Wfw0499sw01 Parts

This wire harness routes power and signals between the appliance control and components to restore reliable electrical connections and normal operation. It replaces damaged or worn wiring to help stop intermittent power, unresponsive controls, or component failures. What it does:

• Connects control board to motors, switches, sensors and other electrical components
• Restores broken or frayed circuit paths that cause intermittent operation or no power
• Replaces burned, corroded, or loose connector ends that cause poor contact
• Helps prevent shorting or blown fuses when original wiring is compromised

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Handle connectors by the housing; avoid pulling on individual wires.
• Route and secure the harness the same way as the original to prevent pinching or heat exposure.

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well. 

This replacement console is the control panel assembly that holds the oven/range buttons and display, restoring user control and visible status information. It replaces a damaged, cracked, or non-responsive console to regain normal operation. What it does:

• Houses the control buttons, touchpads, and display used to set bake, broil, timers and other functions
• Transfers user input to the range's control board so cycles and settings start as commanded
• Restores a cracked, bent or cosmetically damaged front surface for a clean appearance
• Helps address symptoms such as unresponsive buttons, missing/obscured display elements, or visible physical damage

• Disconnect the appliance from power before servicing to avoid shock or injury
• Remove any trim/retaining screws and carefully disengage the console from the range front or backguard
• Note and gently disconnect wiring and ribbon connectors — avoid pulling on wires
• Reinstall in reverse order, then restore power and test functions

This stator is the stationary electrical component of the washer's motor assembly that helps generate the magnetic field needed for rotor movement. Replacing a faulty stator restores proper motor operation and agitation/spin performance. What it does

• Produces the magnetic field the motor's rotor needs to turn.
• Helps enable normal agitation and spin cycles in the washer.
• A worn or damaged stator can cause slow spins, no spin, intermittent motor operation, or unusual noises.
• Works with the rotor and motor control to deliver consistent motor torque.

• Disconnect power to the appliance before beginning repair to avoid electrical shock.
• Replacement typically requires motor housing access and removal of the old stator.
• Inspect rotor, wiring, connectors and motor mounting during replacement; replace any damaged components.

This shield is a protective cover that helps keep internal appliance components safe from heat, debris, and wear. Replacing a damaged shield restores protection to nearby parts and helps prevent further damage. What it does:

• Covers and protects internal components from debris, heat, and contact
• Helps prevent rubbing or chafing on wiring and nearby parts
• Reduces risk of heat-related damage when the original shield is warped or missing
• May stop rattling or vibration caused by a loose or broken shield

• Shield

• Disconnect power (and gas if applicable) before servicing
• Inspect the mounting area for damage or missing fasteners before installing
• Use the correct fasteners and alignment; do not force the shield into place

This is a replacement screw used to secure appliance panels and components so assemblies stay aligned and stable during use. It restores lost or damaged hardware for a snug, reliable fit. What it does:

• Secures panels, brackets, and small components in place
• Helps prevent vibration, rattling, or misalignment caused by missing or stripped screws
• Restores proper fit for access panels and mounted parts
• Works wherever the OEM screw specification matches the original fastener

• Disconnect power and gas before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Start threading by hand to avoid cross-threading; tighten securely but do not overtighten
• Keep removed hardware organized so you can match fasteners during reassembly

This genuine OEM magnet helps the appliance door seal stay securely closed to maintain proper temperature and efficiency. It replaces a worn or damaged magnet to restore normal door retention and reduce cold air loss. What it does:

• Holds the door closed by providing magnetic attraction along the door edge or latch area
• Helps maintain internal temperature and prevents warm air infiltration
• Commonly replaced when the door fails to stay shut or seals don't align
• Reduces excess run time caused by a door that won't fully latch

• Disconnect power to the appliance before performing work
• Remove the door gasket or trim as needed per your model's service instructions to access the magnet
• Handle the magnet carefully; sharp edges or adhesive backing may be present
• Keep magnets away from pacemakers, credit cards, and sensitive electronics during installation