Wm3770hva Parts

This holder assembly secures and positions internal components so the appliance's parts stay aligned and operate smoothly. Replacing a worn or broken holder helps stop rattling and restores proper fit where parts connect. What it does:

• Supports and locates adjacent components to maintain correct alignment
• Prevents excess movement that can cause noise or wear
• Helps ensure proper engagement of the associated trim or functional part
• Common symptom: loose, rattling, or misaligned components near the mounting area

• Designed to replace the original holder; fit with the part number before ordering
• Basic hand tools required; access panel removal may be necessary
• Disconnect power before beginning service to avoid shock or injury
• If clips or screws are damaged, replace them with equivalent hardware for a secure fit

The Power Cord Assembly is an OEM replacement part for LG front-loading washing machines. As the primary connection to household electricity, this cord safely delivers the required voltages to internal components.

Causes of a damaged or defective cord typically involve accidental cuts, abrasions or punctures accumulated over time. Repeated bending stresses during installations can prematurely crack insulation as well.

Symptoms of a problematic power cord include: 

• Inability to power "On" when plugged in  
• Tripped breakers or ground fault outlets
• Visible wire fraying or other signs of compromised integrity

This OEM assembly fits some Kenmore/Sears machines and protects against potential shock or fire hazards.

The Display PCB Assembly is an OEM component specifically designed for LG front-loading washing machines. Located within the control panel, this printed circuit board coordinates interactions between users and the washer’s electronic components. Precise microchip programming processes commands to display cycles and temperature settings.   

Causes of a bad display PCB can include water damage corroding circuits over time, power surges damaging microchips, or loose connections inhibiting full communication between the display and washer’s systems. Without a properly functioning interface board, homeowners cannot efficiently operate cycles and settings.

Symptoms of a bad display PCB include:

• Dim or unresponsive touch controls and LED displays  
• Stuck buttons that do not accept selection input
• Erratic warning beeps or tones within the washer cabinet
• Inability to select or advance desired cycles 

This LG OEM replacement ensures consistent laundry control performance. Compatible also with Kenmore front-loaders, it offers convenient repair through a seamless fit. 

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

This hose connector joins the water inlet hose to the appliance, restoring a secure, watertight feed for normal fill and wash cycles. Replaces a worn or damaged connection to stop leaks and ensure proper water flow. What it does:

• Connects the incoming water hose to the appliance inlet for stable water delivery
• Stops leaks caused by cracked, split, or loose connector fittings
• Helps restore normal fill behavior when a failed connector is preventing proper water flow
• Serves as a direct replacement for a damaged or corroded inlet connection

• Turn off and shut off the home's water supply and unplug the appliance before installing
• Remove the old connector and clean mating surfaces; inspect hose and clamps for wear
• Hand-start fasteners, then snug fittings—avoid over-tightening to prevent damage

This lifter is a replacement drawer support that helps hold and guide a refrigerator/freezer drawer for smooth, even operation. Restores proper alignment and reduces sticking or uneven movement. What it does:

• Supports and stabilizes a sliding drawer so it opens and closes smoothly
• Helps maintain proper drawer alignment and load distribution
• Worn or broken lifters can cause sagging, binding, or uneven drawer movement
• Replaces damaged or missing lifter hardware to restore normal drawer function

• Disconnect power and empty the drawer before starting any repair
• Remove the drawer or access panel per your model's service instructions to reach the lifter
• Install the new lifter in the same orientation and secure any retaining clips or screws; do not force parts into place
• If fasteners or adjacent guides are damaged, replace them as well for a secure fit

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

This replacement connector hose routes water between the refrigerator water valve and the dispenser or ice maker, restoring reliable water flow and helping prevent leaks. It's a direct-fit service part used where the factory hose is worn or damaged. What it does

• Connects the refrigerator water valve to the dispenser or ice maker, providing a sealed water path.
• Restores proper water and ice delivery when a cracked or leaking hose causes reduced flow or pooling.
• Helps prevent leaks by replacing brittle, cracked, or split tubing and fittings.
• Works with the original fittings and routing used by the manufacturer for a secure connection.

• One replacement connector hose.

• Turn off and disconnect the refrigerator's water supply and power before starting.
• Verify orientation and routing match the original hose; avoid sharp bends or kinks.
• Tighten fittings securely but avoid over-tightening; inspect for leaks after reconnecting water.

This is a replacement screw used to secure internal components and assemblies. It restores proper fastening when original screws are stripped, loose, or missing. What it does

• Secures panels, brackets, or small assemblies to prevent rattling and misalignment
• Restores proper fit when original fasteners are worn, stripped, or lost
• Helps stop vibration-related noise from loose parts
• Matches OEM fastening locations and thread style for intended application

• Screw as shown

• Unplug the appliance or disconnect power before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack plastic
• Keep small parts away from children and dispose of damaged fasteners

This control panel assembly provides the front-facing user interface and control surface for the appliance so you can select cycles, start and stop operations, and view status indicators. Replaces a worn, cracked, or unresponsive control surface to restore normal control function. What it does:

• Houses the push buttons/touch controls and status indicators used to set and start appliance cycles.
• Sends user commands to the appliance control circuitry so selections register and cycles begin.
• Common symptom: buttons or touch areas are unresponsive or intermittent.
• Common symptom: display or indicator lights dim, flicker, or do not illuminate.
• Common symptom: physical damage such as cracks, broken buttons, or worn legend markings.

• One control panel assembly.

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Access typically requires removing the front console or top panel; keep track of screws and clips.
• Handle the panel and any attached ribbon cables gently to avoid damaging connectors.

This connector nozzle is the small replacement plumbing piece that directs water between internal components, restoring proper spray and flow where a worn or damaged nozzle causes leaks or weak/erratic water delivery. What it does

• Channels water from the supply path to the spray/nozzle outlet to maintain correct flow
• Keeps seals and adjoining fittings aligned to prevent leaks
• Replaces cracked, clogged, or broken nozzle pieces that cause weak spray or misdirected water
• Helps stop dripping or continuous flow caused by damaged connector ends

• Connector nozzle

• Disconnect power and water supply before attempting repair
• Handle carefully to avoid damage to mating surfaces and seals; replace any worn gaskets
• Basic hand tools typically required; follow your appliance's service manual for disassembly and torque guidance