Wmcd2050h0wx Parts

This double-style hinge bushing supports the washer lid hinge pin and provides a smooth bearing surface. Replacing a worn bushing restores quiet, even lid movement and helps keep the lid properly aligned over time.

• Supports and centers the lid at the hinge
• Provides a low-friction bearing surface for the hinge pin/rod
• Helps reduce squeaking, looseness, and metal-on-metal wear
• Can help resolve a wobbly, misaligned, or scraping lid

• Disconnect power before servicing; support the lid to prevent dropping
• Remove the hinge pin/rod or screws as your model requires to access the bushing
• Pry out the worn bushing and press the new bushing fully into the hinge opening
• Reassemble and check lid operation; consider replacing the opposite-side bushing if worn

Outer tub cover kit that replaces a cracked or missing washer tub cover, protecting the inner tub and helping stop rubbing, noise and fabric snags. Restores proper tub clearance for smoother drum movement and quieter operation. What it does:

• Covers the outer wash tub to protect the inner tub and fasteners from contact and wear
• Helps stop rubbing, scraping or thumping sounds caused by tub-to-tub contact
• Reduces the chance of clothes catching between the inner and outer tubs
• Restores correct tub spacing so the drum spins without interference

• Disconnect power and water supply before starting any repair
• Access may require removing the agitator or inner tub and using basic hand tools
• Inspect mounting clips, seals and surrounding components and replace any damaged items
• Test the washer on a short cycle after installation to ensure proper fit and quiet operation

This tub clamp secures the washer tub or associated hoses to keep components aligned and sealed during operation. It replaces a worn or broken clamp to reduce movement and help prevent leaks and noise. What it does:

• Holds the tub/hose connection or tub assembly parts together to maintain a tight fit
• Helps prevent leaks caused by loose or damaged clamps
• Reduces rubbing, vibration, and associated noise from a loose tub assembly
• Restores proper component alignment after clamp failure

• Disconnect power and turn off water supply before starting any repair
• Inspect mating parts (tub, hoses, mounting points) for damage and clean before installing
• Use appropriate clamp pliers or screwdriver as required; ensure clamp is seated and tightened evenly

Nickel

5/16-18 tpt ihw s n

A small push-in plug button used to fill or cover an access hole or trim opening and restore a finished appearance. Designed to snap into place for a secure fit and to keep dirt and moisture out. What it does:

• Covers unused holes or fastener openings to restore a finished look
• Helps keep dirt, moisture, and debris from entering cavities
• Holds trim or panels flush by filling gaps where a fastener or post is missing
• Commonly replaced when cracked, lost, loose, or causing rattles or gaps

• One plug button

• Disconnect power to the appliance before accessing panels or trim
• Typically snaps into place—press firmly until seated; may require removing trim for access
• Avoid prying with sharp tools that can damage surrounding surfaces
• Replace only with the exact part number to ensure proper fit and finish

A replacement wireform hinge that supports and guides a range appliance door during opening and closing, helping restore smooth, secure door movement and alignment. Durable formed steel construction resists bending under normal use. What it does:

• Provides structural support for the appliance door and keeps it aligned while opening and closing
• Maintains correct door movement to prevent binding, sagging, or uneven gaps
• Replaces bent, broken, or worn hinge wireforms that cause noisy or unstable doors
• Works with the existing hinge assembly to restore safe, consistent operation

• One wireform hinge

• Basic hand tools typically required; follow manufacturer service manual for access and removal steps
• Disconnect power (and gas if applicable) and allow appliance to cool before beginning work
• Support the door during removal/installation to prevent dropping or damage

This coin-op control assembly replaces the coin collection and cycle-start control used on commercial laundry machines to restore timed wash cycles and coin-operated functionality. It helps machines accept payment and start selected cycles reliably. What it does:

• Controls coin validation/acceptance and enables cycle start when required payment is received
• Activates timed wash or dry cycles via the machine's timer circuit
• Commonly used when washer/dryer fails to start, does not accept coins, or cycles won't initiate
• Interfaces with the machine's wiring harness and timer to manage payment-to-start operation

• Disconnect power and follow lockout/tagout procedures before installation
• Verify harness connectors and mounting orientation before finalizing installation
• Handle electrical connections carefully; ensure all connectors are fully seated

Size: 1/4 - 20 b.

Black. Right hand side