Wmcd2050jiwc Parts

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This power line filter sits between household AC and the washer's internal wiring to reduce electrical interference and help stabilize control operation. Replacing a failed filter may restore power and prevent nuisance breaker or GFCI trips.

• Filters incoming AC power to reduce electromagnetic interference reaching the control and motor circuits
• Helps prevent interference-related issues like erratic controls or random resets
• Failure may present as no power/blank display, intermittent power loss, or tripping a breaker/GFCI
• Visual clues of failure can include scorching, swelling, or a cracked housing

• Unplug the washer or switch off the circuit breaker before servicing; allow a few minutes for internal components to discharge
• Access the filter location (often near the control area or rear panel) per your model's service information
• Note wire locations (LINE, LOAD, and GROUND) and move one lead at a time to avoid miswiring
• Mount securely and ensure the ground connection to the cabinet is tight for proper operation

This tub clamp secures the washer tub or associated hoses to keep components aligned and sealed during operation. It replaces a worn or broken clamp to reduce movement and help prevent leaks and noise. What it does:

• Holds the tub/hose connection or tub assembly parts together to maintain a tight fit
• Helps prevent leaks caused by loose or damaged clamps
• Reduces rubbing, vibration, and associated noise from a loose tub assembly
• Restores proper component alignment after clamp failure

• Disconnect power and turn off water supply before starting any repair
• Inspect mating parts (tub, hoses, mounting points) for damage and clean before installing
• Use appropriate clamp pliers or screwdriver as required; ensure clamp is seated and tightened evenly

This funnel shower head directs water flow inside the dispenser, helping water reach the glass or icemaker chute reliably. It replaces a worn or cracked funnel to restore proper water direction and reduce splashing. What it does:

• Channels dispenser water so it flows where expected and limits splatter
• Replaces cracked, warped, or clogged funnel pieces that divert flow
• Restores secure fit inside the dispenser area for consistent performance
• Reduces leaks and dripping caused by damaged funnels

• Disconnect power and shut off water to the appliance before starting
• Remove the old funnel carefully to avoid damaging surrounding trim
• Press or snap the new funnel into place until fully seated; do not force
• Check connections and test dispenser for leaks after reassembly

Nickel

5/16-18 tpt ihw s n

A small push-in plug button used to fill or cover an access hole or trim opening and restore a finished appearance. Designed to snap into place for a secure fit and to keep dirt and moisture out. What it does:

• Covers unused holes or fastener openings to restore a finished look
• Helps keep dirt, moisture, and debris from entering cavities
• Holds trim or panels flush by filling gaps where a fastener or post is missing
• Commonly replaced when cracked, lost, loose, or causing rattles or gaps

• One plug button

• Disconnect power to the appliance before accessing panels or trim
• Typically snaps into place—press firmly until seated; may require removing trim for access
• Avoid prying with sharp tools that can damage surrounding surfaces
• Replace only with the exact part number to ensure proper fit and finish

A replacement wireform hinge that supports and guides a range appliance door during opening and closing, helping restore smooth, secure door movement and alignment. Durable formed steel construction resists bending under normal use. What it does:

• Provides structural support for the appliance door and keeps it aligned while opening and closing
• Maintains correct door movement to prevent binding, sagging, or uneven gaps
• Replaces bent, broken, or worn hinge wireforms that cause noisy or unstable doors
• Works with the existing hinge assembly to restore safe, consistent operation

• One wireform hinge

• Basic hand tools typically required; follow manufacturer service manual for access and removal steps
• Disconnect power (and gas if applicable) and allow appliance to cool before beginning work
• Support the door during removal/installation to prevent dropping or damage

This coin-op control assembly replaces the coin collection and cycle-start control used on commercial laundry machines to restore timed wash cycles and coin-operated functionality. It helps machines accept payment and start selected cycles reliably. What it does:

• Controls coin validation/acceptance and enables cycle start when required payment is received
• Activates timed wash or dry cycles via the machine's timer circuit
• Commonly used when washer/dryer fails to start, does not accept coins, or cycles won't initiate
• Interfaces with the machine's wiring harness and timer to manage payment-to-start operation

• Disconnect power and follow lockout/tagout procedures before installation
• Verify harness connectors and mounting orientation before finalizing installation
• Handle electrical connections carefully; ensure all connectors are fully seated