Wfl 2060/Wfr Parts

This OEM part is a Bosch washer drum assembly. The drum is the cylindrical piece that is found inside the washer where the clothes are put. Damage to the drum cause it to not rotate properly. If the drum is making excessive noise during the wash cycle and appears to be misaligned, damaged, or broken, it might be time for a replacement. Luckily, replacing this drum is a relatively simple process. Start by removing the front panel of the washing machine. Then proceed to remove the top and back panels. After gaining access to the interior of the machine, disconnect any hoses attached to the drum and take note of where they go. Using a screwdriver, remove the screws that hold the drum to the machine. Lift the drum out, and replace it with the new one. Be sure to re-attach the hoses properly. Secure the front back and top panels of the washer. This genuine replacement drum assembly is compatible with Bosch washing machines.

This water level regulator controls the appliance's water fill by sensing and regulating pressure/level for proper operation. Replacing a failing regulator restores correct fill behavior and helps prevent over- or under-fill conditions. What it does:

• Senses water level/pressure and signals the fill system to start or stop water flow
• Prevents overfilling by stopping the inlet when the correct level is reached
• Helps avoid underfilling that can cause poor wash or rinse performance
• Resolves symptoms like continuous filling, no fill, or erratic water levels

• Water level regulator

• Disconnect power and turn off the water supply before attempting replacement
• Handle electrical connections and hoses carefully; note wiring positions for reassembly
• Inspect hoses and seals for damage and replace if cracked or brittle
• Test the appliance through a short cycle after installation to ensure proper fill and operation

This fastening ring secures a rotating or stationary component in place to help prevent movement and vibration. It restores proper fit and alignment so assemblies run quietly and components stay locked in position. What it does:

• Holds shafts, bearings or housings in position to prevent axial movement
• Helps stop rattling, wobble or misalignment caused by a loose retaining component
• Maintains a secure mechanical connection between mating parts
• Used wherever a snap/retaining ring is required to lock a component on a shaft or in a bore

• Disconnect power and water before beginning any repair
• Use the correct pliers or tools for snap/retaining rings to avoid deformation
• Verify the ring matches the OEM part number and seating location before installation

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

The Motor is an OEM part for Bosch washing machines. This motor powers the drive system that spins the wash basket during the spin cycles.

Causes of a bad motor can include normal wear and tear over time, failure of motor windings from continuous use, or damage from foreign objects inadvertently washed that may have disrupted motor function.

Symptoms of a bad motor include:

• The washer failing to agitate or spin clothes during cycles
• Abnormally long cycle times
• Loud grinding/rubbing noises coming from motor area
• The spin cycle not spinning fast enough to extract water

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This drain reservoir is the dishwasher plumbing housing that collects and directs wastewater to the drain pump, helping prevent internal leaks and ensuring proper draining. Replace a cracked or clogged reservoir to restore reliable water flow and reduce water under the unit. What it does:

• Funnels wastewater from the tub to the drain pump so the machine can evacuate used water
• Helps contain minor spills and prevents water from reaching sensitive electronics
• Works with the drain pump and hoses to maintain proper drainage
• Commonly causes water pooling under the dishwasher, slow or no drain cycles, or visible leaks when damaged

• Disconnect power to the appliance before starting any repair
• Shut off water supply and remove lower access panels or kickplate as needed
• Handle with care to avoid damaging adjacent hoses, clips, or wiring; replace any worn seals

This dispenser door is the outer cover for the dishwasher detergent cup, providing a secure compartment for powder or tablet detergent until the wash cycle releases it. Restores proper detergent release and keeps the cup sealed during fill and wash. What it does:

• Covers and seals the detergent cup so detergent stays dry until the cycle releases it
• Pops open at the correct time so detergent dispenses into the wash
• Replaces cracked, warped, or otherwise damaged doors that won't latch or open
• Helps prevent detergent from dissolving prematurely or leaking into the tub

• Disconnect power and water to the appliance before servicing
• Remove the inner door panel or access the dispenser per the service manual to replace the door
• Handle plastic parts carefully to avoid damage; use proper hand and eye protection

This replacement hose-pressure chamber routes water to the dishwasher's pressure chamber so the machine can sense and control water level. Restores proper pressure sensing to help prevent overfilling and fill errors. What it does

• Connects the sump/water path to the pressure chamber so the water-level sensor can detect fill height.
• Replaces cracked, pinched, or collapsed hose that can cause inaccurate water-level readings.
• Commonly used when dishwasher shows overfill, won't fill correctly, or reports water-level or pressure-related errors.
• Flexible vinyl tubing designed for routing in tight spaces without kinking.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect nearby fittings and the pressure chamber for wear; replace clamps if damaged.
• Push-fit or clamp the hose securely to both ports; ensure there are no kinks or sharp bends.

Color: White. Size: 1 qt. can. Acrylic appliance paint.