Wkg365bbq Parts

The Gasket is an OEM part for LG washers. This part creates a watertight seal between the door and the drum, preventing any leaks. It seals the door, keeping water from escaping during the wash cycle.

A bad door boot gasket can occur due to wear and tear, mold or mildew buildup, or physical damage. If you notice symptoms such as water leaking from the door, visible tears or cracks in the gasket, or a musty odor coming from your washer, it's time to replace the the worn-out or damaged door boot gasket with this genuine OEM part.

Symptoms of a bad door boot gasket include:

• Water leaking from the door
• Visible tears or cracks in the gasket
• Musty odor coming from the washer

This LG replacement part is also compatible with select Kenmore models.
 

This Taptite screw is a factory thread-forming fastener used to secure panels, brackets, and internal components where specified by the manufacturer. It forms threads as it drives for a secure, long-lasting hold when replacing a missing or damaged screw.

• Fastens covers, brackets, and internal parts at the designated mounting points
• Thread-forming "Taptite" design creates mating threads in the receiving hole for a snug fit
• Helps restore alignment and reduce vibration or rattling from loose hardware
• Typical symptoms: loose or misaligned panel/handle, rattles during operation, missing or stripped screw

• Disconnect power (and shut off water/gas if applicable) before servicing
• Replace only in the exact location specified for this part; match head style and length to the original
• Start by hand to avoid cross-threading; if resistance is high, back out and re-start
• Tighten until snug; do not overtighten to prevent stripping or cracking

A small mounting bracket that secures and supports internal appliance components to keep shelves, drawers or assemblies aligned and stable. Replaces a cracked, broken or missing supporter to restore proper fit and reduce movement. What it does

• Secures an internal component or assembly in place to prevent sagging or misalignment
• Stops rattling, wobble or looseness caused by a damaged or missing bracket
• Restores correct clearance and support for the associated shelf/drawer/assembly
• Helps maintain normal operation and prevents further wear on adjacent parts

• One supporter holder bracket

• Disconnect power before starting repairs; unplug or flip the appliance breaker
• Remove nearby shelves, drawers or panels to access the damaged bracket
• Inspect mating parts for damage and replace any worn fasteners as needed
• Use basic hand tools;

This inlet hose routes household water into the appliance so it can fill and operate correctly. Replacing a damaged inlet hose restores proper water flow and prevents leaks that can cause poor performance or water damage. What it does:

• Channels incoming water from the household supply into the appliance
• Stops leaks and restores normal fill when the original hose is cracked, split, or worn
• Helps correct symptoms like no water entering the appliance, slow or intermittent fill, or visible leaking at the hose connection
• Works with the appliance's valve and fittings to maintain a sealed water path

• Turn off the water supply and unplug the appliance before starting any work
• Inspect fittings and seals; replace any worn gaskets to ensure a watertight connection
• Hand-tighten connections then check for leaks; avoid overtightening plastic fittings

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

This power cord assembly restores a secure electrical connection to your appliance so it can safely receive power. It replaces a worn, damaged, or faulty cord to help prevent interruptions and poor contact during normal use. What it does:

• Re-establishes the appliance's main power connection for reliable operation
• Replaces frayed, burnt, or damaged cord insulation and terminals
• Can stop intermittent power loss, sparking, or poor contact at the cord connection
• Provides the correct OEM-fit electrical cord and connector interface

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely and avoid pinching or kinking the cord.

The High Limit Thermostat Kit is an OEM part for LG dryers. It acts as a safety device that prevents the dryer from overheating by cutting off power to the heating element if the dryer exceeds a certain temperature.

Common causes of a faulty thermostat include regular wear and tear, electrical issues, or a malfunction in the heating system that causes the thermostat to overwork.

Symptoms of a bad High Limit Thermostat include:

• Dryer not heating at all
• Dryer overheating or shutting off unexpectedly
• Clothes taking longer to dry
• The dryer being unusually hot to the touch

This OEM LG part is also compatible with Sears/Kenmore models.

Includes High limit and safety thermostats.

This multi-connector harness is the replacement wire assembly that links the appliance's control board to multiple components so signals and power flow correctly. Installing the correct harness restores reliable electrical connections and control response. What it does:

• Routes power and signal between the control board and connected components using multiple color-coded wires and connectors
• Replaces damaged, burnt, or frayed wiring that can cause intermittent operation or failure to start
• Prevents short circuits and poor connections that produce error codes or erratic performance
• Maintains correct connector pin layout for proper component communication

• One multi-connector harness (single assembly)

• Disconnect power before beginning work to avoid shock or damage
• Verify connector orientation and full seat on both ends; do not force mismatched plugs
• Inspect mating connectors and terminals for damage or corrosion before installation

This is an LG washer door assembly. The washer door ensures an air-tight seal between the door and washer so no water leaks out during use. If water is leaking from the washing machine during its cycles, this could be an indicator of a faulty door. The door not shutting properly could also prevent the machine from starting its cycle. This door is for a front-loading washing machine, which contain sensors that can tell when the door is shut. The washing machine will not start without engaging these sensors. Unplug the unit from its power sources before starting installation. This listing includes the hinges. Follow instructions for attaching the hinges to the appliance and the door. There are also plates that need to be installed that fasten the door shut, ensuring a tight lock during use.This door assembly is a genuine OEM replacement product sourced directly from LG. The listing is for an individual door assembly only, and there are no other parts included. This product is compatible with LG appliances.

This softener cap seals and directs fabric softener within the washer dispenser to prevent leaks and ensure proper dispensing. Replacing a damaged cap restores correct softener flow and helps avoid dispenser drips or residue buildup. What it does

• Seals the fabric softener compartment to prevent leaks during fill and agitation
• Directs softener into the wash at the correct cycle, helping prevent early-release or pooling
• Reduces dispenser residue and clogs caused by cracked or warped caps
• Commonly replaced when the cap is cracked, missing, or no longer forms a proper seal

• One softener dispenser cap as shown

• High-level replacement — remove the dispenser assembly cover before swapping the cap
• Power off and disconnect the washer before servicing to avoid electrical or mechanical injury
• Handle small plastic parts carefully to avoid damage; test dispenser operation after reassembly

This is the rear tub drum for the washer's drum assembly; it supports the inner drum and helps keep loads balanced so the washer can tumble and spin properly. Use this part to restore stable drum rotation and reduce rubbing or banging noises. What it does:

• Supports the inner wash basket and maintains proper alignment during spin cycles
• Keeps the drum centered to prevent rubbing against the cabinet or seal
• Helps reduce loud banging, wobbling or excessive vibration during operation
• Works with the tub seals, bearings and suspension to maintain smooth rotation

• One rear tub drum

• Disconnect power and water before beginning any repair
• This is a major drum component; expect to remove the outer cabinet and other assemblies to access it
• Support the inner drum while separating components; bearings, seal and hardware may need inspection or transfer