Wgd8000dw Parts

The Bracket Dryer is an OEM part compatible with Whirlpool dryers. This bracket provides stability and structure by securing the dryer cabinet to the base frame. It is a necessary component that allows for proper mounting and alignment of the dryer. 

Causes of a bad bracket can include cracking, bending, or warping over time and use. Exposure to excessive heat or impact can damage the bracket and compromise its integrity.  

Symptoms of a bad bracket include:

• Vibrating or noisy dryer 
• Loose cabinet that is not firmly mounted
• Difficulty leveling or aligning the dryer
• Stress on other components like doors or panels

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door is an OEM replacement part for Whirlpool electric and gas dryers. Designed to provide controlled access to the drying drum interior, it is also fitted with view glass for visibility into the tumbling load.

Causes of a bad door can be wear and tear of moving components over repeated cycles, damage allowing air leakage, or blockages inhibiting proper operation. 

Symptoms include:

• Loose, sagging, or misaligned door positioning  
• Inability to open or close smoothly
• Air leaks reduce drying efficiency
• Faulty door switches disrupting dryer run times  

This OEM Whirlpool replacement door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brand electric and gas dryers.

The Hinge is an OEM part for Whirlpool electric dryers. Located on the dryer door frame, this heavy-duty metal hinge securely holds the weight of the swinging door panel. It allows for easy opening, closing, and latching of the dryer entrance through thousands of cycles. 

Causes of a faulty hinge can include wear from years of operation putting pressure on the internal bearing as the door is repeatedly swung open and shut. Accidental impacts could also bend or damage hinge components over time.

Symptoms of a bad hinge include:

• Squeaking or grinding noises coming from the hinge area  
• Increased effort needed to open or close the door
• The door sagging when open or not staying still when closed
• Difficulty centering or aligning the door seal 

This Whirlpool dryer hinge is also compatible with brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This bulkhead is the front tub bulkhead that channels water between the dishwasher tub and control/door area, helping maintain proper flow and prevent leaks. It replaces a cracked or warped front bulkhead to restore sealing and alignment. What it does:

• Forms the sealed interface between the tub and door/control area to prevent water leakage
• Directs water flow from the tub toward the drain and pump assembly
• Restores proper fit and alignment when the original bulkhead is cracked, warped, or damaged
• Helps maintain wash performance by preserving the dishwasher's internal water path

• 1 bulkhead assembly (single piece as shown)

• Disconnect power and water supply before starting any repair
• Remove the dishwasher door and inner components as needed to access and replace the bulkhead
• Inspect adjoining gaskets, seals, and mounting hardware; replace any damaged parts to ensure a watertight fit

This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:

• Provides a sealed change of direction for a water, drain, or vent line inside the appliance
• Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
• Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
• Helps eliminate intermittent draining or venting issues caused by a damaged fitting

• Disconnect power and shut off water supply before accessing the part
• Verify orientation and routing before removing the old elbow to ensure correct reinstallation
• Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
• Tighten fittings to secure but avoid over-tightening which can crack plastic components

The Overlay is an OEM replacement part for Whirlpool dryers. It is the interface touchpad between you and your dryer, allowing you to select different drying cycles, adjust temperature settings, and control other functions with a simple touch.

Symptoms of a bad overlay include:

• Unresponsive buttons
• Cracked or damaged overlay
• Errors in cycle selection

A bad control panel overlay touchpad can occur due to regular use, accidental damage, or wear and tear over time. If you notice symptoms such as unresponsive buttons, cracked or damaged overlay, or errors in cycle selection, it may be time to replace the control panel overlay touchpad.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

A replacement mounting screw to secure appliance panels and components so parts stay properly fastened during normal use. Small but essential hardware for stable, rattle-free operation and reliable repairs. What it does:

• Fastens panels, brackets or components to the appliance chassis
• Prevents loose panels, vibration noise, or parts shifting during operation
• Used when original screw is lost, damaged, or stripped
• Restores proper fit and alignment after disassembly for service

• Disconnect power and water before starting any repair
• Use the correct screw type and length; do not force or substitute oversized fasteners
• Tighten until snug—avoid overtightening to prevent stripped threads or cracked parts
• Keep small parts away from children and pets

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement mounting screw secures appliance panels and small components to restore proper fit and reduce movement. It's a simple, direct part for repairing loose panels, trim, or interior assemblies. What it does:

• Fastens panels, brackets, or assemblies to prevent rattling and vibration
• Restores proper alignment for doors, control panels, or trim pieces
• Helps stop intermittent noise caused by loose hardware
• Use when original screw is missing, stripped, or corroded

• Disconnect power and unplug the appliance before beginning any repair
• Use the correct screwdriver bit and hand-tighten; avoid over-torquing which can strip threads
• Keep small parts away from children and pets; magnetic tray helps prevent loss
• If multiple screws are corroded or hardware threads are damaged, inspect mating parts and replace as needed