Wfg515soeso Parts

The Burner Valve (RR) is an OEM part for Whirlpool ranges. It controls the flow of gas to the rear-right burner, allowing for precise regulation of the flame during cooking. The valve ensures safe and efficient operation by opening and closing as needed to adjust the burner’s heat output.

Over time, burner valves can become faulty due to wear and tear, grease buildup, or internal damage. Exposure to high heat and repeated use may cause the valve to stick, leak, or fail to regulate gas properly. If the valve becomes obstructed or worn out, it can compromise cooking performance and safety.

Symptoms of a bad burner valve include:

• Inconsistent or weak flame
• Gas smell near the burner when turned off
• Difficulty igniting the burner
• The burner not shutting off completely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wiring harness connects appliance controls and components to supply power and signals, restoring reliable electrical paths for normal operation. Designed to replace a damaged or worn harness to help resolve intermittent power or control failures. What it does:

• Routes power and signal connections between the control board and key components
• Replaces cracked, frayed, or corroded wires that cause intermittent operation or no power to parts
• Helps stop shorts or blown fuses caused by damaged wiring
• Restores factory wiring layout for correct component communication

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Verify connector orientations and secure all crimps or terminals; ensure proper strain relief
• Check for pin corrosion or bent terminals and replace harness if connectors are damaged

The Drawer Panel is an OEM part for Whirlpool ranges. It is responsible for providing a sleek and finished look to the front of the range drawer, enhancing the overall aesthetic appeal of your kitchen.

A bad drawer panel can occur due to accidental damage, wear and tear, or improper handling. If you notice symptoms such as cracks, dents, or discoloration on the front panel, it may be time to replace it.

Symptoms of a bad drawer front panel include:

• Cracks, dents, or scratches on the front panel
• Discoloration or fading of the panel
• Loose or misaligned fit

Restore your range by replacing the damaged or worn-out drawer front panel with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Black.

This rail base provides the structural support for the refrigerator drawer/rail assembly, restoring smooth drawer alignment and preventing sagging or binding. It's a direct-fit replacement that helps maintain proper drawer operation and cabinet fit. What it does:

• Supports and aligns the drawer/rail assembly so drawers slide smoothly
• Secures the lower rail to the cabinet to prevent shifting or sagging
• Restores proper drawer clearance and prevents sticking or uneven movement
• Addresses symptoms like crooked or loose drawers, binding, or gaps at the drawer edge

• One rail base

• Disconnect power to the appliance before beginning work
• Remove drawer(s) and any trim panels to access the rail area
• Use basic hand tools; avoid overtightening fasteners to prevent damage

This drawer glide replaces a worn or broken slide to help a drawer open and close smoothly and stay aligned. It restores proper drawer movement and reduces sticking, rattling, or binding during use. What it does:

• Guides and supports the drawer as it slides in and out
• Restores smooth travel and proper alignment for heavy or front-loaded drawers
• Reduces noise from loose or damaged sliding hardware
• Helps prevent the drawer from falling out or binding when fully extended

• Disconnect power and remove contents from the drawer before starting
• Remove the drawer and existing glide hardware to inspect mounting points
• Align the replacement glide, secure with existing or OEM screws, and test smooth operation
• Wear gloves and follow basic safety practices;

This is a genuine replacement screw used to secure appliance components. It provides a simple, reliable fastener for reattaching panels, brackets, or assemblies so parts stay properly mounted and stable during operation. What it does

• Secures panels, trim, brackets or small assemblies in place
• Restores proper fastening where a missing or damaged screw causes loose parts or rattling
• Prevents movement that can lead to noise or misalignment of adjacent components
• Used wherever the original screw was removed or lost during repairs

• One replacement screw

• Use the matching screw head and thread engagement; do not force if it does not seat smoothly
• Tighten until snug—avoid overtightening to prevent stripping or cracking plastic parts
• Disconnect power before working on electrical appliances and follow basic safety precautions
• If original screw was rusted, check mating threads for damage before installing new fastener

This rod-style door switch actuator moves the door-mounted switch striker to signal open/closed door positions, restoring proper door-sensing and interior light functions. It's a small replacement part that helps the appliance detect door position reliably. What it does:

• Engages the door switch when the door closes so the appliance recognizes a closed door
• Allows the interior light to turn on/off based on door position
• Prevents intermittent door-open errors and related operation interruptions
• Works with the door latch/switch assembly to ensure consistent door sensing

• Disconnect power before starting any repair to avoid shock or injury
• Access may require removing the door trim or inner panel—keep fasteners organized
• Align the rod with the switch actuator and door bracket; verify smooth movement before reassembly

This replacement refrigerator door handle restores a secure grip and normal door operation after a worn, cracked, or broken handle. Durable, service-ready design helps keep the door easy to open and close. What it does:

• Replaces a damaged or broken refrigerator door handle so the door can be opened and closed safely
• Provides a solid gripping surface for everyday use
• Helps prevent further cabinet or door edge damage caused by makeshift grips
• Common symptom: handle cracked, loose, or separated from the door

• Use the model's service manual for correct fastener locations and procedures
• Typically installs with screws or clips; have basic hand tools ready
• Avoid overtightening fasteners to prevent damage to the handle or door
• If the door has electrical components (ice/water dispensers), unplug the appliance before starting work

This replacement screw secures appliance panels and components to keep parts aligned and stable. Use it to replace missing or damaged fasteners that cause loose trim, rattling, or unsecured panels for safer, quieter operation. What it does:

• Fastens panels, brackets, trim pieces, or small components in place
• Restores proper alignment and stops vibration or rattling caused by loose hardware
• Replaces stripped, corroded, or missing screws to prevent parts from shifting or falling
• Compatible where the OEM lists part W11244557 as the required fastener

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening, which can strip threads or crack parts
• Replace like-for-like; length before installing

This burner valve controls gas flow to a single cooktop burner so the burner lights and adjusts smoothly. It replaces a worn or faulty valve to restore proper flame control and consistent cooking heat. What it does:

• Regulates gas flow to a cooktop burner for ignition and flame adjustment
• Helps correct symptoms like a burner that won't light, has weak or uneven flame, or will not maintain ignition
• Works as the valve component in the range's gas delivery system for one burner

• Turn off gas supply and electrical power before starting work
• Follow appliance wiring and gas connections exactly; use a fuel-rated thread sealant where required
• Verify correct fit and orientation against the existing valve before final assembly
• After installation, check all gas connections for leaks and test burner operation

This orifice controls the gas flow to a single burner, helping the appliance produce a stable, correct flame for cooking. Replace a worn or clogged orifice to restore consistent burner performance and safer operation. What it does:

• Regulates gas flow to the burner for proper flame size and heat output
• Helps maintain an even, steady flame for reliable cooking
• A clogged or damaged orifice can cause a weak, uneven, or yellow flame
• Resolve issues where a burner is slow to light or does not reach normal heat

• Turn off the gas supply and unplug the appliance before starting work
• Remove burner parts and orifice holder to access the orifice; use appropriate hand tools
• Replace with the identical orifice and proper seating and orientation
• After installation, check for gas leaks and proper burner flame

This burner valve controls gas flow to a surface burner on compatible gas ranges, restoring proper ignition and flame control for safe cooking. It replaces a worn or leaking valve to help re-establish normal burner operation. What it does

• Regulates gas supply to a single surface burner so the burner lights and maintains a steady flame
• Commonly replaced when a burner won't light, has weak or no flame, or the knob does not control flame level
• Stops or reduces unintended gas flow when valve seals fail, helping prevent leaks
• Interfaces with the range's control knob and internal gas line to modulate heat output

• One burner valve

• Turn off the gas supply and unplug the appliance before starting work
• Follow OEM disassembly steps for safe access; handle gas fittings carefully to avoid damage
• After installation, check all connections for leaks with a soap solution or approved leak detector

This broiler burner provides the gas flame for the oven's broil function, restoring high-heat cooking performance for searing and browning. Designed for direct-spark-ignition (DSI) ranges, it replaces a worn or damaged broil element. What it does:

• Produces the high, direct flame used for broiling food on the oven's top rack
• Replaces a cracked, rusted, or clogged burner that causes uneven or weak broiling
• Stops burner-related ignition issues when the burner tube or ports are damaged
• Helps restore proper heat distribution for faster browning and searing

• One broiler burner

• Disconnect electrical power and shut off the gas supply before starting work
• Handle gas connections and igniter areas carefully; inspect for leaks after installation
• Use basic hand tools; ensure the burner seats and aligns with the gas orifice and igniter

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.