly
• Unexpected appliance behavior such as failure to turn off after cooking

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, and select Kenmore electric ranges.

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This anchor tip is a small snap-in retainer that secures spring or linkage components and helps keep moving parts aligned. It restores proper anchoring to reduce looseness, rubbing, and rattling for smoother operation. What it does:

• Secures a spring, clip or small linkage to its mounting point so parts stay in place
• Keeps moving components aligned to prevent binding or rubbing
• Helps eliminate rattles or noise caused by a dislodged retainer
• Provides a simple replacement for a damaged or worn plastic anchor

• Disconnect power to the appliance before starting any repair.
• Verify correct orientation and mounting location before snapping the anchor tip into place.
• Use needle-nose pliers for placement if needed; press gently until fully seated. Do not force or deform the part.
• If other components show wear or damage, inspect and replace as required for a complete repair.

This control bracket secures the appliance control or console assembly, keeping the control board and user interface stable for reliable operation. It helps prevent loose or misaligned controls that can affect button response or display visibility. What it does:

• Provides a rigid mounting surface for the control board or console assembly
• Keeps control components aligned and stable during normal use
• Helps reduce vibration-related connector or wire stress
• Can restore proper fit and button alignment when the panel is loose

• One control bracket

• Disconnect power to the appliance before starting any repair
• Handle the control board and wiring harness carefully to avoid damage
• Basic hand tools (screwdriver, nut driver) are typically required for removal/installation
• Reuse existing screws or verify hardware compatibility

This trim vent is the molded outlet trim that finishes the cabinet opening and helps direct cold air from the refrigerator/freezer where needed. It restores a clean appearance and proper airflow at the vent opening. What it does:

• Covers and finishes the vent opening at the cabinet for a factory look
• Directs airflow from the evaporator area into the fresh-food or freezer compartment
• Replaces cracked, broken, or warped vent trim that lets cold air escape or looks damaged
• Helps prevent large debris from entering the vent opening

• Disconnect power to the appliance before beginning any work.
• Typically a snap-in or screw-retained replacement; remove any retainers and pull the old trim straight out.
• Align the new trim and press or fasten until it seats securely; do not force or bend the piece.
• If screws or clips are reused, ensure they are in good condition and tightened securely.

This bezel knob is the control-panel knob that lets you select settings and operate your appliance's controls with a finished, durable interface. It restores a secure grip and clear tactile feedback on the control shaft. What it does:

• Replaces a cracked, faded, or worn control knob to restore normal control operation
• Provides a finished bezel around the control shaft for a clean appearance
• Improves grip and makes setting selections easier and more reliable
• Helps stop slipping or loose rotation caused by a damaged knob

• Disconnect power to the appliance before attempting any service.
• Remove any trim or housing required to access the control knob; reinstall in reverse order.
• Press the knob onto the control shaft until fully seated; verify secure fit before use.
• If a retaining clip or screw is present, retain and re-use per the original configuration.