Wfws400sw01 Parts

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This nozzle directs and focuses water flow inside the dishwasher so dishes get a thorough rinse. Replaces a worn, cracked, or clogged nozzle to restore spray coverage and help prevent poor cleaning performance. What it does

• Channels water from the spray arm or manifold to create a targeted spray pattern
• Helps maintain even water distribution across racks for better cleaning
• Clogs, cracks, or damage can cause weak spray or spotty wash results
• Compatible with systems that use a snap- or press-fit nozzle on the spray assembly

• Disconnect power and water supply before starting any repair
• Remove the spray arm or access panel as needed to reach the nozzle
• Inspect mating surfaces for debris; press or snap the new nozzle into place until seated

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This wire harness assembly connects and routes electrical signals between components, restoring proper power and control function. Replaces a damaged or burned harness to help resolve intermittent or complete loss of electrical operation. What it does

• Provides factory routing and connections for power and control circuits.
• Restores electrical continuity when wires are broken, burned, or shorted.
• Can stop intermittent control failure, lights not working, or non-responsive controls caused by a faulty harness.
• Maintains correct connector fit and insulation to prevent arcing and shorts.

• Disconnect power before inspecting or replacing the harness to avoid shock or damage.
• Carefully note or photograph existing wire routing and connector locations before removal.
• Inspect connectors and mounting points; secure harness with factory clips or equivalent fasteners.
• If any wiring or connector damage extends to devices, repair or replace those components.

This distribution nozzle directs water flow inside the dishwasher to help ensure proper spray coverage and detergent/rinse aid distribution. Replacing a damaged nozzle restores targeted water delivery for better cleaning and drying performance. What it does:

• Directs and shapes spray from the wash assembly for targeted cleaning
• Helps distribute rinse aid/detergent where designed for optimal results
• Prevents leaks or misdirected spray caused by cracks or clogs
• Faulty nozzles can cause poor cleaning, spotting, or uneven wash performance

• Disconnect power and water supply before beginning any repair.
• Inspect surrounding spray arm/assembly for damage or debris before installation.
• Most installs are a snap-fit or secured with simple fasteners; avoid over-tightening.

This front panel assembly replaces a cracked, faded or damaged control panel and restores the appliance's appearance and function. It provides the mounting surface for controls and helps protect internal electronics from everyday wear. What it does:

• Houses and secures the control buttons/knobs and display area
• Protects underlying electronics from dust, spills and impact
• Restores a flush, finished look to the appliance front
• Helps resolve issues where the exterior panel is cracked, warped or cosmetically worn

• Disconnect power to the appliance before attempting any repair.
• Handle the panel carefully to avoid scratching or bending; some fasteners clip into place.
• Some disassembly of the console or trim may be required; keep track of screws and clips.

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

This switch-sensor is a replacement electrical switch assembly that detects and transmits a user or door input to the appliance control, helping restore proper control signaling and machine operation. What it does:

• Acts as an electrical input switch to tell the control when a button, lever, or door is in a specific position
• Helps resolve symptoms like controls that don't respond, intermittent operation, or failure to detect a door/position
• Restores reliable signaling between the user/door mechanism and the appliance control
• Used where a failed switch prevents normal start, selection changes, or safety interlocks from engaging

• One switch-sensor switch assembly

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Access typically requires removing a panel or bezel; handle clips and connectors gently to avoid damage
• Do not force the part into place

This oven door glass replaces a cracked or broken glass panel so the door seals and you can safely see inside while cooking. It restores the oven door's protective barrier and appearance. What it does:

• Replaces damaged or cracked oven door glass to prevent heat loss and sharp edges
• Restores visibility into the oven cavity for safe monitoring of food
• Helps the door maintain proper sealing when paired with intact gaskets and hardware
• Reduces risk of glass shards or injury from a compromised panel

• Handle with care; glass is fragile—use gloves and eye protection during removal and installation
• Disconnect power and allow the oven to cool before working on the door
• Follow the oven manufacturer's instructions for removing the door and fastening the glass
• If door hardware or seals are damaged, inspect and replace them separately

A replacement cross-flow hose that routes water inside the appliance to maintain proper circulation and help prevent leaks. Designed to match the original fit and restore correct water flow where the factory hose is damaged or worn. What it does:

• Carries and directs water between internal components to enable proper circulation
• Replaces cracked, split, or soft hoses that can cause leaks or poor performance
• Helps stop visible water pooling or dripping from the hose area
• Restores factory routing to prevent kinks or flow restrictions

• Disconnect power and turn off water supply before starting any repair
• Inspect hose fittings and clamps; replace clamps if corroded or damaged
• Ensure proper routing and avoid sharp bends or contact with moving parts
• Hand-tighten fittings, then snug clamps; check for leaks before completing repair

Kit Includes Front & Rear Outer Tubs with bearing Plus One Gasket. Bearings not available seperate.

Color: White. Size: 1 qt. can. Acrylic appliance paint.