Wfl 2060/Wfr Parts

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

This flexible door boot gasket seals the dishwasher door to prevent water leaks and keep hot wash water inside the tub. It restores a tight, even fit between the door and tub for reliable operation. What it does:

• Creates a watertight seal along the door opening to reduce or stop leaks
• Helps maintain proper wash temperatures and simplify drying performance
• Prevents soil and water from escaping during wash cycles
• Worn, torn, or flattened gasket may cause visible leaks or pooling at the base

• One replacement door boot gasket

• Disconnect power and water supply before beginning any service
• Remove the dishwasher door or inner door panel per manufacturer instructions to access the gasket
• Align the gasket evenly around the door opening without twisting or over-stretching
• Inspect door and tub surfaces for damage and test for leaks after reassembly

This spin speed knob lets you select wash spin settings so you can adjust water extraction for different loads. It replaces a worn, cracked, or loose dial to restore clear speed selection and smooth control. What it does:

• Selects the washer's spin speed setting for proper water extraction
• Restores firm, accurate dial operation when original knob is loose or broken
• Helps prevent accidental speed changes during a cycle
• Matches OEM fit and detent locations for correct alignment

• Remove power from the appliance before attempting replacement
• Typically pulls off the control shaft; inspect for retaining clip or set screw
• If knob does not seat fully, verify shaft and index tab are undamaged

This wire harness connects the dryer drum drive motor to the appliance wiring, restoring reliable electrical connections so the drum can receive power and operate as intended. Fits specific Bosch drum drive assemblies. What it does:

• Routes and secures electrical connections between the drive motor and main wiring harness
• Restores power delivery to the drum drive motor when the original harness is damaged
• Helps resolve symptoms such as the drum not turning or intermittent motor operation
• Prevents loose or corroded connections that can cause arcing or failure

• Disconnect power at the breaker or unplug the appliance before servicing
• Use basic hand tools; avoid pinching or stretching the harness during installation
• After install, reconnect power and run a test cycle to confirm proper drum operation

This window frame is the door trim piece that holds and secures the viewing glass, restoring the door's fit and finished appearance. Use it to replace a cracked, warped, or missing frame so the door closes and looks correct. What it does:

• Secures the viewing glass in the appliance door and maintains a flush exterior finish
• Helps keep the glass aligned so the door seals and closes properly
• Restores the door's cosmetic appearance when the original frame is cracked, dented, or worn
• Provides the structural support needed around the window opening to prevent rattling or movement

• Disconnect power and follow manufacturer safety guidelines before starting any repair
• Handle glass carefully; wear gloves and eye protection to avoid cuts
• Require removing the door panel and a few screws or clips—retain original fasteners unless replacements are provided

This base panel replaces the lower access panel on compatible dishwashers, covering and protecting the unit's underside and internal components while maintaining a finished appearance at the appliance base. What it does:

• Covers the dishwasher's lower cabinet area to protect internal components from debris and accidental contact
• Provides the finished exterior look at the appliance base
• Helps keep access points secure for proper routing of drain and wiring assemblies
• Matches OEM fit and attachment locations for a straightforward replacement

• Disconnect power and shut off the water supply before starting
• Remove the toe kick or lower access screws to access and remove the old panel
• Align mounting tabs and secure with the original screws; retain all fasteners
• Handle edges carefully to avoid scratches; before restoring power

This spring-style hose clamp secures flexible water hoses to fittings to help prevent leaks and keep connections tight. It's a simple replacement that restores a proper seal at the hose connection. What it does:

• Compresses around a hose to hold it firmly on a tailpiece or barb
• Helps stop leaks or drips caused by loose or worn clamps
• Restores proper clamping force when original clamp is corroded or stretched
• Common symptom: visible water at the hose connection or water pooling under the appliance

• One spring-style hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, push hose fully onto the fitting, then position clamp over the barb
• Use pliers to expand the clamp, seat it, and release to lock; avoid over-compressing the hose
• Replace any damaged hoses or fittings and test for leaks after restoring water and power

This door glass is the clear replacement glass for the front washer door, restoring visibility and a watertight barrier so you can safely view loads and keep laundry contained during cycles. What it does:

• Replaces cracked, chipped, or shattered front washer door glass
• Restores a clear viewing window so you can monitor the wash without opening the door
• Helps maintain a proper seal to prevent water leaks when installed with intact door gaskets
• Preserves safety and integrity of the door assembly when tempered glass is used

• 1 door glass

• Disconnect power and turn off water supply before beginning work
• Handle glass carefully; wear protective gloves and eye protection
• Removal typically requires taking the door or door panel off the hinge and separating the trim; follow your model's service manual