Wfl2090 Parts

This rubber sealing ring replaces a worn or damaged seal to help stop water leaks and maintain a tight fit where two appliance parts meet. It's a direct-fit replacement designed for reliable sealing performance. What it does

• Creates a watertight barrier at the mating surface to prevent leaks and drips
• Restores proper sealing pressure when the original seal is cracked, flattened, or brittle
• Helps prevent water damage and maintains appliance efficiency by stopping unintended water escape
• Common symptom: visible leaking, dripping, or moisture collecting near a joint or connection

• One rubber sealing ring

• Disconnect power and shut off water supply before starting any repair
• Remove the old seal completely and clean mating surfaces of debris, residue, or mineral buildup
• Inspect the mounting area for damage; replace any damaged components before installing the new seal
• Press the new seal evenly into place; test for leaks by running a short cycle and checking the connection

This dispenser tray replaces the plastic cup that holds detergent and rinse agent inside the dishwasher dispenser assembly, restoring proper detergent placement for even cleaning and reduced residue. What it does:

• Holds detergent/rinse agent in the dispenser so it releases during the wash cycle
• Ensures proper alignment with the dispenser cover and release mechanism
• Helps prevent detergent from pooling or leaving residue on dishes when cracked or warped
• Restores correct dispenser function when the original tray is damaged or missing

• Disconnect power to the appliance before beginning any repair.
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the tray.
• Replace the tray by seating it into the dispenser housing until it snaps or aligns in place; avoid forcing parts.
• After reassembly, run a short cycle to ensure proper detergent release.

This drum bearing set replaces worn bearings that support the dryer drum and enable smooth, stable rotation, restoring quieter operation and reducing wobbling, grinding, or squealing caused by failed bearings. What it does:

• Supports and stabilizes the drum shaft to maintain smooth drum rotation.
• Replaces worn or noisy bearings that can cause loud squealing or grinding.
• Reduces drum wobble and vibration that can lead to rubbing or uneven wear.
• Helps restore proper drum alignment for smoother operation.

• Disconnect power (unplug the appliance or switch off the circuit) before starting any repair.
• Replacement typically requires drum access/removal and basic hand tools; inspect the appliance service manual or diagram for disassembly steps.
• Inspect the shaft, seals, and surrounding components for wear while the drum is removed and replace any damaged parts.

This water inlet hose gasket seals the connection between the supply hose and the appliance's inlet fitting. Replace a flattened or damaged washer to stop drips at the coupling and restore a reliable, watertight connection.

• Creates a watertight seal at the inlet hose-to-appliance connection
• Helps prevent drips, puddles, and water damage around the machine
• Replace if the old gasket is cracked, hardened, flattened, or missing
• Common symptoms: leaking at the hose coupling or needing to retighten the fitting to stop drips

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water, then detach the inlet hose from the appliance fitting
• Remove the old gasket from the hose coupling and seat the new gasket evenly
• Reattach and hand-tighten the coupling; open water supply and check for leaks—do not overtighten

This rear drum motor mounting bushing supports the motor shaft at the back of the tub, keeping the drum aligned and reducing wear. It restores smooth drum rotation and helps reduce noise and vibration when functioning properly. What it does:

• Centers and supports the motor shaft to maintain proper drum alignment.
• Cushions rotating components to reduce squealing, grinding, or scraping noises.
• Helps prevent excess drum wobble and uneven wear on the tub and bearings.
• Can stop intermittent rubbing or burning smells caused by a worn mounting surface.

• Disconnect power before starting and follow all safety precautions; service panels may have sharp edges.
• Access typically requires removing the dryer/heater assembly and drum.
• Inspect mating surfaces and surrounding components (shaft, bearing, seal). Replace any excessively worn parts to prevent repeat failures.
• Use only OEM-recommended parts and fasteners; do not force or press the part in without proper alignment.

This OEM part is a Bosch washer drum assembly. The drum is the cylindrical piece that is found inside the washer where the clothes are put. Damage to the drum cause it to not rotate properly. If the drum is making excessive noise during the wash cycle and appears to be misaligned, damaged, or broken, it might be time for a replacement. Luckily, replacing this drum is a relatively simple process. Start by removing the front panel of the washing machine. Then proceed to remove the top and back panels. After gaining access to the interior of the machine, disconnect any hoses attached to the drum and take note of where they go. Using a screwdriver, remove the screws that hold the drum to the machine. Lift the drum out, and replace it with the new one. Be sure to re-attach the hoses properly. Secure the front back and top panels of the washer. This genuine replacement drum assembly is compatible with Bosch washing machines.

This fastening ring secures a rotating or stationary component in place to help prevent movement and vibration. It restores proper fit and alignment so assemblies run quietly and components stay locked in position. What it does:

• Holds shafts, bearings or housings in position to prevent axial movement
• Helps stop rattling, wobble or misalignment caused by a loose retaining component
• Maintains a secure mechanical connection between mating parts
• Used wherever a snap/retaining ring is required to lock a component on a shaft or in a bore

• Disconnect power and water before beginning any repair
• Use the correct pliers or tools for snap/retaining rings to avoid deformation
• Verify the ring matches the OEM part number and seating location before installation

The Motor is an OEM part for Bosch washing machines. This motor powers the drive system that spins the wash basket during the spin cycles.

Causes of a bad motor can include normal wear and tear over time, failure of motor windings from continuous use, or damage from foreign objects inadvertently washed that may have disrupted motor function.

Symptoms of a bad motor include:

• The washer failing to agitate or spin clothes during cycles
• Abnormally long cycle times
• Loud grinding/rubbing noises coming from motor area
• The spin cycle not spinning fast enough to extract water

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This drain reservoir is the dishwasher plumbing housing that collects and directs wastewater to the drain pump, helping prevent internal leaks and ensuring proper draining. Replace a cracked or clogged reservoir to restore reliable water flow and reduce water under the unit. What it does:

• Funnels wastewater from the tub to the drain pump so the machine can evacuate used water
• Helps contain minor spills and prevents water from reaching sensitive electronics
• Works with the drain pump and hoses to maintain proper drainage
• Commonly causes water pooling under the dishwasher, slow or no drain cycles, or visible leaks when damaged

• Disconnect power to the appliance before starting any repair
• Shut off water supply and remove lower access panels or kickplate as needed
• Handle with care to avoid damaging adjacent hoses, clips, or wiring; replace any worn seals