Wfw6620hc Parts

The Hose is an OEM part for Whirlpool washers.  

Causes of a bad hose can include wear and tear over time, exposure to excess heat and moisture, or accidental damage.

Symptoms of a bad hose include:

• Extended drying times or inability to fully dry clothes
• Visible cracks or splits allowing airflow issues
• Loose or disconnected ductwork connections
• Musty odors indicating trapped moisture

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose is an OEM part for Whirlpool washing machines. As an integral part of the water inlet system, this reinforced rubber hose transports water from the home's supply lines into the washer. 

Symptoms of a bad hose can include:

• Leaks or drips from hose connections 
• Visible cracks or bulges in the rubber material
• Kinked or overly stiff hose that resists bending
• Water flow issues causing improper fill levels

Causes may relate to minerals/scale buildup weakening the hose over time, accidental cuts or punctures from improper handling, or flex fatigue from repetitive use. 

This Whirlpool replacement hose is constructed of durable rubber for years of leak-free service. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine brands.

Kit contains two 10 feet inlet hoses.

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The HARNESS WIRE is an OEM part for Whirlpool washing machines. It is a comprehensive wiring harness that connects all electronic control boards and components within the washer. 

Proper connectivity between parts through this harness is essential for running cycles, as it routes signals allowing for functions like temperature regulation, water fill levels, agitation control, and more. 

Causes of a bad harness can include pinched wires, cuts in the insulation, repeated bending in problem areas, or loose connections due to normal movement during operation.

Symptoms of a bad harness wire can include: 

• Error codes are displayed and cycles unable to advance past certain points
• Components like the motor not receiving control signals 
• Lights or displays not functioning correctly
• Intermittent or unreliable operation 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The CORD POWER is an OEM part for Whirlpool washing machines. It serves as the connection between the washer and a power source, supplying electricity needed to run cycles and components. 

This power cord contains wiring designed to meet Whirlpool's rigorous safety and performance standards. It delivers steady voltage to power essential parts like the motor, timer module, and heating elements without interruption.

Symptoms of a bad power cord include:

• The washing machine not powering on when switched to a cycle 
• Cycles starting and stopping intermittently
• Surges in voltage resulting in errors or burned-out components
• An electrical burning smell coming from the cord 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This front panel is the outer trim piece that restores the appliance's appearance and protects internal components from everyday wear. A direct-fit replacement when the original front is cracked, dented, or cosmetically damaged. What it does:

• Replaces the damaged or worn outer front trim to improve the appliance's look
• Protects underlying components and edges from knocks, spills, and general wear
• Helps ensure door alignment and proper sealing when used with intact internal parts
• Addresses visible damage like dents, cracks, chips, or peeling finish

• One front panel

• Disconnect power (unplug or switch off breaker) before starting work
• Remove door or drawer per service instructions to access mounting fasteners; retain all screws and clips
• Handle carefully to avoid scratching the finish; wear gloves if needed

This hinge is a direct-fit door pivot that supports and guides the appliance door for smooth opening and closing. It restores proper door alignment and helps maintain an even seal for efficient operation. What it does:

• Replaces a worn or damaged door pivot to stop sagging or misalignment
• Restores smooth door movement and reduces binding or catching
• Helps ensure the door seats properly to maintain internal temperature
• Addresses symptoms like a drooping door, uneven gaps, or noisy operation

• One hinge

• Unplug the appliance and shut off water (if applicable) before starting
• Support the door while removing fasteners to prevent dropping or damage
• Compare the old hinge to the new part to confirm orientation before installing
• Tighten mounting screws securely but avoid overtightening; test door operation after installation

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

Spring-style hose clamp that secures flexible appliance hoses to fittings, helping keep connections tight to reduce leaks and maintain proper water flow. Use it to replace a worn or damaged clamp and restore a reliable hose seal. What it does:

• Compresses around a flexible hose to lock it onto barbs or fittings
• Helps prevent drips, leaks, and water pooling at hose connections
• Keeps hoses from slipping off during appliance operation
• Useful when a clamp is corroded, stretched, or no longer holds tension

• Disconnect power and shut off water to the appliance before starting any repairs
• Use pliers to compress the clamp for removal and installation; keep hands and face clear when releasing tension
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn

This switch-sensor is a replacement electrical switch assembly that detects and transmits a user or door input to the appliance control, helping restore proper control signaling and machine operation. What it does:

• Acts as an electrical input switch to tell the control when a button, lever, or door is in a specific position
• Helps resolve symptoms like controls that don't respond, intermittent operation, or failure to detect a door/position
• Restores reliable signaling between the user/door mechanism and the appliance control
• Used where a failed switch prevents normal start, selection changes, or safety interlocks from engaging

• One switch-sensor switch assembly

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Access typically requires removing a panel or bezel; handle clips and connectors gently to avoid damage
• Do not force the part into place

This O-ring is a simple circular seal that prevents water or air leaks where two appliance components meet. It restores a tight seal to help stop drips and maintain proper device operation. What it does

• Creates a watertight or airtight seal between mating parts to prevent leaks.
• Commonly used on valves, fittings, hoses, and service connections.
• Can stop symptoms like slow leaks, puddling under the appliance, or loss of pressure at a connection.
• Small wear, cracking, or flattening of the ring reduces sealing effectiveness.

• Inspect mating surfaces and grooves; clean debris before installing the new O-ring.
• Lightly lubricate with the correct appliance-safe lubricant if specified by the manufacturer.
• Replace any damaged fittings or housings that prevent a proper seal.
• Turn off water/electric supply and relieve pressure before servicing plumbing connections.

This outer door panel replaces a damaged or dented refrigerator door exterior to restore appearance and protect internal components. It fits the door shell and gives your fridge a finished, uniform look. What it does:

• Replaces a cracked, dented or scratched door exterior to improve appearance
• Shields inner door components and insulation from damage and moisture
• Helps maintain a smooth, sealed surface for normal door operation
• Compatible with factory mounting points for a direct-fit replacement

• Recommended: remove all food and disconnect power before starting repair
• Handle panel edges carefully — wear gloves to avoid sharp sheet-metal edges
• Reuse original screws and brackets unless damaged; verify alignment before tightening