Whirlpool Llr6144bw0 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349019
Fixes agitator that won't move or spins slowly. This upper agitator section restores proper wash action when teeth strip or wear. 10-minute repair.
Do-It-Yourself Stories from Customers like You
Washing machine agitator would not engage and wash clothes properly Mike C. • Sterling , MA • March 04, 2016
I replaced the thrust washer , agitator and agitator dog assembly.
The repair took about 10 mins after watching the repair video.
All works fine.
Mike C
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3348552
Fix washer leaks during drain cycle with this pump-to-drain hose. If water pools under your machine when draining, this hose replacement stops the leak.
Do-It-Yourself Stories from Customers like You
Leaking hose from pump to drain Harold C. • Waynesboro , VA • November 23, 2014
Replaced both inlet and outlet side of pump hoses. Removing the machine cover was the most difficult part of the entire project, and it was not hard at all after watching your "How to" videos.
Thanks for excellent service.
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10086010
Secures the motor to its mounting point in your laundry center. Replace if the retainer is worn, broken, or has lost tension to prevent motor misalignment.
Do-It-Yourself Stories from Customers like You
Lost a motor fastener in my washer Carl S. • Sweet Home , OR • October 17, 2019
I bought it here. It came quickly. I took the washer apart and put it in.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516
Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.
Do-It-Yourself Stories from Customers like You
Gearbox replacement Dennis M. • Comer , GA • October 21, 2018
Followed online video. It was easy
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP357213
Push-in nut for washers. Secures components and panels inside the cabinet. Replace if cracked, broken, or missing to restore proper assembly.
Do-It-Yourself Stories from Customers like You
Washer would fill with water and then do nothing else Richard C. • Torrance , CA • December 05, 2015
I saw videos on it possibly being the lid switch. I used 2 lead wires to bypass the lid switch, which indicated it was indeed the lid switch that was faulty.
I ordered the lid switch, which came in 2 days. I installed it in less than 7 minutes.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3356311
Fix a washer that won't agitate or spin due to a faulty lid switch. This mounting screw secures the lid switch assembly. Simple 1-hour DIY repair.
Do-It-Yourself Stories from Customers like You
Water would continue to fill the tub. David J. • Loveland , CO • September 22, 2023
Replaced the water inlet valve.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62889
Fix a burnt or melted lid switch connector causing your washer to be completely dead. This terminal receptacle restores power to the lid switch.
Do-It-Yourself Stories from Customers like You
Washer was "dead" with a partially washed load and would not do anything Jimmy M. • Hopewell , VA • September 19, 2014
Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!)
Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts...
Read more
More
$16.77
- Compare At:
-
$19.79
- You Save:
-
$3.02
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21097
Cushioning pad that installs between the washer lid hinge and cabinet. Replace if cracked, worn, or missing to reduce squeaks and prevent metal wear.
Do-It-Yourself Stories from Customers like You
Cracked lid on a whirlpool cabrio washer Doug P. • Kansas City , MO • September 05, 2015
Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546455
Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.
More
$18.26
- Compare At:
-
$21.73
- You Save:
-
$3.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355454
Replace your washer's anti-rattle clip to eliminate vibration noise and buzzing during cycles. Secures components with light spring tension. Confirm fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
My washer wouldn't go into a spin cycle. Joshua P. • Cohutta , GA • April 18, 2021
I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 280193
Timer knob and dial kit for washers. Includes two knobs and one dial. Replacement for cracked, broken, or missing timer controls on your washer.
Do-It-Yourself Stories from Customers like You
Bad timer Thomas E. • Bear Creek , NC • September 26, 2014
Removed control knob that was broken also. Removed two screws and tilted top panel back.
Removed two screws holding timer in place. Disconnected wiring harness from bad timer.
Reconnected wiring harness to new timer. Used two new screws provided to place timer in position.
Let top panel down and replaced two screws holding it down. Installed new control knob.
Read more
More
$52.32
- Compare At:
-
$62.26
- You Save:
-
$9.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16123
Rubber washer gasket for washer fill hose connections. Replace if worn or leaking at coupler adapter. Measures 1-1/16 x 5/8 inch. Verify fit with model.
Do-It-Yourself Stories from Customers like You
Water inlet valve was corroded and broken washer Sandra H. • Belton , MO • June 26, 2015
Replaced with new part ordered from store
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8538957
Gray control knob for washer console. Replaces worn, cracked, or missing knobs. Fits timer/selector shaft for accurate cycle and setting selection.
Do-It-Yourself Stories from Customers like You
Bad water level switch& control knob. Jimmy A G. • Port Lavaca , TX • March 13, 2017
Removed upper cowling swapped out switch.
Read more
More
$52.33
- Compare At:
-
$61.75
- You Save:
-
$9.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP273556
10-16 x 5/8 inch mounting screw for washers and dryers. Replaces rusty, corroded, or broken screws that secure console panels and internal components.
Do-It-Yourself Stories from Customers like You
Console screws were rusty and the other screw was broken. Denis C. • Baltimore , MD • June 20, 2018
I used a screwdriver and removed all three screws and replaced them with ones I ordered from you. The job took less than ten minutes to complete.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3350830
Fixes broken or worn agitator fins causing poor wash performance. Direct replacement for washer agitator base. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
25 year old washing machine had a stripped agitator worn suspension pads Barry J. • Clarkston , MI • March 24, 2019
Beyond the excellent repair videos, a couple of tips:
1) with the agitator stripped, there is no way to hold the transmission from turning while trying to break loose the agitator screw - defeat the lid switch, set the machine to agitate and work the socket wrench against the motor.
2) the videos call for the use of penetrating oil when trying to free the spanner nut. This won't dissolve the many years worth of laundry detergent. Use vinegar to dissolve the soap first, then use the...
Read more
More
$81.95
- Compare At:
-
$98.29
- You Save:
-
$16.34
Genuine Whirlpool part
By: Whirlpool
Part Number: 285702
21-inch drain hose extension for washers. Extends existing drain hose when original is too short to reach standpipe. Includes clamp for secure fit.
Do-It-Yourself Stories from Customers like You
Drain hose too short and home depot fix leaked Sara B. • Liberty Hill , TX • August 21, 2015
Ordered a new drain hose and extension part. The prices including shipping were more reasonable than driving back and forth to the store just to piece meal parts together. Very frustrating. I ordered the parts that were specific to our washing machine, it took maybe 5 minutes to install, and everything fit perfectly.
Now we're washing again and no leaks!
Read more
More