Wfg540hoes1 Parts

Color: Grey/Chrome - This is a control knob that is used on many stoves, ranges, and ovens. The control knob is the component that controls the heating elements. The control knob is used to turn the elements from off to on and back. They also control the temperature settings. Regular use can start to strip the inside of the knobs so they do not fit properly over the shaft. When this occurs, the heating elements cannot be controlled. The control knob will need to be replaced to safely use the stove or oven. When replacing the control knob, the stove should be powered off and cool to the touch. Use a flathead screwdriver to pry the original knob off of the range so the control shafts can be seen. Use a degreaser to clean the control panel and shafts before placing the new control knob. Make sure the appliance is powered on before use. This control knob is sold as an individual product. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The knob is made to be used with ranges, stoves, and ovens manufactured by Whirlpool.

This control panel is the front fascia that houses the cycle buttons and indicators on your appliance. Replacing a damaged or unresponsive panel restores reliable selections and a clean, factory appearance.

• Provides the user interface for selecting cycles and options
• Communicates button presses to the control system to start and customize operation
• Covers and protects components while finishing the appliance's front
• Common symptoms: cracked/broken console, worn or sticky buttons, selections not registering, intermittent response

• Disconnect power at the breaker before servicing
• Remove mounting screws/clips to release the existing console; support it to avoid straining wiring
• Transfer the user interface module and any brackets from the old panel as needed; avoid pinching ribbon cables
• Reinstall hardware and verify button response before completing reassembly

This backsplash restores the rear trim behind a range or cooktop, protecting the wall and covering wiring openings for a clean, factory-look finish. It replaces a damaged, dented, or missing backsplash to improve safety and appearance. What it does:

• Covers the gap between the cooktop and the wall to block spills, splashes, and heat from reaching the wall surface
• Hides wiring and mounting holes for a neat, finished look
• Replaces bent, cracked, or corroded rear trim that can collect grease and grime
• Helps maintain proper clearance and original appearance of the appliance

• One single-piece backsplash

• Basic hardware and mounting locations are OEM-specific; confirm matching fasteners on arrival
• Turn off power to the appliance and move the unit away from the wall before removing or installing the backsplash
• Use care to avoid scratching the finish during installation; two people may be needed for larger ranges
• If mounting holes or brackets are damaged, replace those items before installing this backsplash

This spacer provides a precise gap for proper alignment and clearance between components, helping maintain correct part positioning for reliable operation. It's a simple replacement that restores intended spacing and reduces wear. What it does:

• Positions and separates adjoining parts to maintain correct clearance
• Helps prevent rubbing, misalignment, or binding of moving components
• Restores factory spacing after maintenance or part replacement
• Fits where the original spacer was used to support assembly alignment

• One spacer as shown

• Inspect surrounding components and mounting surfaces for damage before installing
• Remove power to the appliance and follow manufacturer service instructions
• Install in the same orientation as the original spacer and verify proper clearance
• If fasteners or adjacent parts are worn, replace them to ensure a secure fit

This replacement Holder ORF retainer secures internal components so moving parts stay in place and the appliance operates reliably. It's a simple, direct swap when the original holder is worn or broken. What it does:

• Secures an internal component or assembly to prevent shifting and rattling during operation
• Restores proper alignment of the part group it supports
• Stops noises or intermittent contact caused by a loose or broken holder
• Helps prevent further wear or damage to adjacent parts by maintaining correct positioning

• Disconnect power or unplug the appliance before beginning any repair
• Inspect surrounding parts for damage and replace any worn fasteners
• Basic hand tools are typically required; avoid forcing clips or tabs

This 18-inch supply power cord delivers a reliable electrical connection to restore appliance power and safe operation. It replaces a damaged or missing cord so the unit can receive power from the wall outlet. What it does:

• Provides the main AC connection between the appliance and household power
• Replaces frayed, melted, or broken cords that cause intermittent power or no power
• Restores secure plug and strain-relief connection to reduce arcing and overheating risks
• Matches factory-style terminal ends for a direct fit when compatible

• One 18-inch supply power cord

• Disconnect power at the breaker or unplug the appliance before starting
• Inspect terminals and cord routing; secure with the factory strain relief
• Tighten terminal connections firmly but do not overtighten; confirm proper insulation

This orifice holder assembly secures the burner orifice to the gas valve so the cooktop gets the correct gas feed for reliable ignition and consistent flame control. Replaces a worn or damaged holder to restore proper burner operation. What it does

• Holds the burner orifice in place at the valve outlet for correct gas flow
• Helps maintain consistent flame size and even heating across the burner
• Can address symptoms like weak or uneven flames or a burner that won't light reliably
• Prevents orifice movement that can cause improper combustion or intermittent ignition

• Turn off gas supply and electrical power before servicing; follow local codes
• Inspect the orifice and surrounding fittings for damage or debris during replacement
• Tighten to manufacturer torque; avoid overtightening which can damage threads

This Door Glass is the OEM replacement glass panel for the appliance door, restoring a clean appearance and protecting interior components. It replaces damaged, cracked, or scratched door glass so the door looks and functions like new. What it does:

• Replaces broken, cracked, or chipped door glass to restore safety and appearance
• Provides a protective barrier for internal components and insulation
• Helps maintain proper visibility through the door
• Restores a finished exterior surface for easy cleaning

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully and wear cut-resistant gloves and eye protection
• May require partial or full door disassembly—keep track of fasteners and hardware

Color: White  Note: Right side endcap

This control panel is the appliance's main electronic user interface, restoring access to cycle selection, settings, and status feedback so you can operate the unit normally. It replaces a cracked, unresponsive, or malfunctioning front control assembly. What it does:

• Provides the touchpad/buttons and display for selecting cycles and options
• Sends user commands to the appliance's main control for operation
• Common symptoms it resolves: unresponsive or stuck buttons, blank or unreadable display, incorrect or missing control feedback
• Restores normal user interaction when the front control has cosmetic damage or intermittent function

• Disconnect power to the appliance before starting any repair
• Handle the panel gently to avoid damaging the display, ribbon cable, or connectors
• Installation typically requires removing the front fascia or door trim; keep track of screws and clips

An orifice holder assembly that secures the gas orifice for proper burner operation, guiding fuel to the burner for stable ignition and flame control. Replaces a worn or damaged holder to restore correct gas flow alignment and safe burner performance. What it does:

• Holds the gas orifice in the correct position so the burner receives fuel at the proper outlet
• Helps ensure consistent ignition and a steady flame; can address intermittent lighting or weak flames
• Restores proper alignment after damage or corrosion to the original holder
• Used on gas ranges/ovens where the orifice mounts into a removable holder

• One orifice holder assembly

• Turn off the gas supply and electrical power before attempting service
• Inspect surrounding gaskets and fittings; replace any damaged seals for a safe gas connection
• Hand-tighten per OEM guidance; avoid over-tightening which can damage the holder or orifice

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Color: White  Note: Left side endcap