Whirlpool Wrs973cidm Side Side Parts

Replacement crisper pan that supports the refrigerator crisper drawer and helps contain spills and condensation for easier cleanup. Restores a stable base so drawers slide correctly and keeps the produce area tidy. What it does:

• Provides a flat, supportive surface for the crisper drawer and its contents.
• Catches leaks, drips and food spills to protect the refrigerator interior.
• Replaces cracked, warped or missing pans that can cause leaks or drawer misalignment.
• Helps make cleanup simple — remove, wipe, and reinstall.

• Disconnect power or unplug the refrigerator before servicing to reduce electrical and injury risk.
• Remove produce and slide out or remove the crisper drawer per your owner's manual.
• Lift out the old pan and set the replacement pan into the cavity, ensuring it seats flat and the drawer operates smoothly.
• Clean the area and the new pan with mild detergent; dry thoroughly before reinstalling.

The Wire Harness is an OEM part for Whirlpool refrigerators. It is made up of bundled electrical wires that connect and transmit signals between different refrigerator components like lights, temperature controls, fans, and more.

Causes of a bad wire harness include short circuits due to damaged insulation, loose or disconnected wires, or wires breaking due to normal wear and tear over time.

Symptoms of a bad wire harness include:

• Lights or temperature displays not working properly
• Fans or other mechanical parts failing to run 
• Strange electrical smells or sounds coming from the refrigerator
• Components like icemakers or water dispensers malfunctioning

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Electronic control board that manages the oven or range's user interface and cooking controls — restores the display, touchpad response, and timed cooking functions when the original board fails. What it does:

• Regulates the front console display and touchpad input so oven settings and timers respond correctly.
• Controls programmed cooking cycles, bake/broil functions and timed operations.
• Faulty boards can cause a blank or flickering display, unresponsive buttons, incorrect cycle behavior, or error codes.
• Replacing the board often resolves control-related failures while leaving other components intact.

• Always disconnect power at the breaker or unplug the appliance before accessing the control console.
• Ground yourself and handle the board by its edges to avoid electrostatic damage.
• Label or photograph connector locations before removal; reconnect each harness to the matching connector.

This refrigerator meat pan is the slide-out deli drawer that stores and organizes meats and cheeses in the fresh food compartment. Replace a cracked or missing pan to restore smooth operation and a tidy, easy-access storage area.

• Provides a dedicated drawer for deli items in the fresh food section
• Slides on shelf tracks to keep items organized and accessible
• Restores use when the original pan is cracked, warped, or missing
• Common symptoms: broken tabs, pan falls off tracks, hard-to-slide or jammed drawer

• Remove food from the area; take off any shelf or cover above the pan if required
• Pull the old drawer straight out; inspect and clean the tracks
• Align the new pan with both tracks and slide it fully into place
• Handle plastic and any nearby glass carefully; do not force parts

This replacement freezer bin restores a sturdy, properly fitting storage bin in your freezer compartment. Swap out a cracked or missing bin to keep frozen foods organized and contained so shelves or drawers operate smoothly.

• Provides dedicated storage space inside the freezer compartment
• Seats on the designated supports/rails for a secure fit
• Replacing a damaged bin can resolve issues like cracks, broken tabs, falling out, or poor sliding/fit
• Helps maintain orderly food storage and prevents items from spilling into the compartment

• Empty the old bin, then lift and pull it out of the compartment or off its supports
• Align the new bin with the rails or ledges and press/slide into place until fully seated
• Allow plastic parts to reach room temperature before installation to reduce the risk of stress cracking
• Follow your model's owner's manual for bin placement and any model-specific steps

This replacement freezer bin restores sturdy, organized storage in the freezer compartment. Use it to replace a cracked, warped, or missing bin so frozen items stay contained and the drawer or compartment functions as intended.

• Holds and organizes frozen foods within the freezer compartment
• Seats into the designated tracks/pegs to stay securely in place
• Replaces bins that are cracked, broken, or missing
• Common signs it's needed: broken tabs or cracks, bin won't stay seated, wobbling/sagging, items spilling into the compartment

• For safety, disconnect power if working near moving parts or wiring; wear cut-resistant gloves
• Empty the old bin, then lift it up and out of its tracks or mounting tabs
• Align the new bin with the same tracks/tabs and press down to fully seat it
• Do not force; recheck orientation if it doesn't seat smoothly

The DRAIN TUBE is an OEM part specifically engineered for Whirlpool refrigerators. This essential component plays a crucial role in efficiently removing excess water or condensation from the refrigerator. Its precise design and compatibility ensure proper fitting and functionality within the appliance, preventing moisture buildup and potential water damage.

A damaged or clogged drain tube can result in issues related to excess moisture within the refrigerator. Causes of a malfunctioning drain tube might include blockages due to debris accumulation, physical damage, or wear and tear over time, leading to inadequate drainage or water pooling.

Symptoms of a faulty DRAIN TUBE may include:

• Water pooling or leakage inside the refrigerator
• Excessive condensation or moisture buildup
• Inadequate drainage resulting in water accumulation in the refrigerator

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

This water connector is an inlet fitting that connects the household water line to the appliance, providing a secure path for water to reach the valve, dispenser or ice system. It helps maintain proper water flow and prevents leaks when installed correctly. What it does:

• Connects the incoming water supply to the appliance's inlet valve or ice/dispenser plumbing
• Provides a sealed transition between supply tubing and appliance fittings
• Restores normal water flow for ice makers and dispensers when damaged or corroded
• Can prevent dripping or pooling from a failing or broken connector

• Turn off the appliance power and shut off the house water supply before replacing
• Inspect and replace any worn tubing, O-rings, or clamps for a proper seal
• Hand-start threads to avoid cross-threading, then snug with a wrench—do not overtighten
• After installation, restore water and power and check all connections carefully for leaks

The Support Bracket is an OEM part for Whirlpool refrigerators. It is an integral structural component that provides support for internal refrigerator shelves and bins. 

Causes of a bad support bracket can include cracks or fractures from long-term use and vibration, broken mounting points no longer firmly attaching it to the wall, or deformation preventing shelves from sitting correctly.

Symptoms of a bad support bracket include:

• Sagging or collapsed refrigerator shelves  
• Items falling off shelves or bins frequently
• Difficulty removing or replacing shelves smoothly

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bracket is an OEM part for Whirlpool-brand refrigerators. These brackets are mounted internally to provide secure anchoring points for door assemblies on the refrigerator frame.

Causes of a bad bracket can include cracks from over-tightening during installation, or metal fatigue over many open/close cycles.

Symptoms of a bad bracket include:  

• Loose or sagging refrigerator doors that do not close flush  
• Gaps appearing around door seals
• Noises or vibrations emitting from door areas
• Doors difficult to open/close smoothly

As a core mounting component, brackets ensure doors remain firmly and safely attached year after year of use. Replacing a damaged bracket with this OEM part restores a proper secure fit. Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This is a replacement 8-18 threaded screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fastening where a missing or damaged screw causes loose parts or vibration. What it does

• Fastens panels, brackets, and small assemblies to the appliance frame
• Replaces stripped, corroded, or missing screws that cause rattling or loose components
• Helps maintain proper alignment of panels and controls for safer operation
• Suitable where an 8-18 threaded machine screw is specified by the manufacturer

• One replacement screw

• Disconnect power to the appliance before service to prevent shock or injury
• Use the correct driver to avoid stripping the screw head; do not force mismatched tools
• Tighten until snug — avoid over-tightening which can strip threads or crack plastic
• If replacing multiple fasteners, check mating threads and replace any damaged clips or anchors as needed

This front cover is the outer cabinet panel that restores the dryer/washer front appearance and protects internal components from dust and accidental contact. It provides a clean, finished look and helps maintain appliance safety. What it does:

• Replaces a cracked, dented, or faded front panel to restore the appliance's appearance
• Protects internal components and control area from dust, lint, and moisture
• Helps ensure proper alignment of doors/controls by maintaining the front cabinet structure
• Addresses symptoms like visible damage, gaps at the door, or increased debris buildup

• One front cover panel

• Verify power is disconnected before beginning any repair
• Removal typically requires access to the cabinet and basic hand tools; follow OEM instructions
• Handle carefully to avoid scratching the finish and to prevent contact with sharp edges
• If clips or screws are damaged, replace them with OEM-approved fasteners

This motor grommet cushions and secures the appliance motor to the cabinet, helping reduce vibration and noise for smoother operation. It's a direct-fit rubber mounting grommet used where the motor meets the frame. What it does:

• Absorbs motor vibration to reduce noise and movement
• Protects the motor mounting studs and surrounding sheet metal from wear
• Helps maintain proper motor alignment for reliable operation
• Commonly replaced when rubber is cracked, torn, or deteriorated

• Disconnect power before beginning any service.
• Access and remove the motor mounting hardware or panel to reach the old grommet.
• Replace with the new grommet, ensuring it is fully seated on the motor stud and in the mounting hole.
• Reinstall hardware, restore panels, and test the appliance for secure, quiet operation.