Wfw99550ww00 Parts

Distribution lever replacement that operates the dispenser/linkage inside the appliance, restoring proper mechanical movement and reliable dispenser operation. Use when the original lever is cracked, worn, or no longer moves freely. What it does:

• Replaces the plastic lever that routes motion within the dispenser/distribution assembly.
• Helps the dispenser or internal linkage open and move correctly during cycles.
• Common symptoms: dispenser won't open, linkage binds or hangs, or inconsistent dispensing.
• Works with the existing mounting points and clips in the dispenser assembly.

• Disconnect power (unplug or shut off breaker) and water supply before starting any work.
• Remove the dispenser or access panel to reach the lever; take care with plastic clips and tabs—do not force them.
• Inspect and replace any worn clips, springs, or adjoining parts to ensure proper function.
• Test dispenser operation through a short cycle before reassembling panels.

This rotor is the rotating component of a motor that helps convert electrical energy into mechanical motion for appliance operation. It replaces a worn or damaged rotor to restore smooth motor rotation and reduce abnormal noise. What it does:

• Spins inside the motor to transfer rotational force to the appliance drive system
• Restores proper motor rotation when a rotor is damaged or scored
• Helps reduce grinding, knocking or excessive vibration caused by a bad rotor
• Works with the motor stator, bearings, and shaft to maintain normal operation

• Disconnect power to the appliance before starting any repair
• Rotor replacement often requires partial motor disassembly; handle bearings and shaft surfaces carefully
• Inspect associated bearings, shaft, and motor housing for wear and replace if needed

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

This replacement outer frame restores the appliance's finished appearance and helps keep panels and components aligned for reliable operation. It's the visible trim piece that supports and secures adjacent parts. What it does:

• Provides structural support and cosmetic trim for the appliance front or panel area.
• Helps align and secure doors or access panels to prevent gaps and improper sealing.
• Reduces vibration and rattling by holding panels firmly in place.
• Replaces cracked, bent, or damaged frame pieces that cause misalignment or poor fit.

• Disconnect power to the appliance before starting any repair.
• Use appropriate screwdrivers; keep removed fasteners for reassembly.
• Handle edges carefully — trim pieces may have sharp metal or glass attachments.

This outer tub is the large stationary tub that holds water for the washer and supports the inner wash basket. It restores a watertight enclosure and structural support so your washer can fill, agitate, and drain properly. What it does:

• Forms the watertight basin that contains wash water and directs it to the drain
• Supports the inner tub/basket and helps keep the basket aligned during cycles
• Prevents water from leaking into the cabinet when intact
• A cracked, warped, or corroded outer tub can cause visible leaks, loud or uneven operation, and washer shutdowns

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain remaining water and remove the washer top/lid and control panel as needed to access the tub
• Support or remove the inner tub/basket per service manual instructions to avoid damage during removal
• Inspect and replace related seals, gaskets, and clamps as needed

The Panel-Cntl (white) is an OEM component specifically designed for Whirlpool washing machines. As the control panel, it houses all the buttons, displays, and components that allow for machine operation and cycle selection. 

Causes of a bad control panel can include exposed circuitry due to cracks or breaks in the plastic housing, loose or faulty buttons, or a malfunctioning display. 

Symptoms of a bad control panel include:

• Unresponsive or non-functioning buttons 
• Blank or unintelligible display screen
• Inability to start or change cycles
• Erratic behavior such as random start/stop functions

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

This clamp secures a flexible appliance hose to a fitting to help prevent leaks and keep connections tight. It's a small but essential part that restores a proper seal on water or drain lines. What it does:

• Holds a hose firmly to a tailpiece, barb or connector to reduce leaks and hose slippage
• Helps stop intermittent dripping or pooling caused by loose hose connections
• Restores a proper seal after hose replacement or maintenance
• Works on common appliance water/drain lines where this clamp style is used

• One hose clamp

• Disconnect power and shut off water to the appliance before starting any work
• Allow the appliance and hoses to cool if recently used; use gloves and eye protection
• Use appropriate pliers or a screwdriver (depending on clamp style) to remove and install the clamp; avoid over-tightening
• Inspect the hose and fitting for damage; replace the hose if cracked or worn

This replacement inlet hose routes incoming water to the appliance so it fills and operates correctly. Installing a new hose restores a secure, leak-free connection and helps prevent water damage from cracked or worn lines. What it does

• Carries incoming water from the household supply to the appliance's fill system.
• Replaces cracked, split or kinked hoses that cause visible leaks or pooling.
• Helps stop intermittent or incomplete fill cycles caused by restricted or collapsed hoses.
• Works with existing clamps and fittings when undamaged and correctly seated.

• One replacement inlet hose

• Disconnect power and shut off the water supply before starting; relieve pressure by running a short cycle or opening a nearby valve.
• Inspect and reuse or replace hose clamps and fittings as needed; tighten clamps securely to avoid leaks.
• Route the hose per the appliance's OEM diagram to prevent kinks and interference with moving parts.
• After installation, restore water and power, run a short fill cycle, and check thoroughly for leaks.

Color: White

This stator is the stationary electrical component that works with the rotor to create the magnetic field needed for motor rotation, restoring proper motor function and helping appliances resume normal operation. What it does

• Generates the magnetic field that interacts with the rotor to drive the motor
• Replaces a worn or damaged stator that can cause humming or failure to spin
• Helps eliminate intermittent operation or reduced torque caused by stator faults
• Works as part of the motor assembly to support reliable appliance performance

• One stator assembly

• Disconnect power before servicing to avoid shock or injury
• Installation requires disassembly of the appliance motor housing
• Inspect rotor, bearings, and mounting hardware while replacing the stator

This is a single replacement screw used to secure appliance panels and components. It restores proper fastening to help eliminate looseness and rattling and keep parts aligned for safe operation. What it does:

• Secures trim, panels or internal components to maintain proper alignment
• Prevents rattling or vibration caused by loose fasteners
• Replaces missing or stripped screws for safe, reliable fit
• Works wherever the OEM screw specification and fit match the original

• One screw as shown

• Disconnect power and/or gas before accessing internal components
• Use the proper driver size and avoid over-tightening to prevent thread damage
• Verify correct screw placement against the appliance's service diagram