Whirlpool Adg 954/1 Parts

This front bulkhead assembly provides the washer's front enclosure and tub support while forming a seal to help prevent front-end leaks. It replaces a damaged or corroded bulkhead to restore proper drum alignment and containment. What it does:

• Supports the washer tub and helps keep the drum aligned during operation
• Creates a sealed front enclosure to help prevent water leaking at the front
• Provides mounting for front components and keeps internal parts protected
• Common symptoms corrected: visible front leaks, front-end vibration or rubbing, and damaged/corroded front enclosure

• Disconnect power and water supply before starting work
• Drain the washer tub and remove necessary panels to access the bulkhead
• Handle edges carefully; use appropriate tools and fasteners to reinstall

This switch retainer clip secures a small appliance switch in place so the switch stays aligned and operates correctly. It helps maintain reliable switch contact for normal door or control functions. What it does:

• Holds the door/control switch securely to prevent movement or misalignment
• Helps ensure consistent on/off contact for the related switch
• Can prevent intermittent operation or failure caused by a loose switch
• Small plastic/metal retainer designed for exact OEM fit in the switch assembly

• Disconnect power to the appliance before servicing to avoid electric shock
• Typically installs by snapping or sliding onto the switch or bracket; no special tools usually required
• Inspect surrounding switch and wiring for damage; replace if wiring or switch is compromised

This cycle thermostat regulates temperature during appliance heating cycles to help maintain safe, consistent operation and proper cycle performance. It replaces a worn or failed thermostat to restore correct temperature control. What it does:

• Senses and opens/closes at set temperatures to control heating during cycles
• Prevents continuous heating when the thermostat reaches its limit
• Can cause no-heat, overheating, or short cycling when faulty
• Works with the appliance's control system to maintain cycle timing and safety

• Disconnect power to the appliance before inspecting or replacing the thermostat
• Handle thermostat and terminals carefully; avoid bending sensing elements

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working

This genuine replacement screw secures appliance panels and trim so covers, consoles, and components stay firmly in place for safe, quiet operation. It replaces worn or missing fasteners to restore proper fit and reduce vibration and rattling. What it does:

• Secures control panels, trim pieces, or access panels to the appliance frame
• Keeps panels aligned to prevent gaps and light leaks
• Reduces vibration-related noise from loose panels or components
• Helps maintain safe operation by keeping covers and guards properly attached

• The replacement screw shown/listed

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start the screw by hand to ensure proper thread engagement, then tighten securely but do not overtighten

This bulkhead light assembly replaces the interior service light on commercial laundry machines, restoring illumination for easier loading and maintenance access. It's a direct-fit service kit designed for quick replacement. What it does:

• Replaces a burned-out or flickering bulkhead/service light
• Restores interior visibility for loading, unloading, and troubleshooting
• Replaces a cracked or damaged light housing or lens that lets moisture in
• Helps eliminate unexpected dark or dim compartment lighting

• Disconnect power to the machine before starting any work to avoid shock
• Remove access panels or bulkhead cover per the service manual to reach the light assembly
• Handle the lens and bulb carefully; ensure proper seating and secure fasteners

This front panel replaces a cracked, worn, or damaged control console face to restore the appliance's appearance and protect the control components. It provides a clean mounting surface for the console controls and switches. What it does:

• Covers and protects the control area from spills, dust, and physical damage
• Restores a finished, factory look when the original panel is dented, scratched, or broken
• Helps keep buttons and switches aligned and accessible for normal operation
• Commonly replaced when the panel is cracked, warped, or cosmetically damaged

• Disconnect power to the appliance before starting any work
• Remove the console trim and mounting screws to access and replace the front panel
• Handle panels carefully to avoid scratching or bending during installation
• Reconnect power and verify controls operate correctly after installation

This rear bulkhead assembly provides the rear tub support and a watertight seal to keep washer water contained and flowing correctly. It replaces a damaged or leaking rear housing to stop rear leaks and restore proper tub alignment. What it does:

• Seals the rear of the inner tub to prevent water from leaking at the back of the washer
• Supports and aligns the tub to help maintain smooth spinning and prevent rubbing
• Directs drain and rinse water flow toward the pump and drain path
• Helps reduce water dripping onto the cabinet floor or rear-facing components

• Disconnect power and turn off water supply before beginning any repairs.
• Typical access requires removing the washer top or rear panel; follow the OEM service manual for your model.
• Inspect surrounding gaskets, hoses, and fasteners for wear and replace if needed.
• Ensure the sealing surface and lip are clean and fully engaged during reassembly to prevent leaks.

This access panel assembly covers the washer's service area to protect internal components and give technicians a safe, removable entry point for maintenance. It restores the cabinet's exterior and keeps wiring and parts enclosed. What it does:

• Replaces a missing, dented, or damaged access panel to secure internal components
• Provides a removable service opening for accessing controls, valves, and wiring
• Helps stop debris and lint from reaching internal parts
• Reduces noise and vibration caused by loose or damaged panels
• Restores the appliance's finished appearance and safety

• Disconnect power and water supply before starting any service
• Typical installation requires removal of a few screws; use basic hand tools
• Handle edges carefully; panels can have sharp metal edges

A one-piece rolled exhaust duct that routes dryer exhaust and lint from the appliance to the home vent. Durable sheet-metal construction keeps airflow consistent and helps maintain dryer performance. What it does:

• Channels hot, moist air and lint from the dryer to the external vent
• Prevents exhaust air from leaking into the laundry area
• Helps reduce lint buildup in the cabinet and transition ducting
• Supports proper airflow to improve drying consistency and odor control

• One one-piece rolled exhaust duct

• Disconnect power (and shut off gas supply for gas dryers) before servicing
• Inspect surrounding venting and housing; replace if crushed or heavily corroded
• Secure with the proper clamps or fasteners and maintain an unobstructed, smooth airflow path
• Follow the dryer manufacturer's venting guidelines and local codes

This black control-panel overlay restores the dryer's front console appearance and button labeling so cycle selections are easy to read and use. It replaces a cracked, faded, or peeling overlay for a cleaner, like-new look. What it does:

• Provides labeled touchpoints and control markings so settings are visible and intuitive
• Protects the underlying control board from spills, dirt and everyday wear
• Replaces torn, bubbled or worn overlays that make buttons hard to read
• Improves console appearance and helps prevent accidental button damage

• Turn off and unplug the dryer (or disconnect power at the breaker) before starting
• Remove the console or control assembly screws to access the old overlay
• Peel off the old overlay, clean the surface, align the new overlay, then press firmly to adhere
• Use basic hand tools only; avoid sharp tools that could damage the overlay or console