Wkg365bbq Parts

This is the refrigerator main control board that manages power distribution and user-interface functions so the appliance runs and responds to controls. Replaces a failed control board to restore normal electronic operation. What it does:

• Controls power to compressor, fans and valves and coordinates timed cycles
• Processes inputs from the user interface and sensors to run the fridge's functions
• Can cause loss of power, unresponsive controls or display, or intermittent cycling when failing
• May trigger error codes or prevent cooling if the board is damaged

• Disconnect power before starting; verify mains are off to avoid shock
• Handle the board by edges and avoid static discharge; use an ESD strap if available
• Reconnect all wiring and harnesses exactly as removed; do not force connectors

This bolt assembly secures the appliance drum or tub to its mounting, restoring proper alignment and helping reduce noise, wobble and vibration caused by a loose or damaged fastener. What it does:

• Fastens the drum/tub to the suspension, shaft or mounting bracket to keep the assembly stable
• Replaces a worn, bent or broken bolt that can allow rubbing, knocking or excessive vibration
• Helps stop intermittent banging or misalignment caused by a loose or missing fastener
• Use only if the part matches your appliance's parts diagram and service manual

• Disconnect power (and water for washers) before beginning any repair
• Access and removal steps vary by model — follow the OEM service manual or exploded parts diagram
• Use correct tools and torque; do not overtighten or modify the bolt
• Inspect nearby mounts, bushings and suspension components for wear while replacing the bolt

The Motor Bracket is an OEM part for LG dryers. This bracket securely holds the dryer motor in place. It maintains proper alignment and spacing of the motor to allow for smooth operation of the tumble cycle.

Causes of a bad motor bracket can include cracks or breaks developed over time from repeated use and vibration, or damage due to impact or improper installation.

Symptoms of a bad motor bracket include:

• Excessive noise or grinding sounds emanating from the motor area
• The dryer not rotating or tumbling clothes properly
• Increased movement or shaking of the motor
• Poor airflow and inefficient drying performance

This OEM LG part is also compatible with some Kenmore models.

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

This Pipe Assembly routes water into the appliance so the dispenser and ice maker can receive a steady supply. Replacing a damaged tube restores proper water flow and helps stop leaks or pooling inside or beneath the unit. What it does:

• Carries incoming water from the household supply to the appliance's internal water system
• Restores water delivery to the dispenser and ice maker when the original tube is cracked or blocked
• Prevents leaks and water damage caused by split, corroded, or pinched tubing
• Helps eliminate intermittent flow or weak dispenser output caused by a damaged water line

• One complete pipe assembly as shown

• Shut off the refrigerator's water supply and unplug the appliance before beginning
• Handle tubing fittings carefully; use proper tools to avoid damage or overtightening
• Inspect connection points and replace seals or clips if worn; test for leaks after reinstalling

This main PCB power control board assembly manages the appliance's electrical power and control signals to operate cycles and user-interface functions. Replacing a faulty board restores reliable control and corrects power-related failures. What it does:

• Regulates and distributes power to motors, valves, and electronics to enable normal appliance operation
• Interprets user commands and runs timed cycles via control logic
• Common symptoms of failure: no power or unresponsive controls, erratic or stopped cycles, intermittent operation, or display/control board errors
• Replaces a damaged or failed main control PCB to resolve control and power-related issues

• Disconnect power and/or unplug the appliance before attempting service to avoid shock risk
• Handle the board carefully and avoid touching components or connectors; use anti-static precautions if available
• Verify the appliance model and part number match before installing—do not rely on visual similarity alone

This hinge bracket secures a refrigerator door hinge assembly to the cabinet, restoring proper door alignment and smooth opening. Replace a damaged or bent bracket to stop sagging, binding, or uneven door gaps. What it does:

• Supports the door hinge, maintaining correct door alignment and seal
• Prevents door sag that can cause gaps, poor cooling, or uneven wear
• Helps stop binding or noisy door operation caused by a cracked or bent bracket
• Works as the mounting point between the hinge and cabinet/frame

• One hinge bracket

• Disconnect power and empty the door before removing hinge components to avoid injury or damage
• Loosen or remove hinge fasteners, support the door while swapping the bracket, then retighten fasteners to secure alignment
• Check door alignment and gasket seal after installation; adjust hinge position as needed
• Use appropriate tools and follow safety precautions; for complex repairs

This connector nozzle is a small replacement plumbing/airflow fitting that restores a secure, directed connection between hoses or tubing in compatible LG appliances. It helps stop leaks and keeps fluid or airflow routed where it belongs. What it does

• Provides a sealed connection point for a hose or tube to the appliance
• Directs fluid or air flow through the intended channel to prevent leaks or misrouting
• Replaces worn, cracked, or damaged nozzles that cause dripping or reduced performance
• Fits into the appliance's existing plumbing or tubing coupling to restore proper operation

• One connector nozzle

• Turn off power to the appliance before beginning work
• Shut off the water supply and relieve any pressure if the nozzle is part of a water line
• Remove only the damaged nozzle and install the replacement by seating it fully and securing clamps or fittings as originally installed
• If you notice persistent leaks after installation, recheck hose seating and clamps.

The Pump Assembly is an OEM part for LG washing machines. It plays an important role in moving water into and out of the washer tub during operation cycles. 

Causes of pump assembly failure generally stem from normal wear and tear on internal components over time. Mineral buildup from hard water or sediment can also clog critical areas.

Symptoms of a bad pump assembly include:

• Incomplete or slow filling/draining of water 
• Strange noises emanating from within the washer tub
• Error codes related to water level or drainage issues
• Reduced washing or rinsing performance

This LG OEM replacement part is also compatible with some Kenmore models. 

The Stator Assembly is an OEM part for LG washing machines. The stator assembly acts as the stationary component of the motor that drives the wash drum and basket. It converts alternating current into mechanical motion through electromagnetic induction, working together with the rotor to power the motor.

Causes of a bad stator assembly can include defects in the windings, bearing wear, or damage due to excessive heat.

Symptoms of a bad stator assembly include:

• The motor failing to start or run
• Abnormal noises coming from the transmission
• Vibration or shaking issues
• Inability to advance cycles

This OEM LG part is also compatible with some Kenmore models.

Locker hook secures the appliance door or access panel so it stays closed during operation. Replacing a worn or broken hook restores reliable latching and prevents the door from popping open or causing noise. What it does:

• Engages with the catch or striker to hold the door/panel closed during cycles.
• Restores proper door latching and alignment for normal operation.
• Common symptoms: door won't stay closed, rattling or intermittent latching, or door popping open.
• Small replacement part used in the latch area of the cabinet or door assembly.

• Always disconnect power (and water if applicable) before servicing the appliance.
• Access the latch area by opening or removing the door/access panel per the service manual.
• Remove and save any fasteners or clips; install the new hook in the same orientation and secure all fasteners.

The Water Valve is an OEM part for LG dryers. This valve controls the water supply to the dryer's steam setting which helps reduce wrinkles and refresh clothing.

Causes of failure can be mineral buildup overtime restricting flow, damage from freezing during winter months, or worn internal seals and mechanisms.

Symptoms of a bad water valve include:

• Inability to select or utilize the steam cycle
• Drips or leaks at the water inlet port
• Erratic water pressure during steam cycles
• Steam levels that fluctuate or cut off unexpectedly

This OEM LG part is also compatible with some Kenmore models.

The Drain Hose Assembly is an OEM replacement part for LG washing machines. It is the hose directly responsible for draining water from the washer tub and out of the home during and after each cycle. 

Symptoms of a bad drain hose assembly include:

• Puddling, pooling, or slowly draining water inside the washer tub  
• Water not fully draining or machine not fully emptying after cycles
• Leaks or drips from hose connections or along its length
• Deterioration, cracking, or splits in the hose material

Causes can be regular wear and tear over extended use, mineral or sediment buildup, cracking from drying out, or accidental damage.

This OEM LG drain hose assembly is also compatible with some Kenmore washer models. 

This is a replacement door hinge that restores proper alignment and secure movement for a fridge or freezer door. It helps the door open and close smoothly and maintain a tight seal to preserve temperature control. What it does:

• Provides a stable pivot point so the door opens and closes correctly
• Restores proper door alignment to prevent rubbing or sagging
• Helps the door seal fully to reduce cooling loss and improve efficiency
• Replaces a worn, bent, or broken hinge that causes noise or uneven movement

• One hinge

• Unplug the appliance or shut off power before starting any repair
• Support the door securely (use a helper or prop) before removing the hinge fasteners
• Use the correct fasteners and torque to avoid stripping threads or misalignment

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.