Whirlpool Adg 954/1 Parts

Felt pad.

Right hand side. For the drum glide and felt pad order LA-1006.

This 10-32 x 3/8 machine screw secures panels and components in many appliances where a small, threaded fastener is required. It replaces stripped, missing, or loose screws to restore stable assembly and reduce vibration. What it does:

• Fastens panels, brackets, and small components using 10-32 unified threads
• Restores secure mounting when screws are missing, stripped, or loose
• Helps stop rattling, misalignment, and intermittent part contact caused by loose fasteners
• Works wherever a 10-32 x 3/8 machine screw is specified by the manufacturer

• Disconnect power or unplug the appliance before servicing
• Use the correct size screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the same size and thread spec to ensure proper fit and function

This dryer timer is the mechanical control that advances and stops the drying cycle. Replacing a failed timer restores accurate cycle timing and dependable start/stop control when the cycle won't advance or runs too long.

• Advances the cycle and provides the OFF position at end of dry
• Routes power to motor/heater circuits as the internal cam turns
• Common symptoms: cycle won't advance or ends too soon; dryer runs until manually turned off; won't start on timed settings; intermittent operation due to worn contacts
• Helps restore consistent, predictable drying performance

• Disconnect power before servicing
• Remove the control panel/back cover to access the timer
• Label or photograph wiring; transfer wires one at a time to the same terminals on the new timer
• Mount the timer, reinstall knob/panel, restore power, and test cycle advance

This LED cylinder light assembly restores bright, reliable illumination inside the drum, making loading and unloading easier. Replacing a failed or flickering light module brings back clear visibility and helps prevent small items from being left behind.

• Illuminates the interior drum/cylinder when the door is opened or during designated cycle stages (varies by model)
• Common fix for no interior light, dim light, or intermittent/flickering light
• 120V LED design provides consistent, dependable lighting
• Connects to the factory wiring harness on applicable units

Includes: One LED cylinder light assembly.

• Disconnect power to the appliance before servicing
• Access the light location; the assembly mounts at the drum/cylinder opening
• Reconnect wiring securely and route away from moving parts; reuse existing mounting hardware if required
• Test light operation before fully reassembling panels

The Output Control Board Assembly is an OEM part for SpeedQueen dryers. It is responsible for controlling various electrical functions during the drying cycle, such as motor operation, temperature monitoring, and timing functions.

Causes of a bad output control board can include component failures due to wear and tear over time, exposure to moisture or excess heat, or shorts in the circuitry from power surges or improper maintenance.

Symptoms of a bad output control board include:

• The dryer not turning on or functioning
• Incorrect or no heat being produced
• Fault codes appearing on the display
• Improper drying times or continuous cycling
• Intermittent operation

The Timer is an OEM part for SpeedQueen dryers. This part controls the various drying time settings and keeps track of the overall cycle duration. The timer signals when to advance through different stages of the drying process.

Causes of a bad timer can include natural component degradation over thousands of operating hours, exposure to moisture or high heat, or impact damage from dropping or other physical shocks.

Symptoms of a bad timer include:

• Inability to select or change drying times
• Premature ending or continuous running of cycles
• Clock, display, or control panel issues
• Dryer failing to advance properly through cycles

A replacement wedge for the door handle that restores a secure grip and smooth door operation. Fits the white trim area of the handle assembly to replace cracked, broken, or worn wedges and improve door feel. What it does:

• Replaces a damaged or missing wedge piece that holds the door handle trim in position.
• Restores a stable gripping surface so the door opens and closes without slipping.
• Helps correct symptoms such as a loose, cracked, or partially detached handle wedge.
• Matches the white finish used on the handle trim for a consistent appearance.

• One white wedge door-handle piece as shown

• Disconnect power to the appliance before starting any repair.
• Installation typically requires basic hand tools; remove the handle/trim to access the wedge.
• Align the wedge and snap or fasten into place without forcing; avoid over-tightening fasteners.

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

A black rocker switch used to control power or function circuits on compatible Speed Queen appliances. Replaces a worn or broken rocker to restore reliable on/off or selection operation and improve user control. What it does:

• Acts as the user-facing actuator that opens and closes electrical contacts when pressed
• Re-establishes circuit connection for affected control functions (power, cycle selection, etc.)
• Common symptom of failure: switch feels stuck, loose, or does not click/respond
• Also replaced when housing or actuator shows visible damage or excessive wear

• One black rocker switch

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Access may require removing the control panel; handle surrounding trim carefully to avoid damage
• Inspect switch mounting and wiring; replace only with matching part to ensure proper fit and function

This is a dryer main control board that is used to manage all of the operations of the appliance, such as temperature and drying time. It allows the user to make changes to the dryer, such as selecting temperatures, dryness, moisture levels, and more. The control board has a variety of small parts and can become damaged. When this occurs, the main control board may no longer work and the dryer may not come on.Several tools, including a small slot screwdriver and a ¼ inch nut wrench are needed to replace this main control board. Make sure the dryer is unplugged and the gas is turned off if appropriate. The dryer will need to be moved away from the wall to take apart the top panel and pull it over the dryer. Note where the wires are before taking the main control board out. The new one can be installed while making sure the wires are placed in the right location.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold individually. The main control board is designed for use with Speed Queen and other brands of dryers.

This valve bracket and pipe assembly secures and routes the washer's inlet valve plumbing, helping restore proper water flow to the tub. Use when the inlet valve mounting or water feed pipe is damaged, loose, or leaking. What it does:

• Holds the water inlet valve in the correct position and secures plumbing connections
• Routes water from the valve to the tub via the attached pipe
• Helps stop leaks and prevents valve movement that can interrupt water fill
• Commonly replaced when brackets are cracked, pipes are bent, or fittings leak

• Turn off electrical power and shut off the water supply before starting any repair
• Use appropriate tools and avoid overtightening plastic fittings to prevent damage

This dryer steam nozzle directs steam into the dryer drum to help remove wrinkles and refresh fabrics. It replaces a worn or damaged nozzle to restore proper steam flow and steaming performance. What it does:

• Channels steam from the boiler/steam supply into the drum for wrinkle-release and fabric refreshing
• Helps ensure steam is delivered where intended instead of leaking or dispersing inefficiently
• Supports normal dryer steam functions when installed correctly

• One dryer steam nozzle

• Install only after disconnecting power and shutting off steam/water supply; follow OEM service instructions
• Inspect surrounding fittings, hoses, and gaskets for wear and replace if needed
• Use appropriate tools and torque; avoid overtightening which can crack plastic or damage threads