Wfw9700vw Parts

Drain hose retainer keeps the appliance's drain hose securely fastened to the cabinet or pump, helping prevent the hose from slipping loose. Replacing a broken retainer reduces leaks and improper draining caused by a detached hose. What it does:

• Secures the drain hose to the cabinet, pump outlet, or drain connection to maintain correct hose positioning.
• Helps prevent water leaks and hose disconnection during drain cycles.
• Common symptoms of a failed retainer: visible hose movement, water at the rear or floor, or intermittent draining issues.
• Replaces worn or broken retainers that no longer hold the hose firmly.

• Always disconnect power and turn off water before servicing the appliance.
• Access may require moving the appliance or removing a rear/access panel to reach the hose retainer.
• Seat the drain hose fully in its proper position, snap or clip the retainer into place, and verify the hose is secure and not kinked.
• Inspect the drain hose for cracks or wear while replacing the retainer; replace the hose if damaged.

This water inlet hose directs incoming water into the appliance for normal operation, providing a reliable pathway that maintains safe, consistent water flow. Use this OEM-fit hose to replace a cracked, leaking, or damaged inlet line. What it does

• Carries incoming water from the home's supply to the appliance's water valve or fill assembly.
• Restores proper filling when an old hose leaks, is split, or becomes deteriorated.
• Helps prevent water damage and maintains normal cycle performance when functioning correctly.
• Compatible with repairs where the original inlet hose is worn, kinked, or blocked.

• One new replacement water inlet hose.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect hose fittings and seals; replace any worn clamps or gaskets for a secure, watertight connection.
• Route the hose without sharp bends or kinks and secure per the appliance's routing clips.

This power cord is the replacement electrical lead that supplies mains power to the appliance, restoring safe, reliable operation when the original cord is damaged or worn. What it does

• Delivers AC power from the wall outlet to the appliance's internal wiring and controls.
• Replaces frayed, cut, melted, or otherwise damaged cords that can cause intermittent power or safety hazards.
• Helps eliminate issues like no power, intermittent power loss, or visible cord insulation damage.
• Restores a secure connection at the appliance strain-relief and terminal block when installed correctly.

• One replacement power cord.

• Always disconnect power at the circuit breaker or unplug the appliance before installing.
• Inspect terminal block and strain-relief; replace any damaged hardware and secure the cord per the appliance wiring diagram.
• Follow the appliance manufacturer's wiring diagram for correct conductor routing and grounding.

This drum baffle (drum lifter) helps lift and separate laundry as the drum turns to promote even tumbling and improved air circulation for better drying. Designed to replace a worn or damaged lifter and restore normal drum action. What it does:

• Lifts and moves clothes during a drying cycle to prevent clumping and improve airflow
• Helps maintain even tumbling to reduce drying times and uneven drying
• Replaces broken, cracked or missing lifters that can cause noise or fabric snags
• Contributes to quieter operation by restoring proper load balance

• One drum baffle (drum lifter)

• Disconnect power (and gas supply if applicable) before starting any repair
• Replacement typically requires access to the dryer cabinet and drum — keep fasteners and clips in a safe place
• Inspect mounting points and surrounding drum for wear; replace any damaged hardware
• Test run the dryer after installation to ensure secure fit and normal operation

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This steamer heater assembly produces the heat needed for a dryer's steam/refresh cycles so clothes receive steam for wrinkle reduction and odor release. Replaces a failed or weak steam heater to restore steam functionality. What it does

• Heats water into steam for the dryer's steam/refresh feature.
• Helps restore steam output when the steam option produces little or no steam.
• Can resolve issues where steam cycles do not start or clothing remains unrefreshed after a steam cycle.
• Works as the thermal element portion of the dryer's steamer system.

• One steamer heater assembly

• Disconnect power to the appliance before beginning any service.
• Handle the heater assembly carefully; avoid bending terminals or stressing mounts.
• Basic mechanical skill and common tools are typically required; for panel removal and wiring diagrams.

This outer door trim ring replaces the decorative and protective bezel around the appliance door, restoring the door's appearance and helping keep inner door components covered. It's a direct-fit exterior cosmetic trim piece. What it does:

• Covers and protects the outer edge of the door assembly from chips, scratches and wear
• Restores the finished look of a cracked, warped or missing door bezel
• Helps keep underlying door parts concealed and reduces dirt buildup along the door edge
• Matches factory fit and appearance for a clean, uniform finish

• One outer door trim ring

• Disconnect power to the appliance before beginning any work
• Remove the door or unsnap existing trim per manufacturer guidance; handle glass and painted surfaces carefully
• Reinstall trim using existing fasteners and alignment tabs; do not force or over-tighten screws
• Replace hardware before finalizing installation

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This electronic control board is the appliance's main circuit board that governs timed cycles, user inputs and power signals so the unit runs correctly. Replacing a failed board restores reliable control of settings and functions. What it does:

• Interprets front-panel commands and runs the appliance's programmed cycles
• Sends power and timing signals to motors, heaters and valves via internal relays
• Monitors sensors and reports errors or fault conditions to the display/control
• Common symptoms of a failing board: unresponsive or blank display, control buttons not working, erratic operation, or appliances that won't start

• One electronic control board

• Disconnect all power before starting work to avoid shock or damage
• Ground yourself to prevent electrostatic discharge (ESD) that can harm the board
• Handle the board by the edges; avoid touching contacts or solder joints
• Follow the appliance service manual for wiring and reassembly

Replacement tension spring for Whirlpool appliances that restores proper tension and smooth movement to moving parts. Use this spring to address issues caused by a weak or broken spring so components operate more reliably. What it does

• Provides tension for moving components to maintain alignment and proper operation
• Helps restore secure closure and prevents sagging or slipping of doors, panels or linkages
• Reduces binding, dragging or uneven motion in hinges and pivot points
• Replaces worn or broken spring to return the mechanism to factory movement

• Disconnect power and shut off fuel before servicing the appliance
• Springs can be under tension — wear eye and hand protection and use the correct tools
• Follow the OEM service manual or parts diagram for correct routing and attachment

This replacement drain hose routes wastewater away from the appliance to the household drain so your unit can empty reliably and avoid standing water. Designed to match the original fit and flow path for easy replacement. What it does:

• Carries waste water from the appliance to the home drain or pump outlet
• Helps prevent water backup, pooling, or slow draining when functioning correctly
• Replaces cracked, split, or deteriorated hose that can cause leaks
• Restores the intended water flow path to reduce the risk of overflow or damage

• Disconnect power and shut off water supply before beginning any repair
• Remove and replace the old hose, using existing clamps or new clamps rated for appliance use
• Route the hose to match the original path; avoid kinks or tight bends that restrict flow
• After installation, restore power/water and run a short cycle to check for leaks