Whirlpool Speed Automatic Parts

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Seal is an OEM part for Bosch dishwashers. This part is responsible for creating a watertight seal around the dishwasher door, keeping water contained within the dishwasher and preventing it from leaking onto the floor.

A bad door seal can occur due to wear and tear, exposure to heat and chemicals, or accidental damage. Signs of a faulty door seal include visible cracks, tears, or a loose fit around the dishwasher door.

Symptoms of a bad door seal include:

• Water leaking from the dishwasher door  
• Wet or damp areas around the dishwasher 
• Inefficient cleaning or rinsing 

Replace your worn-out or damaged dishwasher door seal with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.

This genuine replacement seal provides a watertight connection where components join, helping prevent leaks and maintain normal appliance performance. Use when an old or damaged seal allows water to escape or pooling occurs. What it does:

• Creates a tight seal between mating parts to stop water leaks
• Restores proper sealing at appliance joints or hose connections
• Helps prevent water damage and reduces the chance of intermittent leaks
• Commonly replaced when a seal is cracked, flattened, or missing

• Turn off power and water supply before replacing the seal.
• Clean and dry mating surfaces thoroughly before installing the new seal.
• Ensure correct orientation and proper seating so the seal sits evenly in the groove.
• Inspect adjoining parts for wear; replace damaged components to ensure a proper seal.

The Insulating Plate is an OEM part for Bosch dishwashers. It serves as a protective barrier, dampens sound and helps to maintain temperature during the wash cycle. The insulating cover is responsible for reducing heat loss and reducing noise from the dishwasher.  

A bad insulating plate can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty cover include visible cracks, warping, or deterioration of the insulation material.

Symptoms of a bad insulating plate include:

• Heat loss during the wash cycle 
• Louder than normal during operation
• Damage to the insulation

Replace your damaged or worn-out insulating plate with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Adapter is an OEM part for Bosch dishwashers. It is used to connect the dishwasher water inlet hose to the internal water supply component. Proper sealing and connections are critical for leak-free dishwasher operation.

Causes of a bad hose adapter can include mineral buildup interfering with the seal, cracks developing from repeated heating and cooling cycles, or accidental damage during hose handling.

Symptoms of a bad hose adapter include:

• Water leaks at the hose connection point
• Mineral deposits or residue left around the area
• Reduced water pressure or flow to internal components
• Inability to establish a tight seal when connecting the hose

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement dishwasher door handle restores a secure, easy-to-grip place to open and close the door, improving usability and appearance. Designed to match the original fit and mounting style for straightforward swap-out. What it does:

• Replaces a cracked, bent, or missing door handle so the door can be opened and closed safely
• Provides a solid grip to prevent slips and reduce stress on the door panel
• Restores factory appearance when the original handle is damaged or worn
• Helps prevent further cabinet or door edge damage from makeshift grips

• Disconnect power to the appliance before starting any repair to avoid injury
• Many installations require removing the inner door panel to access mounting screws; keep hardware organized
• Use basic hand tools (screwdriver, nut driver) and avoid overtightening fasteners to prevent damage

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

This panel base is the lower front support piece that stabilizes and finishes the appliance's front panel, restoring proper alignment and a clean appearance. It helps keep the front panel secure and protects internal components from debris. What it does:

• Provides structural support for the appliance's lower front panel to prevent sagging or misalignment
• Helps maintain a sealed fit between the cabinet and appliance front to reduce dirt and moisture entry
• Restores proper panel attachment points so the front trim sits flush
• Reduces rattling or vibration caused by a loose lower panel

• Basic removal of the lower front panel or kick plate is typically required to access and replace this part
• Use appropriate hand tools; avoid forcing clips or fasteners to prevent breakage
• Disconnect power to the appliance before working in areas with electrical components
• Replace damaged fasteners or mounting clips to ensure a secure fit

This fixing kit provides the mounting hardware needed to secure or reposition appliance panels and components, restoring proper fit and reducing rattles or movement. It's a compact set meant for specific Bosch appliance repair tasks. What it does:

• Provides the screws, clips, and/or brackets used to mount panels or components securely
• Helps stop panel vibration, rattling, or misalignment caused by loose fasteners
• Restores proper fit for access panels, trim pieces, or internal brackets
• Useful when replacing panels or refurbishing assembly points that rely on factory fasteners

• Installation requires basic hand tools; follow for correct fastener locations
• Turn off and unplug the appliance before starting any repair to avoid electric shock
• Handle sheet metal and sharp edges with care; wear gloves and eye protection as needed

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This operating module is the dishwasher's electronic control board that runs the user interface and manages wash cycles, displays, and touch/selection inputs for reliable cleaning performance. What it does:

• Controls cycle selection, start/pause, and display indicators
• Communicates with sensors and valves to sequence wash, drain, and dry functions
• Restores responsive touch/buttons and correct cycle reporting when a failed control causes no power or unresponsive controls
• Helps resolve intermittent errors, blank displays, or failure to start tied to the main user/control electronics

• Disconnect power at the breaker before inspecting or replacing the module
• Access typically requires removing the control panel; keep screws and panels organized
• Handle the board by edges and avoid static discharge; do not touch electronic contacts