Wm3700hra Parts

This washer drum lifter (baffle) mounts inside the drum to raise and tumble clothes as the basket turns. Replace a cracked or missing lifter to restore wash action, help protect fabrics, and reduce rattling noises.

• Attaches to the inner drum and lifts garments during rotation for effective tumbling
• Helps distribute loads and improve mechanical cleaning action
• Direct replacement for lifters that are cracked, loose, sharp-edged, or missing
• Typical symptoms: poor tumbling/wash results, thumping or rattling from the drum, clothing snags or tears, lifter wobbling or fallen off

• Disconnect power and turn off water supply before servicing
• Open the door and rotate the drum to access the lifter
• Depending on model, release locking tabs from inside the drum or remove the retaining fastener; align and secure the new lifter
• Ensure the lifter is fully seated and secure; run a short rinse/spin to verify proper operation

This Cover Cap replaces a missing or damaged cosmetic cap to restore a clean finished appearance and help protect underlying fasteners and openings from dirt. It's a simple, low-cost fix for visible damage. What it does:

• Covers and conceals exposed screw heads, fastener holes, or trim openings for a finished look
• Helps limit dirt and debris accumulation in small openings
• Useful when the original cap is cracked, broken, or lost
• Restores appliance aesthetics without replacing larger panels

• High-level: typically snaps or presses into place; may require removing the adjacent trim or panel for access
• Disconnect power and water (if applicable) before removing panels to avoid electrical or water hazards
• Use gentle prying with a plastic trim tool to avoid scratching surrounding surfaces

The Display Control Board is an OEM component specifically designed for LG front-load washing machines. It manages the washer's user interface, enabling control of cycles, options, and preferences through the digital display.

Symptoms of a bad Display Control Board include:

• Glitchy or unresponsive buttons that don't initiate selections
• Faded, pixelated, or blank readout that doesn't convey settings  
• Inability to scroll through cycles or change parameters
• Frequent error codes obscuring the display 

Overextended use can cause circuit degradation within the board. Accidental water damage also risks damage. Replacing with this genuine LG part restores simple, clear operation through an informative display. Owners comfortably manage the appliance. This board fits Sears/Kenmore models as well.

Customized machine screw for select washers that fastens specific assemblies and resists vibration. Replace a missing, stripped, or damaged factory screw to restore a solid, rattle-free fit and proper component alignment.

• Secures designated brackets, panels, or housings per the manufacturer's specifications
• Maintains alignment and stability under high-speed spin and vibration
• Replaces missing, corroded, or stripped hardware to stop looseness and noise
• Use when the original screw is worn, damaged, or lost

• Unplug the appliance and shut off water before servicing
• Support the component while removing/installing screws
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep screws organized—lengths and styles may vary by location

This dispenser assembly replaces a damaged or worn refrigerator ice and water dispenser housing to restore user access to chilled water and dispensed ice. It provides the mounting and user-facing components required for normal dispenser operation. What it does:

• Replaces the dispenser housing and bezel that guide water and ice to the user
• Restores proper alignment of the dispenser lever/actuator for reliable dispensing
• Helps stop leaks or dripping when the dispenser opening or funnel is cracked
• Works with internal valves and switches to permit normal dispense functions

• One dispenser assembly

• Disconnect power and shut off the refrigerator water supply before starting
• Remove the refrigerator door inner panel and any trim to access the dispenser module
• Handle plastic trim and tabs carefully to avoid breakage; use proper trim tools if available
• After installation, restore water, check for leaks, and test water/ice dispensing

This knob assembly replaces a damaged or missing control knob so you can securely and accurately set cooktop or oven controls. Durable replacement restores tactile grip and proper engagement with the control shaft. What it does:

• Replaces a cracked, melted, stripped, or loose control knob that won't turn or stay in position
• Provides correct spline engagement for consistent selection of heat or function settings
• Restores safe, predictable control response when adjusting temperature or burner level
• Helps prevent accidental slips or improper control input from worn knob surfaces

• One knob assembly

• Disconnect power to the appliance before servicing; for gas ranges also shut off the gas supply
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob resists, verify correct orientation—do not force or hammer the part into place
• If the control shaft or switch is damaged, replace the underlying control/switch assembly rather than relying on the knob

This multi wiring harness connects control circuitry to multiple components, restoring reliable electrical pathways for proper operation. It replaces a damaged or frayed harness to help eliminate intermittent power, unresponsive controls, or component failures caused by wiring faults. What it does

• Routes power and signals between the control board and several appliance components.
• Re-establishes secure electrical connections when original wires are broken, burnt, or corroded.
• Can address symptoms such as intermittent operation, components not receiving power, or erratic behavior tied to wiring faults.
• Uses OEM-style connectors and wiring lengths to match factory routing for a proper fit.

• One multi wiring harness as shown

• Always disconnect power (unplug or shut off breaker) before servicing the appliance.
• Handle connectors by the housings—do not pull on wires—and ensure all plugs fully seat with audible clicks.
• Route the harness following original wire paths and secure with existing clips or ties to prevent contact with moving or hot parts.

This DC pump motor assembly drives the appliance pump to move and remove water during drain and circulation cycles. It restores pump operation so the washer/dishwasher can empty properly and avoid standing water. What it does:

• Powers the drain/recirculation pump to move water out of the tub during drain and wash cycles.
• Common repair when the appliance fails to drain, leaves standing water, or shows drain-related errors.
• Helps restore normal water flow for wash, rinse and drain sequences.

• Disconnect power (and water, if applicable) before servicing the appliance.
• Inspect hoses, filters and the pump housing for clogs before replacing the motor.
• Note connector orientation and mounting location; transfer gaskets/seals if the original must be reused.

This main control PCB is the appliance's primary power and logic board that controls major functions and cycles, restoring electronic control when the original board fails. Designed as a direct-fit replacement to regain reliable operation. What it does:

• Regulates power distribution and supplies control signals to motors, valves, and sensors
• Interprets user inputs and runs cycle logic for timed operations
• Monitors sensor feedback and coordinates safety interlocks
• Resolves symptoms like no power, unresponsive controls, error codes, or intermittent operation
• Replaces a failed or damaged main control board to restore electronic control

• One main control PCB (power board assembly) as shown

• Disconnect power and water before attempting replacement
• Handle the board by edges and avoid static discharge; use anti-static precautions
• Verify connector orientations and secure all plugs; double-check wire routing before reassembly

This connector hose replaces the appliance's water connection to restore secure water flow and reduce the risk of leaks or interrupted dispenser/ice-maker operation. It's a direct replacement for a damaged or leaking supply connector. What it does:

• Connects the household water supply to the appliance's internal water valve or dispenser.
• Restores reliable water flow when a cracked, split, or collapsed hose prevents proper delivery.
• Reduces water leakage caused by worn or damaged connector ends and seals.
• Commonly needed when you see visible leaks, no water to the dispenser/ice maker, or a loose/broken hose connection.

• Turn off water supply and unplug the appliance before replacing the hose to avoid electric shock or water damage.
• Use proper clamps and fittings; make sure connections are seated and tightened just enough to stop leaks—do not overtighten.
• After installation, restore power and water, then check all connections carefully for leaks. Replace immediately if the hose or fittings show signs of damage.

This bolt assembly secures the washer's tub for transport, helping protect the suspension and internal components when moving the appliance. Replace lost or damaged shipping hardware so the drum stays locked and protected in transit.

• Locks the tub to minimize movement during transport or shipping
• Helps prevent damage to shocks, springs, hoses, and wiring while moving
• Replaces stripped, bent, or missing shipping bolts
• Use when relocating the appliance or returning it for service

• Unplug the appliance and turn off water before preparing to move it
• From the rear of the cabinet, thread the bolt into the designated shipping-bolt location and tighten until snug; do not overtighten
• Install all required shipping bolts for your model before transport; keep the unit upright while moving
• Remove all shipping bolts before operating the washer and save them for future moves

A replacement hose clamp that secures a flexible hose to its fitting to help prevent leaks and disconnections. Restores a tight, reliable seal so hoses stay seated during normal use. What it does:

• Holds a rubber or plastic hose firmly to a pump, valve or connection to prevent leaks.
• Helps stop hose pull-off that can cause water leaks or appliance interruptions.
• Commonly replaced when clamps are corroded, bent, cracked or missing.
• Works as a low-cost repair to restore a secure hose connection without replacing the hose assembly.

• Disconnect power to the appliance and shut off the water supply before servicing.
• Use the correct tool (slip-joint pliers for spring-style clamps or a screwdriver for screw-type clamps) and avoid pinching the hose.
• Inspect the hose and fitting for damage; replace the hose if it's cracked or excessively worn.
• After installing, restore power/water and run a short test cycle or check for leaks.

This holder assembly secures and positions internal components so the appliance's parts stay aligned and operate smoothly. Replacing a worn or broken holder helps stop rattling and restores proper fit where parts connect. What it does:

• Supports and locates adjacent components to maintain correct alignment
• Prevents excess movement that can cause noise or wear
• Helps ensure proper engagement of the associated trim or functional part
• Common symptom: loose, rattling, or misaligned components near the mounting area

• Designed to replace the original holder; fit with the part number before ordering
• Basic hand tools required; access panel removal may be necessary
• Disconnect power before beginning service to avoid shock or injury
• If clips or screws are damaged, replace them with equivalent hardware for a secure fit

The Power Cord Assembly is an OEM replacement part for LG front-loading washing machines. As the primary connection to household electricity, this cord safely delivers the required voltages to internal components.

Causes of a damaged or defective cord typically involve accidental cuts, abrasions or punctures accumulated over time. Repeated bending stresses during installations can prematurely crack insulation as well.

Symptoms of a problematic power cord include: 

• Inability to power "On" when plugged in  
• Tripped breakers or ground fault outlets
• Visible wire fraying or other signs of compromised integrity

This OEM assembly fits some Kenmore/Sears machines and protects against potential shock or fire hazards.

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

This tub assembly is the inner drum component for compatible front-load washers, providing the rotating basket that holds laundry during wash cycles for effective tumbling and water drainage. What it does

• Replaces the washer's inner drum that holds and tumbles clothes during wash and spin cycles.
• Restores proper rotation to reduce rubbing, grinding, or noisy operation caused by a damaged drum.
• Helps ensure proper water drainage and balanced spinning when the drum is intact and centered.
• Can resolve symptoms like loud thumping, scraping noises, or clothes catching on a damaged drum surface.

• Disconnect power and water supply before beginning any repair.
• Drum assemblies are heavy — get a helper and use proper lifting technique.
• Installation typically requires removing the washer cabinet and drive components; follow the OEM service manual or a step-by-step guide.