Wjre550h1ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Funnel Shower Head

5.0 (8)

By: Ge

Part Number: WH41X10206

Do-It-Yourself Stories from Customers like You Leak while filling tub Norman T. • Osprey , FL • February 19, 2021

Replaced the filler funnel, the hose between the water valve and the filler funnel split. Read more

Genuine Ge part

Drain Hose

4.9 (9)

By: Ge

Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

Water leaking from the back or underside of the washing machine
Pools of water around the area where the washing machine is installed
Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

Genuine Ge part

Dispenser Asm Fs

4.7 (6)

By: Ge

Part Number: WH43X10039

Do-It-Yourself Stories from Customers like You Needed to replace the cup part of the dispenser because the plastic tabs that hold it were broken Evelena S. • Rome , NY • December 21, 2015

Placed in new dispenser Read more

Genuine Ge part

Cord Power Asm

By: Ge

Part Number: WH19X10068

Genuine Ge part

Hose & Water Inlet

5.0 (3)

By: Ge

Part Number: WH41X10078

Do-It-Yourself Stories from Customers like You Water was leaking from the washer onto the floor. Richard A. • Lancaster , CA • May 22, 2021

Replaced the water inlet spout which was cracked and spraying water outside of the drum. Read more

Genuine Ge part

Magnet Housing Asm

5.0 (3)

By: Ge

Part Number: WH01X10222

Do-It-Yourself Stories from Customers like You Intermittent no spin. The rubber tub isolators broke. Michael M. • Baldwinsville , NY • July 18, 2023

I removed and inspected the lid magnet. It had a 1/8" layer of corrosion. I removed the layer of corrosion and reinstalled the part. the symptom improved. That was a stop-gap repair until the new lid magnet arrived. The broken rubber isolators were discovered when I removed the top of the washing machine. Read more

Genuine Ge part

Wireform Hinge (Long)

By: Ge

Part Number: WH1X2743

Genuine Ge part

Clamp Tub Outlet

By: Ge

Part Number: WH01X10134

Genuine Ge part

Switch Pressure

5.0 (1)

By: Ge

Part Number: WH12X10322

Do-It-Yourself Stories from Customers like You Washer wouldn't agitate or drain. Darrell M. • Grand Prairie , TX • October 27, 2019

I ordered the motor, and followed the instructions. Splicing the included wire and taking out the fuse. Washer works fine now. I didn't have the installation tool, but I used a socket that fit over the bottom of the motor shaft and put the belt on. Read more

Genuine Ge part

Terminal Housing

By: Ge

Part Number: WH12X497

Harness to corset & shifter

Genuine Ge part

Self Locking Strain Relf

By: Ge

Part Number: WH12X10208

Genuine Ge part

Probe Sensor Atc

5.0 (1)

By: Ge

Part Number: WH12X10251

Do-It-Yourself Stories from Customers like You No hot water after 10 seconds. Ralph G. • Oxford , OH • January 25, 2018

Ordered water inlet solinoid valve and water temperature probe sensor. Items arrived in a few days. Appliance Parts Pros on-line video was extremely helpful for replacing inlet valve. It only took 20 minutes. Recommend replacing temp. sensor probe while old valve is out before mounting new valve. Only 2 screws-Easy. Entire job took about an hour start to finish. Saved at least $150 doing it myself over repairman and saved $750 over replacing the washer. Happy wife, happy life! Read more

Genuine Ge part

Probe Sensor Atc

5.0 (1)

By: Ge

Part Number: WH12X10411

Do-It-Yourself Stories from Customers like You Leaking washing machine Robert P. • Beech Grove , IN • November 11, 2018

Took front panel off, added water to tub, then drained to see if pump or hoses were leaking. They were not but still saw water on floor but couldn't tell where it came from, so took top panel off and noticed corrosion on the metal mounting plate near inlet valve and sprayer head and sensor, soI bought those 3 parts, 45 mins later it was done with no leaks. $58 is a lot better than $450 for a new one! Saved myself $300 to $400 Read more