Wfg520soas2 Parts

This control panel is the front fascia that houses the cycle buttons and indicators on your appliance. Replacing a damaged or unresponsive panel restores reliable selections and a clean, factory appearance.

• Provides the user interface for selecting cycles and options
• Communicates button presses to the control system to start and customize operation
• Covers and protects components while finishing the appliance's front
• Common symptoms: cracked/broken console, worn or sticky buttons, selections not registering, intermittent response

• Disconnect power at the breaker before servicing
• Remove mounting screws/clips to release the existing console; support it to avoid straining wiring
• Transfer the user interface module and any brackets from the old panel as needed; avoid pinching ribbon cables
• Reinstall hardware and verify button response before completing reassembly

This flame spreader directs and evens the oven burner flame for more uniform heating and improved bake results. Replacement spreaders restore proper flame pattern and help reduce hot spots in the oven cavity. What it does:

• Distributes burner flame across the oven surface to promote even cooking and baking.
• Helps prevent concentrated hot spots that can cause unevenly cooked food.
• Can restore correct flame pattern when the existing baffle is warped, damaged, or missing.
• Supports stable burner operation by shielding and guiding the flame.

• Turn off power to the range and shut off the gas supply before servicing.
• Handle carefully to avoid bending or damaging the baffle; reinstall in the original orientation.
• Use appropriate hand tools and follow the oven's service manual for removal/installation steps.
• After installation, restore gas and power and check burner ignition and for any gas leaks per safety procedures.

This drawer panel replaces a damaged or worn front panel on compatible Whirlpool refrigerator drawers to restore appearance and proper closure. It provides a like-for-like cosmetic and structural replacement for cracked, dented, or broken drawer fronts. What it does:

• Replaces a cracked, dented or broken drawer front to restore a clean appearance
• Helps the drawer seal and slide properly by restoring the front face and mounting surface
• Eliminates sharp edges and cosmetic damage that can catch on clothing or food packaging
• Matches the OEM shape so factory hardware and trim align correctly

• One replacement drawer panel

• Remove drawer and contents before starting; handle panel carefully to avoid damage
• Use original mounting screws and hardware; confirm any trim or clips are present before final assembly
• Wear gloves to protect hands from sharp edges and to avoid fingerprints on finished surfaces

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

Color: White  Note: Right side endcap

This control panel is the appliance's main electronic user interface, restoring access to cycle selection, settings, and status feedback so you can operate the unit normally. It replaces a cracked, unresponsive, or malfunctioning front control assembly. What it does:

• Provides the touchpad/buttons and display for selecting cycles and options
• Sends user commands to the appliance's main control for operation
• Common symptoms it resolves: unresponsive or stuck buttons, blank or unreadable display, incorrect or missing control feedback
• Restores normal user interaction when the front control has cosmetic damage or intermittent function

• Disconnect power to the appliance before starting any repair
• Handle the panel gently to avoid damaging the display, ribbon cable, or connectors
• Installation typically requires removing the front fascia or door trim; keep track of screws and clips

An orifice holder assembly that secures the gas orifice for proper burner operation, guiding fuel to the burner for stable ignition and flame control. Replaces a worn or damaged holder to restore correct gas flow alignment and safe burner performance. What it does:

• Holds the gas orifice in the correct position so the burner receives fuel at the proper outlet
• Helps ensure consistent ignition and a steady flame; can address intermittent lighting or weak flames
• Restores proper alignment after damage or corrosion to the original holder
• Used on gas ranges/ovens where the orifice mounts into a removable holder

• One orifice holder assembly

• Turn off the gas supply and electrical power before attempting service
• Inspect surrounding gaskets and fittings; replace any damaged seals for a safe gas connection
• Hand-tighten per OEM guidance; avoid over-tightening which can damage the holder or orifice

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: White  Note: Left side endcap

This replacement drawer panel restores the finished front of your appliance drawer so it looks and functions like new. It replaces a cracked, dented, or scratched front and helps the drawer seal and slide properly. What it does:

• Replaces a damaged or cosmetically worn drawer front to restore appearance
• Provides a proper mounting surface so the drawer closes and opens smoothly
• Helps maintain drawer alignment and fit against surrounding trim
• Matches original fit and attachment points for an easy swap when hardware is transferred

• Disconnect power or follow the appliance safety shutoff procedure before starting
• Remove the drawer and transfer any original mounting clips, brackets, or screws to the new panel
• Handle edges carefully to avoid damage; use appropriate tools and support the drawer during reassembly
• Refer to your model's service instructions for exact disassembly and reassembly steps

This control panel is the user-facing console that houses the oven/surface controls and display, restoring clear button response and readable display for safe, reliable operation. It replaces a cracked, worn, or nonresponsive console. What it does:

• Holds the touchpads/buttons and display that let you select bake, broil, temps and timers.
• Sends user commands to the oven's control board so functions start and stop as intended.
• Commonly fixes symptoms like unresponsive buttons, faded or cracked overlays, and erratic or blank displays.
• Restores a clean, readable surface for accurate temperature and timer input.

• One control panel (console assembly).

• Disconnect power at the breaker before starting any work to avoid shock.
• Handle the panel and display carefully to avoid scratching or cracking the overlay.
• Some installations require access behind the range or removing trim; keep hardware organized for reassembly.

This is a replacement fitting used to connect and secure a flexible hose or water line to the appliance, restoring a proper sealed connection and helping stop leaks at the joint. What it does:

• Provides a secure connection point for a flexible hose or water line
• Restores a sealed joint to prevent drips or slow leaks at the connection
• Helps maintain proper water flow to components that rely on a direct hose feed
• Replaces damaged, cracked or worn fittings that cause poor seals

• Shut off water supply and unplug the appliance before servicing
• Inspect mating hose and clamp for damage; replace clamp or hose if needed for a reliable seal
• Hand-start threads or push-fit connections to avoid cross-threading; tighten per OEM guidance

This cable clamp secures a wiring harness to the appliance frame to prevent chafing and strain on electrical connections. It helps keep wires routed neatly and reduces the risk of abrasion-related faults. What it does:

• Holds wiring harnesses in place to prevent rubbing against sharp edges or moving parts
• Reduces strain on terminal connections and wire leads
• Helps prevent intermittent electrical problems caused by loose or misrouted wires
• Keeps routing tidy for safer, cleaner internal layouts

• One cable clamp

• Disconnect power to the appliance before beginning any repair
• Replace with the same clamp type and orientation as the original; secure without over-tightening
• Route wires so insulation is not pinched; verify clearance from moving parts
• If you see damaged insulation or frayed wires, repair those issues before reassembly