Wgtlv27hw Parts

The Wire Harness is an OEM part for Whirlpool laundry centers. This wire harness is a component that routes power between electronic control boards and other internal electrical components. It allows power to flow correctly throughout the appliance, helping to operate features like timers, sensors, buttons, and more.

Causes of a bad wire harness include worn insulation, cuts or breaks in wiring, or loose connections due to repeated movement and vibrations over time.

Symptoms of a bad wire harness include:

• Electrical issues such as lights not turning on or functions not working properly
• Error codes appearing on the control board
• Buzzing or humming noises coming from internal components

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This hinge bracket secures a refrigerator door hinge to the cabinet, restoring proper door alignment and support so the door seals and closes reliably. Designed to replace a worn, bent, or broken hinge mounting bracket. What it does:

• Provides a stable mounting point for the door hinge assembly to prevent sagging or drooping
• Restores correct door alignment to improve sealing and reduce cold air loss
• Stops excess movement or rattling at the hinge area
• Helps eliminate door-binding or uneven gaps that keep the door from closing fully

• Unplug the appliance and remove food/items from the door before starting
• Support the door while removing/installing the bracket to avoid damage or injury
• Reuse or replace fasteners as required; tighten securely but avoid over-torquing
• After installation, check door alignment and gasket seal; make minor adjustments as needed

This retaining clip secures appliance panels and small components to keep parts aligned and prevent rattling. Durable and compact, it restores proper fit where clips have broken or worked loose. What it does

• Holds panels, trim pieces or small assemblies in place to prevent vibration and misalignment
• Stops rattling or rubbing caused by loose or missing fasteners
• Keeps wiring harnesses or small components seated
• Works as a direct replacement for a worn or broken clip shown in OEM parts diagrams

• Disconnect power before attempting any repair to avoid shock or injury
• Access may require removing trim or panels; keep fasteners organized for reassembly
• Install by pressing clip into the matching slot until it snaps; verify the secured part is seated
• If clip is damaged or the mating slot is deformed, replace both clip and any damaged mount for reliable fit

This replacement silverware/cutlery basket holds forks, knives and spoons so small items stay organized during dishwashing and drain properly. It restores a dedicated space for utensils and helps keep the rack tidy. What it does:

• Provides a secure compartment for silverware and small kitchen tools during wash cycles
• Keeps utensils separated to improve cleaning and prevent nesting
• Allows water to drain through while holding items in place
• Replaces a broken, cracked or missing utensil basket to restore functionality

• One replacement silverware/cutlery basket

• No special tools required; typically lifts in and out of the rack—align and set into place
• Inspect for broken tabs or clips on the rack that could prevent proper seating
• Disconnect power to the appliance before performing any repairs or heavy manipulation of racks
• If rack mounting hardware is damaged, replace hardware to ensure the basket sits securely

This motor pulley transfers motor power to the appliance's drive system, keeping belts aligned so the drum or transmission turns smoothly. Replacing a worn pulley restores reliable drive performance and reduces noise. What it does:

• Guides and supports the drive belt so the motor can turn the drum or transmission
• Helps maintain proper belt alignment to prevent slipping or wear
• Failsafe against excessive wobble that can cause scraping, squealing, or vibration
• Restores smooth operation when a cracked, warped, or worn pulley causes drive problems

• Disconnect power before inspecting or replacing the pulley to avoid electrical hazard
• Inspect the drive belt and other pulley surfaces; replace worn belts or damaged components
• Use basic hand tools and follow OEM service instructions for removal and reassembly

This replacement cabinet top restores the appliance's upper exterior surface and provides a finished look while protecting internal components from dust and spills. Designed to match the original fit and appearance. What it does:

• Replaces a dented, scratched, or rusted cabinet top to restore the appliance's appearance
• Helps shield internal parts from debris, moisture, and accidental contact
• Restores proper alignment for any controls or trim that mount to the top
• Stops rattles or gaps caused by a damaged or warped top

• Use basic hand tools; support the appliance and disconnect power before starting
• Remove any trim, controls, or mounting screws as required by your model's service guide
• Handle carefully to avoid scratching the finish and to prevent cuts on sharp edges

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.