Wfvc5400uc19 Parts

This replacement screw restores secure mounting for appliance panels and components so parts sit correctly and don't rattle or shift during use. Simple, direct fit for repairs that need the original-style fastener. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores proper alignment and prevents vibration or rattling sounds
• Replaces missing or stripped screws that allow parts to move or hang
• Helps maintain safe operation by keeping covers and guards fastened

• One screw

• Disconnect power to the appliance before starting work
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and seat straight; do not overtighten
• Keep removed hardware organized to ensure all fasteners are returned to their original locations

This shock absorber cushions and controls the dishwasher door, reducing slamming and helping the door open and close smoothly for safer, quieter operation. It restores proper door support and smoother movement. What it does:

• Dampens door motion to prevent slamming and sudden drops
• Reduces vibration and rattling during operation
• Helps the door stay in position when opened or closed
• Common symptom: door falls open, closes too quickly, or makes loud noises

• One shock absorber

• Disconnect power and water supply before beginning work
• Support the door while removing/installing the shock to prevent injury or damage
• Follow the appliance diagram for correct orientation and mounting; use proper tools and avoid forcing components

This rear drum motor mounting bushing supports the motor shaft at the back of the tub, keeping the drum aligned and reducing wear. It restores smooth drum rotation and helps reduce noise and vibration when functioning properly. What it does:

• Centers and supports the motor shaft to maintain proper drum alignment.
• Cushions rotating components to reduce squealing, grinding, or scraping noises.
• Helps prevent excess drum wobble and uneven wear on the tub and bearings.
• Can stop intermittent rubbing or burning smells caused by a worn mounting surface.

• Disconnect power before starting and follow all safety precautions; service panels may have sharp edges.
• Access typically requires removing the dryer/heater assembly and drum.
• Inspect mating surfaces and surrounding components (shaft, bearing, seal). Replace any excessively worn parts to prevent repeat failures.
• Use only OEM-recommended parts and fasteners; do not force or press the part in without proper alignment.

This white dispenser tray replaces a damaged or stained refrigerator dispenser drip tray to keep the area under the dispenser clean and catch spills. Restores proper fit and appearance for an even, tidy look. What it does:

• Collects drips and spills from the dispenser to protect the cabinet and floor
• Provides a finished, easy-to-clean surface under the dispenser area
• Snaps into the dispenser opening and holds securely under normal use
• Helps reduce odors and build-up by catching liquids before they reach internal surfaces

• Unplug or power off the appliance before removing the old tray
• Remove any standing water and debris, then lift or slide out the old tray per the appliance's user manual
• Align the new tray's tabs/rails with the dispenser opening and press until it seats
• If any clips are damaged or the tray doesn't seat securely, inspect surrounding trim before forcing into place

This dispenser top cover replaces the plastic lid that protects and conceals the dishwasher detergent dispenser, restoring proper appearance and function. It helps keep the dispenser mechanism clear and reduces detergent exposure. What it does:

• Replaces a cracked, warped or visibly damaged dispenser lid that won't close properly
• Protects the detergent compartment from moisture and debris during cycles
• Helps ensure the dispenser cover seals and opens as intended during wash cycles
• Visible cosmetic repair for chipped or faded dispenser trim

• Disconnect power and water to the appliance before beginning any repair
• Keep fasteners and clips organized during reassembly; do not overtighten plastic screws

The Control Module is an OEM component specifically designed for Bosch washers. As the command center for all wash functions, the control module is responsible for operating cycles, temperatures, water levels and more based on user selections.  

Causes of a bad control module can include wear and tear over time as the control module coordinates thousands of complex processes during machine operation. Exposure to moisture or impacts may also potentially damage electronic components.

Symptoms of a bad control module include:

• The washer not starting or responding to commands
• Inability to select or change wash cycles  
• Fault codes displayed
• Random or unexpected behaviors during the operation

This OEM Bosch part is also compatible with some Kenmore, LG, Maytag, Whirlpool, and Frigidaire models. 

This replacement hose-pressure chamber routes water to the dishwasher's pressure chamber so the machine can sense and control water level. Restores proper pressure sensing to help prevent overfilling and fill errors. What it does

• Connects the sump/water path to the pressure chamber so the water-level sensor can detect fill height.
• Replaces cracked, pinched, or collapsed hose that can cause inaccurate water-level readings.
• Commonly used when dishwasher shows overfill, won't fill correctly, or reports water-level or pressure-related errors.
• Flexible vinyl tubing designed for routing in tight spaces without kinking.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect nearby fittings and the pressure chamber for wear; replace clamps if damaged.
• Push-fit or clamp the hose securely to both ports; ensure there are no kinks or sharp bends.

This small mounting spacer positions and cushions appliance components to keep panels and parts aligned and reduce vibration. It restores correct clearance between parts for smoother, quieter operation. What it does:

• Keeps consistent gap and alignment between adjacent components or panels
• Cushions against vibration to help reduce rattling or noise
• Helps maintain proper fit of trim, panels, or assemblies that rely on a spacer
• Worn or missing spacers can cause misaligned panels, noise, or uneven gaps

• Disconnect power and water before accessing the area.
• Access may require removing trim, panels, or adjacent components; keep fasteners organized.
• Replace like-for-like; do not force parts into place—verify correct orientation before final assembly.