Wfg540h0es Parts

Color: Black   Note: Left side endcap

Color: Black   Note: Right side endcap

This wire harness connects the igniter/spark switch to the range's ignition system, restoring reliable spark transmission for gas burner ignition. It helps re-establish spark signals when the original harness is damaged or corroded. What it does:

• Routes electrical connections between the spark/igniter switch and the ignition module
• Enables consistent sparking at burner igniters for reliable ignition
• Common fix when burners won't ignite or sparking is intermittent
• Replaces frayed, burned, or loose wiring that can interrupt spark signals

• Disconnect power and shut off gas supply before starting any repair
• Inspect harness routing and connector seating; replace any damaged clips or retainers

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Orifice Holder is an OEM part for Whirlpool gas ranges. It is a small but critical component responsible for securely holding the burner orifices in place on the stovetop. The orifice holder positions each burner orifice to ensure proper gas flow and optimum flame size during operation. 

Causes of a bad orifice holder can include damage or wear over time due to heat exposure on the stovetop. The holder material degrading could allow orifices to shift position. 

Symptoms of a bad orifice holder include:

• Improper or inconsistent burner flame size 
• Difficulty achieving or maintaining desired flame height
• Gas smell or leaks around burner area
• Burners that do not light or ignite as expected

This OEM replacement is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas range models. 

The Surface Burner Knob is an OEM part for Whirlpool gas ranges. This knob attaches to the control valve shaft, providing precise adjustment for the gas flow to the burner. Turning the knob allows users to regulate heat levels for different cooking needs, whether simmering gently or achieving a high boil.

Color: Black

Causes for a defective surface burner knob include wear from regular use, exposure to high heat or grease, accidental impact resulting in cracks or breakage, and internal stripping that prevents a secure grip on the control shaft.

Common symptoms of a defective surface burner knob include:

• Difficulty turning the burner on or off
• Inaccurate heat adjustment
• Cracks, looseness, or missing pieces

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges.

This 8-32 x 1.375 in SEMS machine screw secures appliance panels and internal components using a captive washer for reliable holding. It's a direct-fit fastener commonly used where a built-in washer prevents loosening and loss. What it does

• Fastens and secures panels, brackets, and assemblies in appliances
• Captive washer provides consistent clamping and resists loosening
• Replaces missing or stripped screws that cause rattling or loose parts
• Fits 8-32 threaded holes where a 1.375 in length is required

• Disconnect power and unplug the appliance before servicing
• Use the correct size driver to avoid cam-out or head damage
• Tighten until snug—do not overtighten to prevent thread or part damage
• Replace only with the same thread size and length to ensure proper fit

This replacement Holder ORF is the OEM retainer used to secure a small appliance component in place, restoring proper fit and preventing loose or misaligned parts. It's a direct-fit replacement designed for easy swap-out. What it does:

• Secures and holds a related appliance component in its mounting position
• Prevents rattling, shifting, or detachment caused by a broken or missing holder
• Helps restore proper alignment and reliable operation of the secured part
• Small, often plastic/metal retainer used in trim, dispenser, or door assemblies

• One Holder ORF

• Disconnect power or unplug the appliance before starting any repair
• Inspect surrounding clips, screws, and mounting points for damage before installation
• Use basic hand tools; avoid forcing parts—ensure the holder seats fully in its mounting slot

The Insulation is an OEM part for Whirlpool ranges. It serves as the heat-resistant fiberglass insulation installed inside oven cavity walls and behind backsplash panels. 

Symptoms of damaged or degraded insulation could include:

• Uneven or inefficient heat distribution inside the oven 
• Hot and cold spots developing on bake elements over time
• Longer preheat periods are needed to reach target temperatures
• Higher energy costs from overworked heating components  

Causes may involve breaks in insulation fibers from extended heat cycling. Exposure to moisture or condensation could compromise insulation integrity as well. Physical punctures may develop from accidental impact or installing range components.

This replacement insulation works for Jenn-Air, KitchenAid, and select Kenmore oven ranges too. 

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This electronic control board replaces the refrigerator's main user interface and control module to restore digital controls and programmed features. It provides the board-level electronics that manage display, buttons, and control signals. What it does:

• Receives button/knob inputs and runs the unit's control logic
• Manages display readouts and electronic indicators
• Sends control signals to compressor, fans, and dispenser/ice functions
• Stops unit response or causes error codes when failing

• Disconnect power to the appliance before starting any work.
• Handle the board by edges and avoid static discharge; use anti-static precautions if available.
• Verify the appliance model and part number match before installing.

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.

This heat shield protects oven or range components from direct heat, helping prevent damage to nearby panels and wiring. It's a direct-replacement exterior shield used when existing metal shields are warped, cracked, or missing. What it does:

• Diverts and dissipates heat away from control panels, insulation, or adjacent components
• Helps stop heat-related discoloration, warping, or premature wear of nearby parts
• Restores proper clearance and airflow around the oven cavity after shield damage
• Commonly replaced when you see scorched areas, melted trim, or gaps where a shield once sat

• One heat shield (exact shape and mounting holes as shown in OEM diagram)

• Disconnect electrical power (and gas, if applicable) before starting any repair
• Remove oven racks and any trim panels to access the shield; keep track of fasteners
• Compare the replacement to the removed part to confirm fit before fastening
• If mounting hardware is damaged or missing, procure correct OEM fasteners — only the shield is guaranteed to ship