Wm36708av Parts

This bolt assembly is a direct-fit mounting fastener used to secure components on compatible LG appliances, restoring firm attachment and reducing movement or vibration where a loose or damaged bolt causes issues. What it does:

• Secures panels, brackets or hinge components to keep parts aligned and stable
• Prevents loosening that can cause rattling, vibration or noisy operation
• Helps restore proper alignment of doors or mounted assemblies when a worn or broken bolt is the cause
• Simple replacement to address visible damage, stripped threads, or missing hardware

• Disconnect power and unplug the appliance before starting any repair
• Use appropriate hand tools; avoid power tools that can overtighten or strip threads
• Replace only the damaged bolt(s); match thread size and seating before final tightening

This complete door assembly replaces a damaged or broken front door to restore safe access and proper sealing. It provides the exterior door surface and mounting points so the appliance closes and operates as intended. What it does:

• Replaces a cracked, dented, or warped door that prevents proper closure
• Provides the door surface and mounting/latch area required for proper sealing
• Restores a solid, secure closing action so the appliance can run normally
• Helps eliminate gaps that can allow heat, moisture, or noise to escape
• Covers and protects internal components behind the door

• Disconnect power and water before starting any repair
• Handle carefully to avoid injury from sharp edges or glass; wear gloves
• May require removal of trim or screws and alignment of hinge pins during installation

The Shipping Bolt is an OEM part for LG washing machines, designed to secure the washing machine's drum during transportation. These bolts are important for preventing damage to the drum and suspension system by immobilizing the drum, thereby avoiding any excessive movement or vibrations that could occur while moving the appliance. 

Causes of a bad shipping bolt can include improper removal during installation, damage from handling, or degradation over time if it was left in place during operation. A damaged or missing shipping bolt can lead to issues with the washing machine's drum alignment and overall stability.

Symptoms that indicate the shipping bolts need removal or installation include:

• Excessive noise or vibrations during operation, suggesting the bolts were not removed after installation.
• Damage to the washing machine's drum or suspension system after moving the appliance without the bolts properly installed.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

The Stator Assembly is an OEM replacement part for LG washing machines. It is an electrical component inside the motor that converts rotational motion to electrical energy to power spinning motions.  Note: For the RPS or Hall Sensor, order part number AP7015078.

Symptoms of a faulty stator include:

• Slow or inefficient spinning, rubbing noises  
• The machine failing to fully drain or spin clothes
• Repeated blowouts or failure of related motor components

Causes can be wear and tear over extended use. Environmental factors like dust and moisture exposure may degrade insulation integrity. 

This OEM stator is also compatible with some Kenmore front-load washer models.

Includes sensor probe

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

This main PCB power control board assembly replaces a failed control board to restore appliance control and power distribution. It provides the central electronics that manage user commands, power routing, and coordinated operation. What it does

• Manages power distribution and control signals for the appliance's functions.
• Interfaces with user controls and display circuits to process commands.
• Helps resolve symptoms such as no power or intermittent power, unresponsive controls, or erratic operation when caused by a faulty board.
• Stops further electrical control issues when the board itself is the confirmed fault.

• One main PCB power control board assembly.

• Always disconnect power before attempting service to avoid shock or injury.
• Take photos or label wiring and connectors before removal to ensure correct reassembly.
• Handle the PCB by the edges and avoid static discharge—use ESD protection if available.

The Dispenser Assembly is an OEM part for LG washing machines. It is responsible for housing and dispensing the detergent, fabric softener, or other laundry additives at the appropriate times during the wash cycles.

Causes of a faulty dispenser assembly can include clogging or blockages in the dispenser mechanism, damage to the dispenser drawer, latch, or electronic components controlling the dispensing process.

Symptoms of a bad dispenser assembly include:

• Detergent or fabric softener not being dispensed properly
• Leaks or drips from the dispenser area
• The dispenser drawer, door, or compartments not opening or closing correctly

This OEM LG part is also compatible with some Kenmore models.

This control panel assembly is the appliance's front user interface, providing the buttons/touchpad and display needed to select cycles and view status. Replacing a damaged or unresponsive panel restores normal control and feedback. What it does:

• Houses the buttons/touchpad and display that let you select cycles, options, and monitor status.
• Replaces panels with cracked faces, non-working buttons, unresponsive touch controls, or a blank/displayed-incorrect information.
• Restores front-panel control when the appliance does not respond to user input or will not start from the control pad.
• Interfaces with the appliance's wiring harness and internal control electronics to relay commands.

• Always disconnect power (unplug or shut off breaker) before replacing the panel.
• Handle the panel and any ribbon cables or connectors carefully to avoid damage.
• Verify connectors are fully seated and routed as original before reassembling the appliance.
• If symptoms persist after replacement, inspect the main control board and wiring for faults; do not modify or alter the part.

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

This outer tub cover protects the washer's drum assembly and helps keep water and components contained during operation. It replaces a worn or damaged cover to restore proper sealing and prevent leaks or debris intrusion. What it does:

• Covers and protects the washer tub and internal components from water, lint, and foreign objects.
• Helps maintain proper alignment and sealing of the tub during wash cycles.
• Commonly replaced for visible damage, cracks, or when leaks appear around the tub area.
• Supports stable drum operation by keeping internal components enclosed.

• Disconnect power and turn off water supply before starting any repairs.
• Installation may require removing the cabinet or drum assembly; follow the service manual for step-by-step guidance.
• Handle the cover carefully to avoid scratching or bending mounting tabs.