Wgg745s0fs Parts

Almond. Size: 13 oz. can. Acrylic appliance paint.

The range Cntrl-Elec is an OEM component specifically designed for Whirlpool ranges. This electronic control board is responsible for regulating and monitoring critical operations of the oven such as temperature selection, timer functions, and safety features.  

Causes of a bad control board can include liquid or debris damage to electronic components, failure of wiring connections over time, or issues arising from power surges.

Symptoms of a bad range Cntrl-Elec include: 

• Inoperative or inaccurate temperature selection  
• Timer functions that do not work properly
• Safety locks or cutoff features that do not engage
• Error codes or flashes from diagnostic lights

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore ranges. 

This 8-32 x 3/8 screw secures panels, brackets, and internal components in your appliance so everything stays aligned and tight. Replace worn or missing hardware to restore a solid, rattle-free fit and safe operation.

• Fastens components to frames, brackets, or panels
• Helps reduce vibration, rattling, and misalignment
• Replaces missing, stripped, or corroded screws
• Correct 8-32 machine thread for tapped holes in compatible assemblies

• Disconnect power before servicing; shut off gas or water if applicable
• Start threads by hand to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

Color: White. For black order WP98008545. For biscuit order 98008169.

This broiler pan is the heat-safe tray used for broiling in the oven or broiler drawer. Replace a rusted, warped, or missing pan to maintain safe broiling and simpler cleanup by catching drippings.

• Holds food for broiling and supports correct placement under the broiler
• Collects drippings to help reduce flare-ups and smoke
• Restores safe use when the original pan is rusted, pitted, dented, or warped
• Seats on the designated rails/supports in the broiler drawer or compartment per model design

• Allow the appliance to cool completely; wear cut-resistant gloves
• Remove the broiler drawer or open the broiler compartment as your model requires
• Position the pan on the proper rails/supports and verify stable seating before use
• Follow your model's user guide for broiling setup and care

This is a genuine replacement oven door glass that restores a clear viewing window and helps contain heat in the oven cavity for safe, efficient cooking. It replaces cracked, cloudy, or broken glass so you can monitor food without opening the door. What it does:

• Restores the oven door's viewing window so you can check cooking progress without losing heat
• Helps contain oven heat for consistent cooking and improved efficiency
• Replaces cracked, shattered, or fogged glass that can compromise safety or visibility
• Fits into the oven door assembly and works with the existing door frame and hardware

• One oven door glass panel

• Disconnect power to the appliance before starting any repair
• Handle glass with care; wear cut-resistant gloves and eye protection
• Removal of the oven door or door panel may be required

The Surface Igniter is an OEM replacement part for Whirlpool gas ranges. It is responsible for generating the spark needed to ignite the gas, ensuring a consistent and controlled flame for cooking.

Symptoms of a bad electrode igniter include:

• Burner not igniting
• Weak or intermittent sparks
• Clicking sound without ignition

A faulty or worn-out electrode igniter can occur due to normal wear and tear or accidental damage. If you notice issues such as the burner not igniting, weak or intermittent sparks, or a clicking sound without ignition, it may be time to replace the electrode igniter.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Membrane Switch is an OEM part for Whirlpool ranges. It is a sensory control panel located on the front of the range that allows for tactile selection of cooktop burners and oven functions.

Causes can be cracks or breaks in the silicone rubber overlay, failures in the underlying circuit wiring, or general wear over many years of use.

Symptoms of a defective membrane switch include:

• Unresponsive or intermittent control of burners and oven selections
• Inability to ignite certain gas burners
• Faulty temperature or time displays
• Repeated error codes shown

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM replacement part for Whirlpool ranges. It is responsible for securing various parts of your range together. This screw ensures a tight and secure fit for different components of your range, such as the cooktop, control panel, or oven door. It provides stability and prevents any loose parts.

A bad range screw can occur due to wear and tear, accidental damage, or misplacement. If you notice symptoms such as loose or unstable parts, rattling noises, or difficulty in opening or closing the oven door, it may indicate a faulty or missing range screw.

Symptoms of a bad range screw include:

• Loose or unstable parts
• Rattling noises during operation
• Damaged or missing screw

Repair your range by replacing the faulty or missing range screw with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This left-side oven door hinge secures and supports the oven door, restoring smooth opening, closing and proper alignment. Designed to replace a worn or damaged hinge and help eliminate door sag, rubbing and improper sealing. What it does:

• Supports the oven door at the left hinge point so the door opens and closes smoothly
• Restores correct door alignment to prevent rubbing, gaps, or uneven sealing
• Eliminates sagging or a door that won't stay open or won't latch properly
• Works with the oven's door assembly to maintain safe operation

• Disconnect power to the range before starting and ensure the oven is cool
• Support or remove the oven door per the service manual before removing/installing the hinge
• Keep fasteners and mounting hardware together; torque to OEM specs if available