Wfw99550ww00 Parts

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well. 

This stator is the stationary electrical component of the washer's motor assembly that helps generate the magnetic field needed for rotor movement. Replacing a faulty stator restores proper motor operation and agitation/spin performance. What it does

• Produces the magnetic field the motor's rotor needs to turn.
• Helps enable normal agitation and spin cycles in the washer.
• A worn or damaged stator can cause slow spins, no spin, intermittent motor operation, or unusual noises.
• Works with the rotor and motor control to deliver consistent motor torque.

• Disconnect power to the appliance before beginning repair to avoid electrical shock.
• Replacement typically requires motor housing access and removal of the old stator.
• Inspect rotor, wiring, connectors and motor mounting during replacement; replace any damaged components.

This shield is a protective cover that helps keep internal appliance components safe from heat, debris, and wear. Replacing a damaged shield restores protection to nearby parts and helps prevent further damage. What it does:

• Covers and protects internal components from debris, heat, and contact
• Helps prevent rubbing or chafing on wiring and nearby parts
• Reduces risk of heat-related damage when the original shield is warped or missing
• May stop rattling or vibration caused by a loose or broken shield

• Shield

• Disconnect power (and gas if applicable) before servicing
• Inspect the mounting area for damage or missing fasteners before installing
• Use the correct fasteners and alignment; do not force the shield into place

This rear tub is the OEM replacement outer tub section that supports the wash basket and helps contain water inside the washer cabinet. Replacing a damaged rear tub restores proper drum alignment and helps prevent leaks. What it does:

• Supports the back of the wash basket and provides a mounting surface for the tub seal and bearings
• Helps contain water in the wash chamber to prevent cabinet leaks
• Restores proper drum alignment to reduce rubbing, vibration, and noise
• Addresses symptoms such as visible cracks or holes in the tub, persistent water leaks, or a misaligned/noisy drum

• Disconnect power and water supply before beginning any repair
• Drain the washer and remove the top, front, or rear panels as required for access
• Support the drum and follow the OEM disassembly sequence to avoid damaging seals or bearings
• If seals, bearings, or suspension components show wear, replace them at the same time for best results

This door hinge assembly replaces a worn or damaged refrigerator door hinge to restore proper pivoting and alignment so the door opens and closes smoothly and seals correctly. What it does

• Provides a secure pivot point so the door swings properly.
• Restores correct door alignment to help the gasket seat and reduce air leaks.
• Stops or reduces door sag, sticking, or uneven gaps.
• Helps eliminate grinding or metal-on-metal noise from a failing hinge.

• Disconnect power to the appliance before beginning any repairs.
• Remove door contents and support the door; use two people for heavy doors to avoid injury or damage.
• Retain original mounting hardware unless damaged; torque fasteners snugly and check door alignment after installation.

This electronic control board manages a dryer's cycle selection, timing and user interface so the machine runs the programmed cycles and responds to commands. Replaces a failed main control board to restore reliable cycle control and display feedback. What it does:

• Controls cycle selection, start/stop, and timing functions for the dryer
• Sends signals to the motor, heater and other components to run selected cycles
• Powers and drives the control display and touchpad/console feedback
• Common symptom fix: no display, unresponsive controls, or dryer won't start
• Can resolve error-code-driven behavior when the control board has failed

• One electronic control board (main control)

• Disconnect power before servicing to avoid shock risk
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available
• Match part number and connector orientation; transfer any mounting hardware or harnesses as needed
• If symptoms persist after replacement, wiring and related components (fuse/thermal cutout) are intact

This replacement screw secures appliance panels and trim so components stay properly aligned and vibration is reduced. Use it to replace missing or damaged fasteners and restore a secure fit for safe operation. What it does:

• Fastens control panels, trim pieces, or access panels to the appliance frame
• Prevents panel movement, rattling, or gaps that can form from loose or missing screws
• Restores proper alignment after service or part replacement
• Helps maintain safe, stable operation by keeping panels secured

• Disconnect power (and gas if applicable) before servicing the appliance
• Use the correct driver bit and thread engagement; hand-start threads to avoid cross-threading
• Do not overtighten — snug until secure to avoid stripping or damaging panel threads
• Keep removed hardware organized to ensure correct locations during reassembly