Wkg365bbq Parts

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

A manufacturer-configured replacement component designed to restore the appliance's original factory settings and functions. Use this part when a model-specific, pre-configured module is required to return correct operation. What it does:

• Provides the factory-specific configuration and setup programmed by the manufacturer
• Restores functions controlled by the module when configuration or programming is corrupted
• Resolves symptoms such as appliance not starting, control panel unresponsive, or intermittent/erratic operation linked to configuration errors
• Ensures compatibility with model-specific features when the appliance requires a pre-configured assembly

• Disconnect power to the appliance before starting any work
• Handle electronics carefully; observe electrostatic discharge (ESD) precautions for circuit boards or modules
• Match connectors and mounting locations to the original part; do not force connectors

This wiring harness connects the appliance's control or component circuits to restore reliable electrical connections and proper function. It replaces a damaged or worn harness to stop intermittent power, control errors, or non-working components. What it does:

• Carries electrical signals between the control board and sensors/components.
• Replaces frayed, burnt, or broken wires that cause intermittent operation or component failure.
• Helps resolve control board communication errors or circuits that won't power.
• Restores secure plug-and-play connections when original connector ends are damaged.

• One wiring harness, single

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Route wires along existing clips and channels; avoid sharp edges and hot surfaces.

This connector nozzle attaches to the appliance's nozzle assembly to route fluid through the system and help maintain a sealed connection. It replaces a worn or cracked nozzle connector to restore proper flow and reduce leaks. What it does:

• Provides a secure connection point for the nozzle assembly, directing fluid through the correct pathway
• Restores a sealed joint to prevent drips or steady leaks at the nozzle area
• Helps eliminate flow interruptions caused by a cracked, split, or damaged connector
• Works as a direct-fit replacement when the original connector is broken or degraded

• One connector nozzle

• Turn off power and shut off the water supply before starting any repair
• Remove only the components necessary to access the nozzle area; use basic hand tools
• Check seals and adjoining hoses for wear and replace if needed to ensure a leak-free connection

This single wire harness connects electrical components to restore power and signal routing for the appliance. It replaces a damaged or worn harness to help re-establish reliable electrical connections. What it does:

• Transfers power and signals between control boards, sensors, and actuators
• Helps resolve intermittent operation, failure to start, or component non-response when caused by wiring faults
• Replaces frayed, burned, or connector-damaged wiring to restore proper circuit continuity
• Matches OEM connector types and routing for a direct-fit replacement

• One single wire harness as shown

• Power off and unplug the appliance before beginning any repair
• Verify the harness routing and connector orientation match the original before securing
• Use appropriate tools and avoid pinching wires; replace any mounting clips that are damaged

This cabinet cover assembly is the outer trim piece that protects and finishes the appliance cabinet, keeping internal components and wiring concealed while restoring the appliance's appearance. It provides a secure, finished surface where the cabinet joins other panels. What it does:

• Covers and protects control boxes, wiring and internal components from dust and accidental contact
• Restores the appliance's exterior appearance when the original cover is cracked or missing
• Helps maintain correct panel alignment and reduces light leakage behind control areas
• Damaged or loose covers can cause visible gaps, vibration noise, or expose internal parts

• One cabinet cover assembly

• Always unplug the appliance or switch off power at the breaker before starting work
• Remove adjacent panels or trim as needed to access mounting screws; retain hardware for reassembly
• Handle edges carefully—use gloves to avoid cuts on metal or sharp plastic edges

This genuine replacement parts assembly restores the original hardware and connections in compatible LG appliances, helping return worn or damaged assemblies to proper fit and function. Use it to replace broken, loose, or non-functioning component groupings. What it does

• Replaces the original grouped components that secure and connect related parts within the appliance
• Restores proper mechanical fit and electrical connections where an assembly has failed or become loose
• Addresses symptoms such as loose panels, intermittent connections, or components that no longer align or engage
• Helps prevent further wear by restoring correct mounting and support for adjoining parts

• Disconnect power (and water, if applicable) before beginning any repair.
• Handle connectors and fragile components carefully; avoid bending contacts or stressing wiring.
• Match the assembly visually and by part number before installation to ensure compatibility.

This parts assembly is the factory replacement assembly used to restore proper operation by replacing a damaged or worn assembly. It installs in-line with existing components to recover normal function. What it does:

• Replaces a damaged or failing assembly that can cause intermittent or no operation
• Restores electrical and/or mechanical connections between related components
• Helps eliminate symptoms such as unresponsive controls, loss of function, or erratic operation
• Matches OEM fit and mounting points for a direct replacement

• Requires basic mechanical skills; verify power is disconnected before starting
• Compare the assembly to the original for orientation and connector matches before installation
• Use proper tools and follow manufacturer service instructions
• Handle connectors and wiring carefully to avoid damage

This inlet hose connects the home water supply to the appliance so it can fill properly. It replaces a worn or leaking supply hose to restore safe, reliable water flow for normal cycles. What it does:

• Directs incoming water from the household supply to the appliance inlet valve
• Works with the appliance's inlet valve and fittings to allow proper fill and rinse actions
• Commonly replaces hoses that leak, spray, kink, or block water flow
• Helps stop slow fills or intermittent filling caused by damaged or deteriorated hoses

• One inlet hose

• Turn off water supply and disconnect power before starting work
• Inspect and replace any damaged O-rings or fittings; use approved replacement fittings if needed
• Hand-tighten connections, then snug with a wrench—avoid over-tightening to prevent damage
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks

This drawer panel assembly restores the finished front of a refrigerator/freezer drawer, returning a clean appearance and proper fit. Designed to replace cracked, dented, or loose drawer fronts for a secure, finished look. What it does:

• Replaces damaged or cracked drawer front surfaces for improved appearance.
• Restores proper alignment and a snug fit to help the drawer close correctly.
• Replaces broken or worn mounting tabs that cause a loose or wobbly panel.
• Helps prevent drafts or gaps caused by a misshapen or damaged front.

• Disconnect power and empty the drawer before starting; follow appliance safety precautions.
• Basic hand tools are typically required; remove trim or screws securing the old panel to install the new one.
• Handle edges and mounting tabs carefully to avoid damage during installation.

This tub assembly is the washer's inner drum that holds and rotates laundry during wash and spin cycles, restoring proper agitation and spin performance for units with a damaged or worn drum. What it does

• Houses and tumbles clothes so water and detergent move through fabric during wash cycles
• Enables balanced spinning and high-speed rotation during the spin cycle
• A damaged or warped drum can cause loud banging, scraping noises, or clothes abrasion
• Cracks or severe damage may allow water to contact bearings or seals, causing further wear

• Disconnect power and water supply before beginning service
• Replacing the drum requires partial disassembly of the washer cabinet and suspension components; keep fasteners organized
• Inspect and replace related wear items (seal, bearings, spider/bolts) if they show damage