Wfws400sw01 Parts

This hinge is a direct-fit door pivot that supports and guides the appliance door for smooth opening and closing. It restores proper door alignment and helps maintain an even seal for efficient operation. What it does:

• Replaces a worn or damaged door pivot to stop sagging or misalignment
• Restores smooth door movement and reduces binding or catching
• Helps ensure the door seats properly to maintain internal temperature
• Addresses symptoms like a drooping door, uneven gaps, or noisy operation

• One hinge

• Unplug the appliance and shut off water (if applicable) before starting
• Support the door while removing fasteners to prevent dropping or damage
• Compare the old hinge to the new part to confirm orientation before installing
• Tighten mounting screws securely but avoid overtightening; test door operation after installation

This dispenser handle assembly restores proper operation and control of your refrigerator's ice and water dispenser. It replaces a cracked, loose, or broken handle so you can dispense without difficulty and improve the dispenser's appearance. What it does

• Replaces damaged or cracked dispenser handle so the lever engages properly
• Provides a secure grip for activating the ice and water dispenser
• Helps stop wobbling or sticking that prevents consistent dispensing
• Restores alignment and tactile feedback for dispenser operation

• Disconnect power to the refrigerator before starting any work to avoid electrical hazard.
• Remove the old handle by accessing the dispenser trim and fasteners; retain mounting screws if reusing.
• Align the new handle, secure fasteners, and verify the dispenser lever moves freely and dispenses correctly.

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

This replacement control panel restores the appliance's front console so buttons and displays are mounted and protected, helping return full user control and visible status feedback. Designed to match original fit and function for straightforward replacement. What it does:

• Provides the user interface surface that holds push buttons, overlays, and display windows
• Restores readable status indicators and tactile button response when the original panel is cracked, faded, or damaged
• Supports the proper alignment and protection of underlying electronic controls
• Helps resolve symptoms like unresponsive buttons, missing button labels, or cosmetic damage to the console area

• One control panel (front console) as shown

• Disconnect power before starting; follow basic appliance safety procedures
• Minor disassembly of the appliance's front fascia may be required; keep fasteners organized
• Avoid touching electronic boards; handle with care to prevent static or physical damage

The HARNESS WIRE is an OEM part for Whirlpool washing machines. It is a comprehensive wiring harness that connects all electronic control boards and components within the washer. 

Proper connectivity between parts through this harness is essential for running cycles, as it routes signals allowing for functions like temperature regulation, water fill levels, agitation control, and more. 

Causes of a bad harness can include pinched wires, cuts in the insulation, repeated bending in problem areas, or loose connections due to normal movement during operation.

Symptoms of a bad harness wire can include: 

• Error codes are displayed and cycles unable to advance past certain points
• Components like the motor not receiving control signals 
• Lights or displays not functioning correctly
• Intermittent or unreliable operation 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This front panel is the outer trim piece that restores the appliance's appearance and protects internal components from everyday wear. A direct-fit replacement when the original front is cracked, dented, or cosmetically damaged. What it does:

• Replaces the damaged or worn outer front trim to improve the appliance's look
• Protects underlying components and edges from knocks, spills, and general wear
• Helps ensure door alignment and proper sealing when used with intact internal parts
• Addresses visible damage like dents, cracks, chips, or peeling finish

• One front panel

• Disconnect power (unplug or switch off breaker) before starting work
• Remove door or drawer per service instructions to access mounting fasteners; retain all screws and clips
• Handle carefully to avoid scratching the finish; wear gloves if needed

This control panel is the front console assembly that houses the appliance's buttons and display, restoring user input and visible status indicators for normal operation. It replaces a cracked, faded, or unresponsive front console. What it does:

• Provides the tactile buttons and visible display area for selecting cycles and settings
• Restores responsiveness when button presses no longer register or controls feel loose
• Replaces a cracked, warped, or cosmetically damaged console surface
• Helps resolve intermittent or missing display segments when tied to a damaged front panel

• Disconnect power (unplug or switch off breaker) before starting any repair
• Use basic hand tools to remove the upper console and gently unplug wiring harnesses; avoid pulling on wires
• Handle the panel carefully to avoid scratching or cracking the finish and display lens

This tub clamp secures a flexible seal or hose to the appliance's tub, maintaining a tight, leak-resistant connection. Replace a weakened or damaged clamp to stop leaks and keep the tub joint stable during operation.

• Applies even clamping pressure around the tub connection
• Helps prevent water leaks at the tub-to-seal or tub-to-hose joint
• Restores proper fit when the original clamp is stretched, stripped, corroded, or missing
• Common symptoms: water at the base/front, loose seal or hose, visible clamp damage

• Disconnect power and turn off water before service
• Access the tub connection; remove the old clamp and inspect the seal/hose for wear
• Clean mating surfaces; seat the seal evenly, position the clamp, and tighten until snug without pinching the rubber
• Run a quick fill/drain test and check for leaks

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This is a replacement mounting screw used to secure panels and internal components on compatible Whirlpool appliances. It restores proper fastening where the original screw is missing, stripped, or damaged for a safe, snug fit. What it does:

• Secures panels, brackets, or small components to the appliance chassis
• Restores lost or damaged fasteners that cause rattling or looseness
• Helps maintain correct alignment of parts that rely on threaded fastening
• Prevents further wear by replacing stripped or corroded screws

• Use the matching screw length and thread engagement; do not force if resistance is encountered
• Tighten firmly but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow manufacturer safety instructions before servicing
• Consider replacing all matching fasteners for uniform fit

This stator is the stationary motor component that creates the magnetic field needed for the washer's drive motor to operate. It restores motor function so the appliance can agitate and spin normally. What it does:

• Generates the magnetic field that interacts with the rotor to drive the motor.
• Enables proper agitation and spinning when the motor and rotor are functioning.
• Commonly replaced when motor runs poorly, makes unusual noises, or the washer fails to spin.
• Works as part of the motor assembly to maintain consistent motor performance.

• One stator

• Disconnect power and water supply before beginning any repair.
• Access typically requires removing the washer cabinet or motor housing; follow the service manual for your model.
• Inspect the rotor/motor and wiring for damage when replacing the stator.

This oven temperature sensor detects internal oven temperature so the control can regulate heating for accurate cooking. Replacing a failing sensor restores consistent bake and broil performance and helps prevent temperature-related cooking issues. What it does:

• Measures oven cavity temperature and sends a signal to the control board
• Helps the oven maintain set temperature and proper heat cycles
• Failing sensor can cause oven to run too hot, too cool, or not reach set temperature
• Can trigger temperature-related error codes or inconsistent bake results

• Disconnect power to the appliance before attempting any service
• Handle the sensor probe and wiring gently to avoid damage
• Access and removal usually require opening the oven cavity or control panel—refer to the service manual for model-specific instructions

This inner oven door glass provides the clear, heat-resistant window that lets you monitor cooking while helping contain oven heat. Replacing damaged or cracked glass restores visibility and helps maintain safe cooking performance. What it does:

• Forms the inner transparent barrier of the oven door so you can see inside while containing heat
• Helps maintain correct oven temperature by sealing the door assembly
• Replaces cracked, chipped, or shattered inner glass that causes visible damage or heat loss
• Reduces risk of further glass breakage during normal oven use

• One inner oven door glass

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Use gloves and eye protection; handle glass carefully to avoid cuts
• Installation commonly requires removing the oven door and separating the inner and outer panels—follow the OEM service instructions

This genuine mounting screw secures panels and components so assemblies stay aligned and rattle-free. Designed to replace worn or missing fasteners and restore proper fit and function. What it does:

• Secures panels, brackets or trim to prevent movement and vibration
• Restores proper alignment of assemblies that feel loose or shift
• Helps eliminate rattling, squeaks, or parts that fall away during use
• Matches OEM thread and head type for correct fit

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Replace any additional damaged or missing fasteners for best results
• Disconnect power or follow appliance-specific safety steps before working near wiring or energized components

Spring-style hose clamp that secures flexible appliance hoses to fittings, helping keep connections tight to reduce leaks and maintain proper water flow. Use it to replace a worn or damaged clamp and restore a reliable hose seal. What it does:

• Compresses around a flexible hose to lock it onto barbs or fittings
• Helps prevent drips, leaks, and water pooling at hose connections
• Keeps hoses from slipping off during appliance operation
• Useful when a clamp is corroded, stretched, or no longer holds tension

• Disconnect power and shut off water to the appliance before starting any repairs
• Use pliers to compress the clamp for removal and installation; keep hands and face clear when releasing tension
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn