Wfl260 Parts

The Drive Belt is an OEM part for Bosch washing machines. It is responsible for transferring power from the wash motor to the wash drum, providing rotational motion needed for thorough cleaning cycles.

Causes of a bad drive belt can include wear and tear over thousands of wash cycles, cracks developing from repeated flexing and stretching. Accumulation of lint or other debris wrapped around the belt could also impact performance over time.

Symptoms of a bad drive belt include:

• Abnormal noises or vibrations coming from the washer during operation
• Reduced or inefficient spinning of the wash drum
• Clothing not receiving full agitation or movement for effective cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door hinge bushing sits between the hinge and pivot point to reduce friction and wear. Replacing a worn bushing restores smooth, quiet door movement and helps keep the door properly aligned over time. What it does:

• Provides a smooth, low-friction pivot surface for the hinge
• Helps maintain door alignment and consistent opening/closing feel
• Reduces squeaks, grinding, or binding from the hinge area
• Replaces cracked, flattened, or missing bushing that can make the door feel loose or stiff

• 1 door hinge bushing

• Disconnect power to the appliance before servicing
• Support the door to relieve hinge tension; hinges may be spring-loaded—control door movement
• Access the hinge per your model's service information and note the bushing's orientation
• Install the new bushing, reassemble, and test door travel and latching

The Lock-Electrical is an OEM part for Bosch washing machines. It serves as the latching mechanism that securely locks the washer door shut during active cycles. This locking component plays an important safety role by keeping the portal tightly closed while washing and spinning functions are underway.

Causes of a faulty lock-electrical can include wear from heavy use over time, water damage to internal electrical parts, or failed components governing the locking function.

Symptoms of a malfunctioning lock-electrical include:

• The door popping or being able to open during spinning or other active cycles
• Fault lights or failure to initiate wash cycles
• Loose, misaligned, or wobbly door latching motion
• Inability to fully secure the door in the closed position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This window frame is the replacement trim piece that surrounds and secures the door glass, restoring the door's finished appearance and helping maintain a proper seal. Use it to repair damaged or loose door trim. What it does:

• Secures and frames the door glass so the door looks and fits correctly
• Helps keep the glass properly positioned to maintain a tight fit
• Replaces cracked, warped, or cosmetically damaged trim
• Can reduce air gaps and rattling caused by a loose or broken frame

• Intended for experienced DIYers;
• Power off and disconnect the appliance before beginning any door disassembly
• Handle glass and trim carefully to avoid damage or personal injury; wear gloves and eye protection
• Use only the specific replacement frame for your model to ensure correct fit

This washing machine shock absorber stabilizes the outer tub during wash and spin. Replacing a weakened damper helps control vibration and noise so the washer runs smoother and is less likely to shake, bang, or walk.

• Mounts between the tub assembly and cabinet/base to cushion movement
• Helps prevent excessive vibration, shaking, and thumping noises
• Can reduce "walking" or out-of-balance interruptions when a damper is worn
• Supports smoother, quieter spin performance

• Disconnect power and turn off water supply before servicing
• Remove the appropriate access panel(s) to reach the dampers
• Support the tub when removing mounting pins/bolts; match the original orientation
• Inspect all dampers; replace any that show wear for balanced performance

Door handle pin secures the appliance door handle to the door assembly, restoring a firm, stable grip and preventing the handle from slipping or detaching. What it does:

• Acts as the pivot/fastening pin that holds the door handle to the door or door trim.
• Replaces worn, bent, or broken pins that cause loose, wobbly, or sagging handles.
• Helps prevent the handle from falling off or catching when opening and closing the door.
• Restores proper alignment and reliable leverage for normal door operation.

• Disconnect power to the appliance before starting any work; for water-connected appliances also turn off water supply.
• Remove the handle and any trim carefully to access the pin; keep small fasteners in a safe place.
• Install the pin in the same orientation as the original; if retaining clips or bushings were present, reuse or replace them as needed.
• If you encounter springs, clips, or hidden fasteners, proceed cautiously.

This electrical door lock assembly secures the appliance door during cycles so the machine can run safely and reliably. It replaces a failed lock to restore proper door latching and allow normal operation. What it does:

• Electrically latches the door during start and while a cycle runs
• Prevents the door from opening mid-cycle for safety and wash integrity
• Common symptom: dishwasher won't start, shows a door or lock error, or door won't stay closed

• One electrical door lock assembly

• Disconnect power before beginning work to avoid shock or injury
• Remove door access panels or inner door trim as required for access
• Handle latch and surrounding trim carefully to avoid damage to the door or wiring
• Test door operation and run a short cycle after installation

The Drain Pump is an OEM part for Bosch washing machines. This pump works to remove water from the washer tub at the end of each cycle, preventing excessive moisture buildup.

Causes of drain pump failure can include blockages in the pump or drainage system that restrict water flow, wearing of internal pump components, or the motor bearing seizing up over time.

Symptoms of a bad drain pump include:

• The washer failing to complete drain cycles fully
• Excessive water remaining in the tub after cycles
• Strange noises or vibrations coming from the pump area
• Drain hoses not properly emptying or gurgling

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This flexible drain hose routes wastewater from the dishwasher tub to the drain pump or household drain, helping remove used water after a cycle. It replaces a damaged or leaking hose to restore proper draining. What it does

• Carries wastewater from the dishwasher to the drain pump or disposal
• Stops leaks and prevents water pooling when the original hose is cracked or split
• Helps resolve slow or incomplete draining caused by a compromised hose
• Fits the factory hose connections and follows the cabinet routing to avoid kinks

• One flexible drain hose

• Disconnect power and turn off water before beginning any repair
• Remove the lower access panel or toe kick to reach hose connections
• Inspect and follow the original routing; avoid sharp bends or kinks that restrict flow
• Secure hose with appropriate clamps and check all connections for leaks after testing

This front drum motor mounting bushing supports the dryer drum shaft and helps the drum spin smoothly for quiet, even drying. It replaces a worn bearing surface to reduce noise and prevent drum misalignment. What it does:

• Provides a low-friction bearing surface for the drum shaft at the front motor mount
• Helps keep the drum properly aligned during rotation
• Reduces squealing, grinding, or rubbing noises caused by a worn front bushing
• Prevents excess wear on the drum shaft and adjacent components when functioning correctly

• One front drum motor mounting bushing

• Disconnect power before beginning any repair and follow all safety precautions
• Inspect the drum shaft, drum seal, and rear bushing for wear and replace as needed
• Use appropriate tools to remove the old bushing and press or seat the new bushing evenly
• Re-check installation and related components if alignment or noise persists after replacement

The Hose Clamp is an OEM part for Bosch washers. This clamp secures connecting hoses to direct water flow where needed.

Causes of a bad hose clamp can be wear and tear over time, accidental damage from maintenance or repairs, or degradation of the clamp material from chemical exposure.

Symptoms of a bad hose clamp include:

• Leaks around hose connections
• Loose or detached hoses
• Disrupted water flow impacting cleaning performance

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

2 included - Front load

This adjustable leveling foot provides a stable, height-adjustable support for appliances, helping restore proper alignment and reduce rocking. It replaces worn or damaged feet to keep the appliance level and secure on uneven floors. What it does

• Supports and stabilizes the appliance by allowing height adjustment
• Helps eliminate rocking, tipping, or uneven gaps caused by a damaged or missing foot
• Restores proper appliance alignment for smooth door operation and even performance
• Designed for use where the OEM lists a removable/replaceable foot component

• One adjustable leveling foot

• Inspect mounting location and hardware; replace any damaged clips or screws before installing
• Hand-start threads, then tighten with appropriate tool until secure; avoid overtightening
• Unplug or disconnect power before service if reaching into the cabinet or near wiring

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation