Wfg6320mcb50 Parts

This burner baffle sits under the cooktop burner to direct heat and protect surrounding components, helping maintain even flame distribution and preventing debris from falling into the burner area. What it does:

• Shields the area under the burner from spills, grease and food debris.
• Helps route heat and combustion gases away from sensitive components.
• Supports stable burner operation and consistent heating performance.
• Commonly replaced when warped, corroded or damaged by spills.

• Turn off gas and power to the appliance before servicing; follow all safety precautions.
• Remove burner grates and caps to access the baffle; use basic hand tools.
• Inspect surrounding components (burner head, igniter) while the baffle is removed.

This wire harness assembly routes power and signals between the appliance control and internal components, restoring reliable electrical connections for proper operation. Designed as a direct plug-in replacement to replace a damaged or worn wiring assembly. What it does:

• Provides factory-style electrical connections between the control board and powered components
• Carries control signals and power so motors, heaters, lights, or sensors operate correctly
• Common symptom: appliance won't start or specific functions are unresponsive
• Common symptom: intermittent operation or visible damaged/burned wires/connectors

• Disconnect the appliance from power (unplug or turn off breaker) before starting
• Compare new harness to the original to ensure connector types and routing
• Route and secure harness away from moving parts and heat sources per service instructions
• If terminals are corroded or connectors damaged, replace the harness rather than attempting repairs

This is a genuine replacement screw used to fasten panels, trim, and small appliance components. Replacing a damaged or missing screw restores secure mounting and reduces vibration or rattling. What it does:

• Secures panels, brackets, or trim pieces to appliance frames or assemblies
• Prevents loose parts that can vibrate, rattle, or misalign controls
• Replaces stripped, corroded, or lost screws to restore proper fit
• Small hardware solution for routine repairs and maintenance

• Use the matching screw hole and thread carefully to avoid cross-threading
• Hand-start the screw, then tighten with the correct driver until snug; do not over-tighten
• Disconnect power and follow appliance safety procedures before accessing internal parts
• Apply penetrating oil and proceed gently if the original screw is corroded or seized

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

Color: White

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

Standard aluminum surface burner that replaces a damaged or worn top burner to restore even, stable cooking heat and cookware support. Installs on the cooktop to bring back predictable heating performance. What it does:

• Provides the primary cooking heat under pots and pans on the cooktop surface.
• Replaces warped, cracked, or worn burners that cause uneven heating or poor cookware contact.
• Restores consistent flame/contact for more even cooking and safer operation.
• Sits into the burner socket for a secure fit with the existing cooktop hardware.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Handle carefully — edges may be sharp; use gloves if needed.
• Align and seat the burner into the socket; verify secure connection and proper seating before restoring power.

This orifice is the small, precision gas fitting that meters fuel to a single burner for correct combustion and stable flame. It restores proper burner performance and helps maintain consistent heating. What it does:

• Controls gas flow to a burner so the flame size and heat output are correct
• Helps produce an even, stable flame for reliable cooking or heating
• Can address symptoms like weak or uneven flames, poor ignition, or burners that won't maintain heat
• Works with the burner tube and valve as part of the gas delivery system

• Turn off the gas supply and unplug the appliance before starting work
• Use the correct orifice size and tighten to OEM torque; loose or damaged fittings can leak
• After installation, check all connections for gas leaks with a soap solution or approved leak detector

This burner valve controls the gas flow to a single surface burner, restoring reliable ignition and consistent flame control for gas ranges. It's a direct-fit replacement when the existing valve fails. What it does

• Regulates gas delivery to one surface burner so the burner lights and holds a steady flame
• Commonly replaces valves that cause weak or no flame at a burner
• Helps stop erratic flame behavior caused by faulty gas regulation
• Works with the range's control knob to adjust flame size safely

• One burner valve

• Turn off the gas supply and electrical power before starting work
• Verify the fit and orientation before final installation; some disassembly of the cooktop or manifold may be required
• Use proper gas fittings and check all connections for leaks with a soapy-water test after installation

This is a direct-replacement screw used to secure appliance panels, brackets and other small components. It restores proper fastening where the original screw is missing, stripped, or corroded to help reduce rattles and looseness. What it does

• Fastens panels, trim, brackets and similar small appliance parts
• Restores a secure connection when the original fastener is missing or damaged
• Helps stop vibration-related rattling and movement of mounted components
• Matches the original mounting point to maintain proper alignment

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to the mating part
• Replace only with the same part number or equivalent for proper fit