Wm407ohva Parts

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

This lamp assembly restores the interior drum light in your washer, improving visibility when loading and unloading. Replace a failed or damaged light to clearly see items and check the tub at a glance.

• Illuminates the washer drum when the door/light function is active
• Replaces a burned-out, flickering, or physically damaged lamp assembly
• Connects to the existing wiring harness and mounts in the factory location
• Symptoms include: drum light not turning on, intermittent flicker, or a cracked lens/housing

• Unplug the appliance before servicing; turn off water supply if opening the cabinet
• Access varies by model; may require removing the top/front panel and door boot clamp
• Disconnect the wiring connector carefully, seat the new assembly fully, secure it, and verify light operation before reassembly

This pivot hanger assembly supports and stabilizes the appliance component it mounts to, restoring smooth movement and alignment. Replace a worn or damaged pivot to reduce noise and prevent misalignment that can affect operation. What it does:

• Acts as the pivot point for the hanger to support the drum/door assembly and maintain correct alignment
• Helps eliminate squeaks, scraping, or jerky motion caused by a worn pivot
• Prevents sagging or uneven movement that can lead to rubbing or binding
• Restores proper mechanical support so the appliance operates quietly and reliably

• Unplug the appliance or disconnect power before beginning any repair
• Basic hand tools may be required; follow the appliance service manual for disassembly steps
• Inspect surrounding components (mounts, bearings, fasteners) and replace if worn

Locking pin for shock absorber.

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

This inlet hose routes household water into the appliance so it can fill and operate correctly. Replacing a damaged inlet hose restores proper water flow and prevents leaks that can cause poor performance or water damage. What it does:

• Channels incoming water from the household supply into the appliance
• Stops leaks and restores normal fill when the original hose is cracked, split, or worn
• Helps correct symptoms like no water entering the appliance, slow or intermittent fill, or visible leaking at the hose connection
• Works with the appliance's valve and fittings to maintain a sealed water path

• Turn off the water supply and unplug the appliance before starting any work
• Inspect fittings and seals; replace any worn gaskets to ensure a watertight connection
• Hand-tighten connections then check for leaks; avoid overtightening plastic fittings

This replacement cover cap restores the appliance's appearance while protecting the underlying hardware from dust and debris. It's a small trim piece that keeps fasteners concealed and helps maintain a finished look. What it does:

• Covers and protects mounting hardware and openings from dirt, lint and moisture
• Restores cosmetic finish where the original cap is cracked, faded or missing
• Keeps fasteners from catching on clothing or items during use
• Helps maintain a secure fit and prevents accidental contact with exposed components

• Disconnect power to the appliance before attempting any service.
• Remove any surrounding trim or panels as needed to access the mounting area.
• Press or snap the cap into place; some installations may require a small screwdriver to release retainers—avoid forcing the part to prevent damage.
• Replace damaged fasteners or retainers before installing the new cap.

This outer housing case protects internal components and provides the appliance's external structure for reliable operation and a finished appearance. It helps keep parts aligned and shields electronics and mechanisms from debris and damage. What it does:

• Covers and protects internal components from dust and accidental contact
• Keeps internal modules properly positioned and supported
• Restores the appliance's exterior appearance and structural integrity
• Stops rattles or vibrations caused by a damaged or missing panel

• One outer housing case

• Disconnect power and water before beginning any repair
• Handle panel edges carefully to avoid cuts or cosmetic damage
• Use manufacturer-recommended fasteners; do not overtighten screws

A complete replacement door assembly that restores the appliance's barrier, fit and appearance. Replaces a damaged, dented or cracked door so the appliance closes properly and looks like new again. What it does:

• Restores the door panel, edges and mounting points so the door seals and aligns correctly
• Replaces cosmetic damage like dents, scratches or cracked panels
• Helps stop air leaks and temperature loss when the original door is bent or warped
• Provides the mounting surface for handles, hinges and any attached hardware

• Disconnect power to the appliance before starting and work with the appliance empty
• This assembly is large and may require two people to handle and install safely
• Installation typically requires removing hinge fasteners and transferring any handles, trim or gaskets from the old door
• Follow manufacturer instructions and replace any damaged fasteners or seals for a secure fit

This is a hinge assembly for the refrigerator door that restores smooth, aligned door movement and helps the door close properly. Replaces a worn or damaged hinge to stop sagging, rubbing, or uneven gaps. What it does:

• Provides the pivot and mounting points that let the door open and close smoothly
• Corrects door misalignment and eliminates sagging or binding
• Helps seals seat evenly so the door can fully close
• Replaces corroded, bent, or broken hinge hardware that causes noise or uneven operation

• One hinge assembly

• Disconnect power to the appliance before starting and remove any door contents
• Follow OEM instructions for removing the door and supporting it while replacing the hinge
• Use proper hand tools; fasteners may require holding the door in position during reassembly
• If hinge includes grease or bushings, inspect and retain/replace as needed per OEM guidance

This cabinet cover is the outer trim panel that protects and finishes the appliance's cabinet area, restoring appearance and shielding internal components from dust and damage. It replaces a cracked, dented, or missing outer panel to improve fit and look. What it does:

• Covers and protects the appliance cabinet, helping keep internal parts free of dust and debris
• Restores the exterior appearance when the original panel is dented, cracked, or missing
• Helps maintain proper alignment of adjacent trim and doors
• Reduces exposure that can lead to corrosion or additional damage

• One cabinet cover (outer trim panel)

• Disconnect power to the appliance before starting any repair
• Removal/replacement typically requires removing adjacent trim or fasteners; keep all hardware for reinstallation
• Handle edges carefully; metal edges can be sharp