Whirlpool Adg 954/1 Parts

This is a dryer main control board that is used to manage all of the operations of the appliance, such as temperature and drying time. It allows the user to make changes to the dryer, such as selecting temperatures, dryness, moisture levels, and more. The control board has a variety of small parts and can become damaged. When this occurs, the main control board may no longer work and the dryer may not come on.Several tools, including a small slot screwdriver and a ¼ inch nut wrench are needed to replace this main control board. Make sure the dryer is unplugged and the gas is turned off if appropriate. The dryer will need to be moved away from the wall to take apart the top panel and pull it over the dryer. Note where the wires are before taking the main control board out. The new one can be installed while making sure the wires are placed in the right location.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold individually. The main control board is designed for use with Speed Queen and other brands of dryers.

This valve bracket and pipe assembly secures and routes the washer's inlet valve plumbing, helping restore proper water flow to the tub. Use when the inlet valve mounting or water feed pipe is damaged, loose, or leaking. What it does:

• Holds the water inlet valve in the correct position and secures plumbing connections
• Routes water from the valve to the tub via the attached pipe
• Helps stop leaks and prevents valve movement that can interrupt water fill
• Commonly replaced when brackets are cracked, pipes are bent, or fittings leak

• Turn off electrical power and shut off the water supply before starting any repair
• Use appropriate tools and avoid overtightening plastic fittings to prevent damage

This dryer steam nozzle directs steam into the dryer drum to help remove wrinkles and refresh fabrics. It replaces a worn or damaged nozzle to restore proper steam flow and steaming performance. What it does:

• Channels steam from the boiler/steam supply into the drum for wrinkle-release and fabric refreshing
• Helps ensure steam is delivered where intended instead of leaking or dispersing inefficiently
• Supports normal dryer steam functions when installed correctly

• One dryer steam nozzle

• Install only after disconnecting power and shutting off steam/water supply; follow OEM service instructions
• Inspect surrounding fittings, hoses, and gaskets for wear and replace if needed
• Use appropriate tools and torque; avoid overtightening which can crack plastic or damage threads

This packaged burner assembly supplies and directs the gas flame needed to heat a gas dryer's drum. Replacing a faulty burner assembly restores reliable ignition and helps the dryer produce consistent, usable heat. What it does:

• Houses the burner tube and pilot/orifice components that create and channel the gas flame
• Ignites and sustains the flame used to heat air flowing through the dryer
• Commonly replaced when the dryer won't heat, the burner won't ignite, or flame is weak/intermittent
• Works with the dryer's safety and control systems to shut off gas if ignition fails

• Turn off and disconnect both the electrical supply and the gas supply before beginning work
• Inspect and replace any gaskets or seals as needed; confirm all gas fittings are tight
• After installation, check for gas leaks and proper ignition; follow local codes and safety practices

A replacement galvanized front bulkhead assembly with light opening that restores the washer's cabinet front and supports the door and control area. Replaces a damaged or corroded front panel to help maintain proper door alignment and cabinet integrity. What it does

• Provides the front cabinet support and mounting surface for the door and related hardware
• Includes the light opening for washer interior/accessory lights or indicators
• Restores proper door seal alignment and front-end rigidity after collision or corrosion damage
• Helps stop water intrusion and reduces vibration caused by a bent or weakened front panel

• One galvanized front bulkhead assembly with light opening

• Panel removal may require disconnecting power and detaching door, trim, and controls
• Disconnect power and shut off water before starting work to avoid shock or injury
• Handle edges carefully — metal panels can have sharp edges; wear gloves and eye protection
• Verify alignment and fastener torque during reassembly; test a short wash cycle to confirm proper operation

This graphic control panel is the dryer's front user interface that displays cycle options and accepts touch/press inputs, restoring clear labeling and control feedback for normal drying functions. It helps make cycle selection intuitive and readable. What it does:

• Displays cycle names, options and status so you can select settings and monitor progress
• Registers user inputs (buttons/touch areas) to send commands to the control board
• Replaces worn, faded or damaged graphics that make controls hard to read
• Can resolve issues where the interface is visually unreadable or buttons provide inconsistent feedback

• Turn off and unplug the dryer before starting any repair to avoid shock or injury
• This panel typically secures to the console; use basic hand tools and keep screws in a safe place
• Handle with care to avoid scratching the printed surface and to protect connector tabs

This control overlay is the labeled top layer that covers a dryer's control console, restoring button legends and a clean, responsive surface for selecting cycles and options. It improves usability and the look of the console. What it does:

• Replaces a faded, torn or worn console overlay so cycle labels and icons are visible again
• Protects the underlying control board and switches from dirt and moisture
• Helps restore tactile button response and accurate press alignment
• Reduces accidental presses caused by damaged or loose overlays

• Disconnect power to the appliance before starting any work.
• Remove the old overlay carefully; clean the console surface of adhesive residue and debris.
• Align the new overlay precisely before pressing into place to avoid misalignment.
• If adhesive or clips are used, follow manufacturer guidance; do not force parts or use solvents that could damage plastics.