Wfws400sw01 Parts

This transport cover secures internal components during shipping and service to prevent movement and damage. It helps keep parts aligned and reduces noise caused by loose components while the appliance is being moved. What it does:

• Holds internal components in place during transport to prevent shifting or impact damage
• Reduces rattles and vibration caused by unsecured parts
• Protects delicate assemblies from knocks during delivery or handling
• Helps maintain alignment of components until the appliance is installed

• One transport cover

• Disconnect power and water before servicing the appliance
• Remove all shipping brackets and covers per the owner's manual before normal operation
• Use manufacturer-specified fasteners and torque; do not force or modify the part

This rivet secures panels, trim, or small components on compatible Whirlpool appliances to restore proper fit and reduce noise. It's a simple replacement for worn, loose, or missing fasteners so parts stay firmly in place. What it does:

• Holds appliance panels, brackets or trim pieces together for a secure fit
• Stops rattling or vibration caused by loose or missing fasteners
• Restores proper alignment of parts that rely on a permanent fastener
• Provides a durable, low-profile connection where a rivet was originally used

• Turn off and unplug the appliance before working on it to avoid shock or injury
• Remove the damaged rivet by drilling or cutting; install new rivet with the proper rivet tool or replacement method for the original rivet type
• Wear eye protection and follow basic hand-tool safety

This counterweight helps balance and stabilize a refrigerator door so it opens and closes smoothly and stays in the desired position. It replaces a worn or damaged weight to restore proper door operation. What it does:

• Adds counterbalance to a fridge door so it doesn't slam shut or drift open
• Restores even, controlled door movement and alignment
• Helps reduce stress on door hinges and seals
• Commonly replaced when the door feels heavy on one side or won't stay open

• One counterweight

• Disconnect power to the appliance before beginning any repair
• Support the door while removing/installing the counterweight to avoid injury or damage
• Basic hand tools may be required; refer to your service manual for exact steps

This small replacement clip secures panels, trim, or wiring so appliance components stay properly positioned and the unit operates quietly. A simple, low-cost part that prevents loose pieces from shifting or rattling during use. What it does

• Holds trim, panels or harnesses in place to prevent movement and noise
• Keeps wiring or small components secured to reduce wear from vibration
• Helps maintain proper alignment of plastic or metal assemblies
• Commonly used where a simple snap-in retainer is required

• One clip/retainer

• Disconnect power (and water if applicable) before servicing the appliance
• Inspect surrounding parts for damage; replace any cracked or broken mounting features
• Typically installs with pliers or by hand; avoid forcing to prevent breakage

This heater is the heating element assembly that provides the heat needed for electric dryers to dry clothes efficiently. Replaces a worn or failed heater to restore normal drying performance. What it does:

• Generates heat for the dryer drum so wet clothes can dry
• Heats when the dryer calls for heat and shuts off when temperature is reached
• Commonly needed when the dryer runs but clothing stays damp or drying times are very long
• Works with the dryer's thermostat and safety cutouts to prevent overheating

• One heater

• Disconnect power before removing the old heater—this is an electrical component
• Inspect related thermal fuses and thermostats; replace any failed safety parts per manufacturer guidance
• Handle element carefully to avoid bending or damaging the heating coils

This replacement door handle lets you open and close the dishwasher door smoothly and restores a secure grip for loading and unloading. It replaces a cracked, broken, loose or missing handle to make daily use safer and easier. What it does:

• Provides a sturdy grip for opening and closing the dishwasher door
• Replaces handles that are cracked, broken, stripped or missing
• Prevents further damage to the door trim and keeps the door aligned during use
• Restores proper clearance so the door seals and latches correctly

• One replacement door handle

• Basic hand tools typically required;
• Power off and disconnect the appliance if required by your model before beginning
• Handle may attach behind the inner door panel—support the door while removing panels to avoid damage
• Do not overtighten fasteners; inspect surrounding trim and screws for wear during installation

The Console is an OEM part for Whirlpool washing machines. It houses the control panel and electronic components that operate the washer. The console provides an interface for selecting cycles and options while shielding internal mechanisms.

Symptoms of a bad console can include cracks, impact damage, or faulty electronic components like non-responsive buttons. 

 Causes of a bad console include normal wear and tear over time, moisture intrusion leading to corroded electronics, and accidental mishandling.

Symptoms of a bad console include:

• Buttons that do not work or selections that do not register  
• Loose or damaged door or interface paneling
• Error codes or cycling issues due to wire or component damage

Color: White

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness routes power and signal connections between an appliance's controls and components, restoring proper electrical continuity for normal operation. It replaces a damaged or worn harness to help resolve power and control issues. What it does:

• Provides the factory wiring connections between control boards, motors, and sensors
• Restores reliable power and signal paths when wiring is frayed, melted, or broken
• Can stop intermittent operation, failure to start, or control communication errors when caused by wiring faults
• Keeps wires organized and secured to prevent chafing and short circuits

• One complete wire harness as shown

• Disconnect all power (unplug or shut off breaker) before beginning work
• Transfer and align connectors exactly as removed; do not force mismatched plugs
• Route and secure the harness with existing clips or fasteners to avoid contact with hot or moving parts

The Stator is an OEM replacement part for Whirlpool washing machines. It is an essential electrical part that powers the motor and spindle during wash cycles. 

Symptoms of a faulty stator include:

• No spinning or agitation within the wash tub 
• Burning smells coming from the motor area  
• Random failure to start cycles or drain properly
• Buzzing or grinding noises mid-cycle

Causes can involve moisture damage over time compromising electronics. Physical impacts may also crack solder joints or short connections. As a high-use part, the stator endures various motor-based stresses.

This genuine OEM Whirlpool component is also compatible with various washing machine models from Maytag, KitchenAid and Kenmore.

This O-ring is a simple circular seal that prevents water or air leaks where two appliance components meet. It restores a tight seal to help stop drips and maintain proper device operation. What it does

• Creates a watertight or airtight seal between mating parts to prevent leaks.
• Commonly used on valves, fittings, hoses, and service connections.
• Can stop symptoms like slow leaks, puddling under the appliance, or loss of pressure at a connection.
• Small wear, cracking, or flattening of the ring reduces sealing effectiveness.

• Inspect mating surfaces and grooves; clean debris before installing the new O-ring.
• Lightly lubricate with the correct appliance-safe lubricant if specified by the manufacturer.
• Replace any damaged fittings or housings that prevent a proper seal.
• Turn off water/electric supply and relieve pressure before servicing plumbing connections.

This supporting clamp secures hose or component assemblies to help prevent movement and wear. It restores proper routing and restraint so hoses and wiring stay in place during normal operation. What it does:

• Holds hoses, tubes or small wiring bundles in position to reduce rubbing and chafing
• Prevents strain on connections that can cause leaks or intermittent electrical issues
• Keeps components aligned for reliable operation and quieter performance
• Useful when original clamp is cracked, broken, or no longer grips securely

• One supporting clamp

• Inspect mating surfaces and replace any damaged hoses or fasteners before installing
• Use appropriate hand tools; avoid over-tightening which can deform the clamp or hose
• Disconnect power and turn off water supply when working near electrical or plumbing connections

Rubber bumper. Color: Grey.

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame